Ridea 6CBB ITA30 User manual

User Manual
Congratulations! You have purchased a piece of engineering that we at Ridea have made with passion. Enjoy your rides with your Ridea component as much as we enjoyed making it.
Important notice
Thank you for your purchase of a Ridea product. Please read thoroughly this user manual before proceeding with the installation of your new bottom bracket. Although the installation process of
your Ridea 6CBB is easy to follow, we recommend taking your bottom bracket to a professional bicycle mechanic with specialized tools to perform the installation.
6CBB
ITA30
Contents
• 2x BB cups
• Center sleeve
• 2x bearing shields
• 2x 1mm & 2x 2mm chainline adjusters
(compatible with spindles of 30 and 29 mm)
Note about non-30 mm spindle cranksets
This basic kit of 6CBB ITA includes the necessary items to install your new BB
on an Italian threaded frame shell to be used with cranksets with spindles of
30 mm in diameter. If your crankset has a different spindle design (29, 25,
24 mm) please refer to the Spindle Sleeve Kit manual to install your BB.
Product number BB shell ⌀/ width Frame BB Spindle Crankset Spindle Kit
#CN ITA 30 M36x24 / 70 mm
Italian
threaded
⌀30 BB386EVO
BB392EVO N/A
⌀29 BB29/DUB YES
⌀25 CAMPAGNOLO YES
⌀24 BB24/SHIMANO YES
Chainline
Adjusters
Center Sleeve
BB Cups
Bearing Shields

Ridea Group Ltd. No.53-63 Gouqian Lane, Gouqian Village, Lukang Township, Changhua County, 50567, Taiwan + 886 4 771 5639 [email protected] www.rideabikes.com
Bottom bracket maintenance
Use mild soap or a specialized bicycle cleaning product to clean your bicycle. When
cleaning the bottom bracket area, do not use high-pressure water to avoid water from
soaking into the bottom bracket shell.
Depending on the weather conditions and riding style, you may need to uninstall your
bottom bracket to perform a deeper cleaning and re-greasing. The frequency of this service
depends on riding conditions. Note that servicing the bearings from a bottom bracket is a
specialized task that should be performed by qualified bicycle mechanics. Please note that
if your bearings are worn, a deep cleaning and re-greasing may still not make your bottom
bracket works without issues. If your bearings are worn, please contact to a Ridea dealer.
They will help you to determine whether they can be replaced by new ones or if a replacing
Warranty
Ridea Group Ltd. warrants this product against defects in materials or workmanship for
a period of two (2) years from the original date of purchase (one [1] year for bearings).
Alternatively, bottom brackets with stainless steel rings (identified by a blue dust cover) are
warranted for a period of four (4) years. This warranty does not cover damage or failure
resulting from misuse, abuse, alteration, neglect, crash or impact, improper installation and
maintenance and normal and reasonable wear. If you think you have a warranty claim,
please contact the bike shop where you bought your product for more details.
of the whole bottom bracket unit is required.
Chainline adjusters
Chainline adjusters can be used to adjust your chainline. Please install them
during the installation of your crankset (between the BB cup and the crank) in
case your crankset and frame combination requires any chainline adjustment.
Installation steps
1. Clean thoroughly the frame BB shell. Pay special attention to the BB shell
threads to make sure they are in good shape and no external particles are
present. To prevent damage to your 6CBB, remove any decorative sticker that
may interfere between the 6CBB and the bike frame.
2. Apply carbon-compatible grease to the threads of both the BB cups and the
BB shell.
3. Insert both cups and the center sleeve. Thread the cups to 15 N·m. Both cups
thread into the BB shell clockwise.
Frame
Dowm Tube
Center Sleeve
Chainline Adjusters
(as needed)
Drive
Side
Clockwise
15 N·m
Clockwise
15 N·m
Bearing Shields
(both sides)
Same on both sides
Important note: To avoid any damage to the product, do not install any
chainline adjuster or any other kind of spacer or external element between the BB
cup and the bicycle frame.