Ridea 6CBB T47A User manual

User Manual
Congratulations! You have purchased a piece of engineering that we at Ridea have made with passion. Enjoy your rides with your Ridea component as much as we enjoyed making it.
Important notice
Thank you for your purchase of a Ridea product. Please read thoroughly this user manual before proceeding with the installation of your new bottom bracket. Although the installation process of
your Ridea 6CBB is easy to follow, we recommend taking your bottom bracket to a professional bicycle mechanic with specialized tools to perform the installation.
6CBB
3-2021
Contents
• Non-drive side cup
• Center sleeve
• Drive side cup
• 2x bearing shields
• 2x 1mm & 2x 2mm chainline adjusters
(compatible with spindles of 30 and 29 mm)
Note about non-30 mm spindle cranksets
This basic kit of 6CBB T47A includes the necessary items to install your
new BB on a T47 frame shell and on modified PF30, OSBB and BB386
shells with threads. Only cranksets with spindles of 30 mm in diameter are
compatible. If your crankset has a different spindle design (29, 25, 24 mm)
please refer to the Spindle Sleeve Kit manual to install your BB.
Product number BB shell ⌀/ width Frame BB Spindle Crankset Spindle Kit
#CN 47A 30
M47x1/61mm T47 (& mod
OSBB)
⌀30
FACT/BB30 N/A
M47x1/68mm T47 (& mod
PF30) BB30 N/A
M47x1/73mm T47 (& mod
PF30) FACT/BB30 N/A
M47x1/86.5mm T47 (& mod
BB386)
BB386EVO
BB392EVO N/A
⌀29 BB29/DUB YES
⌀25 CAMPAGNOLO YES
⌀24 BB24/SHIMANO YES
T47A
Chainline
Adjusters
Center Sleeve
BB Cups
Bearing Shields

Ridea Group Ltd. No.53-63 Gouqian Lane, Gouqian Village, Lukang Township, Changhua County, 50567, Taiwan + 886 4 771 5639 ser[email protected] www.rideabikes.com
Bottom bracket maintenance
Use mild soap or a specialized bicycle cleaning product to clean your bicycle. When
cleaning the bottom bracket area, do not use high-pressure water to avoid water from
soaking into the bottom bracket shell.
Depending on the weather conditions and riding style, you may need to uninstall your
bottom bracket to perform a deeper cleaning and re-greasing. The frequency of this service
depends on riding conditions. Note that servicing the bearings from a bottom bracket is a
specialized task that should be performed by qualified bicycle mechanics. Please note that
if your bearings are worn, a deep cleaning and re-greasing may still not make your bottom
bracket works without issues. If your bearings are worn, please contact to a Ridea dealer.
They will help you to determine whether they can be replaced by new ones or if a replacing
Warranty
Ridea Group Ltd. warrants this product against defects in materials or workmanship for
a period of two (2) years from the original date of purchase (one [1] year for bearings).
Alternatively, bottom brackets with stainless steel rings (identified by a blue dust cover) are
warranted for a period of four (4) years. This warranty does not cover damage or failure
resulting from misuse, abuse, alteration, neglect, crash or impact, improper installation and
maintenance and normal and reasonable wear. If you think you have a warranty claim,
please contact the bike shop where you bought your product for more details.
of the whole bottom bracket unit is required.
Installation steps
1. Clean thoroughly the frame BB shell. Pay special attention to the BB shell
threads to make sure they are in good shape and no external particles are
present. To prevent damage to your 6CBB, remove any decorative sticker that
may interfere between the 6CBB and the bike frame.
2. Note BB cups orientation (Drive and Non-Drive Side) and apply carbon-
compatible grease to the threads of both the BB cups and the BB shell.
3.Insert both cups and the center sleeve. Thread the cups to 15 N·m. The Non-
Drive Side cup threads into the BB shell clockwise and the Drive Side cup threads
counter-clockwise.
Chainline adjusters
Chainline adjusters can be used to adjust your chainline. Please install them
during the installation of your crankset (between the BB cup and the crank) in
case your crankset and frame combination requires any chainline adjustment.
Center sleeve adjustment
The provided center sleeve is 63 mm long and it is suitable for 86.5 mm BB
shells. If your bike has one of the bellow shorter BB shells, the center sleeve
should be cut to the indicated length. Please use a carbon cutting saw and
protective gear.
Center
sleeve Frame BB shell Cut to
63 mm
T47 (& mod
BB386)/86.5mm n/a
T47 (& mod
PF30)/73mm 50 mm
T47 (&mod
PF30)/6 8mm 45 mm
T47 (& mod
OSBB)/61mm 38 mm
Frame
Dowm Tube
Chainline Adjusters
(as needed)
Drive
Side
Center Sleeve
Bearing Shields
(both sides)
Non-Drive Side cup
Clockwise
15 N·m
Drive Side cup
Counter-Clockwise
15 N·m
Important note: To avoid any damage to the product, do not install any chainline adjuster or any other kind of spacer or external element between the BB cup and the bicycle frame.