Rigid Industries 46572 User manual

yamaha
®
yxz
®
2016-2017 yamaha
®
yxz
®
kit includes
Dome Light Mount
Installation Instructions
Fits (1) A-Series®
(2) M6 SS Nyloc Nuts(1) Mount #46572 (2) M6 x 14mm long SS Pan Head Bolts
*Lights Sold Separately
Thank you for purchasing Rigid Industries® products for your Yamaha®. Installation is fairly simple
with the right tools and good mechanical abilities. If you are not condent in your mechanical skills,
please seek the help of a professional to perform the installation. Please read through all of these
instructions and tips before proceeding with the installation. It is strongly recommended that this
product be installed by a professional.
Important
step 1 step 2
Install Rigid Industries A-Series light
to mount using (2) M6x14mm long SS
pan head bolts and (2) M6 SS Nyloc
nuts. See Figure 1.
Remove (2) factory bolts under the roof
on the T-Bar and re-install bolts through
Rigid Industries dome light mount.
See Figure 2.
Figure 2
Figure 1

Follow us on facebook at
Facebook.com/RigidIndustries
779 N Colorado St, Gilbert, AZ 85233 • 855-760-5337 • www.rigidindustries.com
For warranty information, visit www.rigidindustries.com/about/warranty
WARRANTY INFORMATION
Your installation is now complete.
Welcome to the Rigid Nation!
PKG-IS-204-A
Rigid Industries, Rigid and A-Series are registered and/or common law marks owned by
JST Performance, LLC, a Delaware limited liability company d/b/a Rigid Industries.
Always disconnect any power sources connected to your
vehicle before servicing fuses or electrical systems.
Wire your lights according to the instructions included with the light. Take
care to avoid any heat sources and sharp or abrasive surfaces.