RIOTEC OM7220J User manual

1
Programming Quick Guide
- OM7220J
Installation
Make sure that the scanner has the correct cable to plug in the PC
as below described::
*Note : Please install PL-2303 driver for USB serial
Reset Configuration to Default :
(For USB HID, RS232, USB Serial)
If you are unsure of the scanner configuration or have scanned
the incorrect codes, please scan the following barcode. This will
reset the scanner to its factory defaults.
Default
Keyboard Language (For USB HID Only)
Scan the barcode corresponding to the keyboard type
USA
(Original setting)
France
Italy Spanish
Portu
g
uese (Brazil) Portu
g
uese (Portu
g
al)
1D Symbologies – 1
ENABLE
CODABAR
DISABLE
ENABLE CODE 39 DISABLE
ENABLE Interleaved 25 DISABLE
ENABLE Industrial 25 DISABLE
1D Symbologies – 2
ENABLE
Matrix 25
DISABLE
ENABLE CODE 93
DISABLE
ENABLE CODE 128 DISABLE
ENABLE GS1-128
DISABLE
ENABLE UPC-A DISABLE
ENABLE UPC-E DISABLE
ENABLE EAN 8 DISABLE
ENABLE
EAN 13
DISABLE
ENABLE ISBN DISABLE


2
1D Symbologies – 3
ENABLE
ISSN
DISABLE
ENABLE
GS1 DataBar
DISABLE
ENABLE
GS1 Databar
Limited DISABLE
ENABLE
GS1 Databar
Expanded DISABLE
2D Symbologies
ENABLE
PDF 417
DISABLE
ENABLE
QR Code
DISABLE
ENABLE
Micro QR Code
DISABLE
ENABLE
Data Matrix
DISABLE
ENABLE
Aztec Code
DISABLE
 Information in this document is subject to change without notice.
 For more information, please visit:
www.riotec.com.tw
R_181023_01