Risco iWave RWX95 User manual

x 2 x 3 < 36kg (80lb) x 2
T
1
4 5
6
-10°C > 55°C
(14°F > 131°F)
IT
ES
FR
PR
EN
NL
PIR 868/433MHz
Model:RWX95
Registering the Detector into the system
The iWave must identify itself to the system receiver. This can be done by typing the 11
digit serial number of the detector into the system or using RF mode. To register the
detectors using the serial number refer to the system installation manual.
Enrolling using RF communication
1.Set the receiver to Learn mode.
2.Insert the batteries and press the tamper switch for at least 3 seconds. The iWAVE will
send a WRITE message. A successful learning will be indicated by:
(A) The system will sound a confirmation message and indicate the detector allocation in
the system.
(B) The iWAVE will blink.
Registrare il rilevatore nel sistema
iWave deve essere identificato dal ricevitore del sistema. Per farlo, inserire il numero di serie a 11 cifre del rilevatore
nel sistema o utilizzare la modalità RF. Per registrare il rilevatore utilizzando il numero di serie, fare riferimento al
manuale di installazione.
Acquisizione tramite comunicazione RF
1. Impostare il ricevitore in modalità di apprendimento.
2. Inserire le batterie e premere l’interruttore tamper per almeno 3 secondi. iWAVE invierà un messaggio WRITE se
l’apprendimento è riuscito:
(A) Il sistema emetterà un segnale acustico con messaggio di conferma indicando l’allocazione del rilevatore nel
sistema.
(B) iWAVE lampeggia.
Registro del detector en el sistema
El iWave debe identificarse en el receptor del sistema. Esto puede hacerse escribiendo en el sistema el número de
serie de 11 dígitos del detector, o bien usando el modo RF (Radio Frecuencia). Para registrar el detector usando el
número de serie, consulte el manual de instalación.
Alta del detector usando la comunicación RF
1. Ponga al receptor en modo Aprendizaje.
2. Inserte las pilas y pulse el interruptor del tamper durante al menos 3 segundos. El iWAVE enviará un mensaje de
Escritura. Si se ha dado de alta correctamente:
(A) El sistema emitirá un mensaje de confirmación e indicará la asignación de detector en el sistema.
(B) El iWAVE parpadeará.
Enregistrement du détecteur dans le système
Le modèle iWave doit être identifié par le système récepteur. Ceci peut être fait en entrant les 11 chiffres du numéro
de série du détecteur dans le système ou en employant le mode RF. Pour enregistrer le détecteur en utilisant le
numéro de série, consultez le manuel d'installation.
Utilisation de la communication RF pour l'inscription
1.Réglez le récepteur en mode d'apprentissage.
2.Insérez les batteries et appuyez sur le commutateur du dispositif anti-sabotage durant au moins 3 secondes. Le
iWAVE enverra un message ECRIT. Le succès de l'apprentissage sera indiqué par :
(A) Le système fera retentir un message de confirmation et indiquera l'inscription du détecteur dans le système.
(B) Le iWAVE clignotera.
Registrando o detector no sistema
O iWave deve identificar-se ao receptor do sistema. Isto pode ser executado ao digitar o número de série de 11
dígitos do detector no sistema ou utilizando o modo de rádio freqüência. Para registrar o detector utilizando o
número de série, consulte o manual de instalação do sistema.
Inscrição através de comunicação de rádio freqüência
1.Configure o receptor para o modo "Learn".
2.Introduza as pilhas e pressione o interruptor do tamper por pelo menos 3 segundos. O iWAVE enviará uma
mensagem WRITE. Um aprendizado bem sucedido será indicado
por :
(A) O sistema enviará o som de uma mensagem de confirmação, e indicará a atribuição do detector no sistema.
(B) O iWAVE irá piscar.
De detector in het systeem registreren
De iWave moet zichzelf bij de systeemontvanger identificeren. Dit kan worden gedaan door het digitale serienummer
11 van de detector in het systeem of met RF-modus te typen. Om de detectors met het serienummer te registreren,
moet u de installatiehandleiding van het systeem raadplegen.
Met RF-communicatie registreren:
1.Stel de ontvanger in op de modus Leren
2.Plaats de accu’s en druk op gedurende minstens 3 seconden op de sabotageschakelaar. De iWAVE verzendt een
bericht SCHRIJVEN. Een succesvol leerproces wordt door het volgende aangegeven:
(A) Het systeem laat een bevestigingsbericht horen en geeft in het systeem de detectortoewijzing aan.
(B) De iWAVE knippert.
2
2.2m-
2.5m
(7'-8')
PIR & PIR Pet
Detectors
3b
3a
PIR Pet 868/433MHz
Model: RWX95P
CR 123, 3V Lithium
PIR/Pet: 10 A standby
868.65MHz / 433.92MHz
0-255 min.
T
= 3 Y Typical
56mm
(2.2")
132mm
(5.1")
67.5mm
(2.6")
-10°C > 55°C
(14°F > 131°F)
EN IT ES FR PR NL SE
Programmering av detektorn
Detektorn iWave måste identifiera sig för systemets mottagare innan den kan användas. Detta kan göras genom att
enhetens 11-siffriga serienummer skrivs in eller genom att läsa in enheten via radio. För att skriva in detektorns
serienummer, var vänlig se instruktioner i systemets Installationsmanual.
Lär in detektorn via radio
1.Ställ mottagaren (centralapparaten) i Inlärningsläge.
2.Sätt i detektorns batterier och håll sabotagekontakten intryckt i minst tre (3) sekunder. iWAVE kommer då att
sända ett SKRIV-meddelande. Lyckad inläsning bekräftas med:
(A) Ett talmeddelande som bekräftar att meddelandet tagits emot och som informerar att detektorn tilldelats till
systemet.
(B) Lysdioden i iWAVE kommer att blinka.
SE

© RISCO Group 02/2017 5IN2536 B
10a
ft.
1 2 3 4 5 6 7 8 9 101112131415
1
2
0
3
01052015 3025 4035 5045
0
10
5
PIR - SIDE VIEW
m
m
ft
ft
m
ft
0
1052015 3025 4035 5045
123456789101112131415
0
0
10
5
20
15
30
25
1
2
3
4
5
6
7
8
9
0
10
5
20
15
30
25
1
2
3
4
5
6
7
8
9
PIR - TOP VIEW
m
79
ft m PIR Pet - TOP VIEW
0
10
5
20
15
25
1
2
3
4
5
6
7
8
0
10
5
20
15
30
25
1
2
3
4
5
6
7
8
9
01052015 3025 4035
1 2 3 4 5 6 7 8 9 10 11 120
10b
ft m
ft
m
1 2 3 4 5 6 7 8 9 10 11 12
1
2
0
3
01052015 3025 4035
0
10
5
PIR Pet - SIDE VIEW
Normal
2.5 min.
0-20Min
5
BC
8
A
IT Parametri impostati dalla centrale:
Para más información, consulte el manual de
instalación.
ES Parámetros configurados:
Sensibilidad
Funcionamiento
Parámetros Opción
Baja* / Alta
Normal (2,5 min)* / Test de Paseo (0)
Supervisión
LED
0-255 min (15 min*)
Apagado / Encendido*
Sensitivity
Operation
Supervision
LED
Parameters
For more information refer to the Installer Guide.
EN Parameters set by the system:
Option
Low* / High
Normal (2.5 min)* / Walk Test (0)
0-255 min (15 min*)
Off / On*
*
PR
0-255 min (15 min*)
Desativado / Ativado*
Opção
Baixa* / Alta
Supervisão
LED
Sensibilidade
Parâmetros
Parâmetros do seteo:
Para mais informações, consulte o guia de
instalação do sistema.
*
NL
Normaal (2.5 min)* / Looptest (0)
0-255 min (15 min*)
Uit / Aan*
Optie
Hoog / Laag*
Bedrijfsmodus
Controletijd
LED
Gevoeligheid
Geprogrammeerde
Geprogrammeerde parameters:
Raadpleeg de systeeminstallatiehandleiding voor meer
informatie.
Paramètres configurés:
FR
Sensibilité
Operation
Paramètres
Surveillance
LED
Pour plus d'informations, consultez le manuel
d'installation.
Supervisione
LED
Per maggiori informazioni vedere la guida di
installazione.
Parametri
Normal (2.5 min)*/Teste de Caminhada (0)Operação
Sensibilita’
Modo operativo
Bassa* / Alta
Normale (2.5 min)* / Test Sensore (0)
0-255 min (15 min*)
Off / On*
Opzione
Option
Faible/Elevé
Normal (2.5 min)* / Test de marche (0)
0-255 min (15 min*)
Off / On*
Israel
Tel: [phone]
[e-mail]
United Kingdom
Tel: [phone]
[e-mail]
Italy
Tel: [phone]
[e-mail]
Spain
Tel: [phone]
[e-mail]
France
Tel: [phone]
[e-mail]
Belgium
Tel: [phone]
[e-mail]
USA
Tel: [phone]
[e-mail]
Poland
Tel: [phone]
[e-mail]
China
Tel: [phone]
[e-mail]
Contacting RISCO Group
RISCO Group is committed to customer service and product support. You can contact us through our website www.riscogroup.com or as follows:
SE Parametrar som fastställts av system:
För mer information hänvisas till Installationsmanual.
PIR-känslighet
Operation
Övervakningstid
Lysdiod
Parametrar Option
Hög / Låg*
Normal (2.5 min)* / Gångtest (0)
0 - 255 minuter (15 min*)
På* / Av
* = Factory Default
Standard Limited Product Warranty (“Limited Warranty”)
RISCO Ltd. (“RISCO") guarantee RISCO’s hardware products (“Products”) to be free from defects in materials
and workmanship when used and stored under normal conditions and in accordance with the instructions for
use supplied by RISCO, for a period of (i) 24 months from the date of delivery of the Product (the “Warranty
Period”). This Limited Warranty covers the Product only within the country where the Product was originally
purchased and only covers Products purchased as new.
Contact with customers only. This Limited Warranty is solely for the benefit of customers who purchased the
Products directly from RISCO or from an authorized distributor of RISCO. RISCO does not warrant the Product
to consumers and nothing in this Warranty obligates RISCO to accept Product returns directly from end users
who purchased the Products for their own use from RISCO’s customer or from any installer of RISCO, or
otherwise provide warranty or other services to any such end user directly. RISCO’s authorized distributor or
installer shall handle all interactions with its end users in connection with this Limited Warranty. RISCO’s
authorized distributor or installer shall make no warranties, representations, guarantees or statements to its end
users or other third parties that suggest that RISCO has any warranty or service obligation to, or any contractual
privy with, any recipient of a Product.
Remedies. In the event that a material defect in a Product is discovered and reported to RISCO during the
Warranty Period, RISCO shall accept return of the defective Product in accordance with the below RMA
procedure and, at its option, either (i) repair or have repaired the defective Product, or (ii) provide a replacement
product to the customer.
Return Material Authorization. In the event that you need to return your Product for repair or replacement,
RISCO will provide you with a Return Merchandise Authorization Number (RMA#) as well as return instructions.
Do not return your Product without prior approval from RISCO. Any Product returned without a valid, unique
RMA# will be refused and returned to the sender at the sender’s expense. The returned Product must be
accompanied with a detailed description of the defect discovered (“Defect Description”) and must otherwise
follow RISCO’s then-current RMA procedure published in RISCO’s website at www.riscogroup.com in
connection with any such return. If RISCO determines in its reasonable discretion that any Product returned by
customer conforms to the applicable warranty (“Non-Defective Product”), RISCO will notify the customer of
such determination and will return the applicable Product to customer at customer’s expense. In addition,
RISCO may propose and assess customer a charge for testing and examination of Non-Defective Product.
Entire Liability. The repair or replacement of Products in accordance with this Limited Warranty shall be
RISCO’s entire liability and customer’s sole and exclusive remedy in case a material defect in a Product is
discovered and reported as required herein. RISCO’s obligation and this Limited Warranty are contingent upon
the full payment by customer for such Product and upon a proven weekly testing and examination of the Product
functionality.
Limitations. This Limited Warranty is the only warranty made by RISCO with respect to the Products. The warranty is not
transferable to any third party. To the maximum extent permitted by applicable law, this Limited Warranty shall not apply and
will be void if: (i) the conditions set forth above are not met (including, but not limited to, full payment by customer for the
Product and a proven weekly testing and examination of the Product functionality); (ii) if the Products or any part or
component thereof: (a) have been subjected to improper operation or installation; (b) have been subject to neglect, abuse,
willful damage, abnormal working conditions, failure to follow RISCO’s instructions (whether oral or in writing); (c) have been
misused, altered, modified or repaired without RISCO’s written approval or combined with, or installed on products, or
equipment of the customer or of any third party; (d) have been damaged by any factor beyond RISCO’s reasonable control
such as, but not limited to, power failure, electric power surges, or unsuitable third party components and the interaction of
software therewith or (e) any failure or delay in the performance of the Product attributable to any means of communication
provided by any third party service provider, including, but not limited to, GSM interruptions, lack of or internet outage and/or
telephony failure. BATTERIES ARE EXPLICITLY EXCLUDED FROM THE WARRANTY AND RISCO SHALL NOT BE
HELD RESPONSIBLE OR LIABLE IN RELATION THERETO, AND THE ONLY WARRANTY APPLICABLE THERETO, IF
ANY, IS THE BATTERY MANUFACTURER'S WARRANTY. RISCO does not install or integrate the Product in the end
user’s security system and is therefore not responsible for and cannot guarantee the performance of the end user’s security
system which uses the Product or which the Product is a component of.
This Limited Warranty applies only to Products manufactured by or for RISCO. Further, this Limited Warranty does not apply
to any software (including operating system) added to or provided with the Products or any third-party software, even if
packaged or sold with the RISCO Product. Manufacturers, suppliers, or third parties other than RISCO may provide their
own warranties, but RISCO, to the extent permitted by law and except as otherwise specifically set forth herein, provides its
Products “AS IS”. Software and applications distributed or made available by RISCO in conjunction with the Product (with or
without the RISCO brand), including, but not limited to system software, as well as P2P services or any other service made
available by RISCO in relation to the Product, are not covered under this Limited Warranty. Refer to the Terms of Service at:
https://riscocloud.com/ELAS/WebUI/UserLogin/License for details of your rights and obligations with respect to the use of
such applications, software or any service. RISCO does not represent that the Product may not be compromised or
circumvented; that the Product will prevent any personal injury or property loss by burglary, robbery, fire or otherwise, or that
the Product will in all cases provide adequate warning or protection. A properly installed and maintained alarm may only
reduce the risk of a burglary, robbery or fire without warning, but it is not insurance or a guarantee that such will not occur or
will not cause or lead to personal injury or property loss. CONSEQUENTLY, RISCO SHALL HAVE NO LIABILITY FOR ANY
PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM
THAT THE PRODUCT FAILED TO GIVE WARNING.
EXCEPT FOR THE WARRANTIES SET FORTH HEREIN, RISCO AND ITS LICENSORS HEREBY DISCLAIM ALL
EXPRESS, IMPLIED OR STATUTORY, REPRESENTATIONS, WARRANTIES, GUARANTEES, AND CONDITIONS WITH
REGARD TO THE PRODUCTS, INCLUDING BUT NOT LIMITED TO ANY REPRESENTATIONS, WARRANTIES,
GUARANTEES, AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS, TO THE EXTENT PERMITTED BY LAW. WITHOUT LIMITING
THE GENERALITY OF THE FOREGOING, RISCO AND ITS LICENSORS DO NOT REPRESENT OR WARRANT THAT: (I)
THE OPERATION OR USE OF THE PRODUCT WILL BE TIMELY, SECURE, UNINTERRUPTED OR ERROR-FREE; (ii)
THAT ANY FILES, CONTENT OR INFORMATION OF ANY KIND THAT MAY BE ACCESSED THROUGH THE PRODUCT
SHALL REMAIN SECURED OR NON DAMAGED. CUSTOMER ACKNOWLEDGES THAT NEITHER RISCO NOR ITS
LICENSORS CONTROL THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE
INTERNET, GSM OR OTHER MEANS OF COMMUNICATIONS AND THAT RISCO’S PRODUCTS, MAY BE SUBJECT TO
LIMITATIONS, DELAYS, AND OTHER PROBLEMS INHERENT IN THE USE OF SUCH MEANS OF COMMUNICATIONS.
RISCO IS NOT RESPONSIBLE FOR ANY DELAYS, DELIVERY FAILURES, OR OTHER DAMAGE RESULTING FROM
SUCH PROBLEMS. RISCO WARRANTS THAT ITS PRODUCTS DO NOT, TO THE BEST OF ITS KNOWLEDGE,
INFRINGE UPON ANY PATENT, COPYRIGHT, TRADEMARK, TRADE SECRET OR OTHER INTELLECTUAL PROPERTY
RIGHT IN ANY EVENT RISCO SHALL NOT BE LIABLE FOR ANY AMOUNTS REPRESENTING LOST REVENUES OR
PROFITS, PUNITIVE DAMAGES, OR FOR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, EVEN IF THEY WERE FORESEEABLE OR RISCO HAS BEEN INFORMED OF THEIR POTENTIAL.
RTTE Compliance Statement
Hereby, RISCO Group declares that this product is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.riscogroup.com