Risco WiComm Pro Instruction manual

Page 1
WiComm Pro Quick User Guide
This guide describes the main user operations of the various system accessories. For
detailed instructions, refer to the full user manual at our website: www.riscogroup.com
NOTES:
1. For additional information, refer to the instructions packaged with each device.
2. The SMS commands text is not case sensitive. A separator between command
words is not required although it is accepted.
“Away” (Full) Arming
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
Press
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code.
[Web application]: Click Full
Arm.
[Smartphone app]: Press .
[SMS]: Enter code + A
Example: 1234A
“Stay” or “Home” (Partial) Arming
 Quick mode: Press .
 High security mode: Press ,
then enter code or use proximity
tag.
Press
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code.
[Web application]: Click Part
Arm.
[Smartphone app]: Press .
[SMS]: Enter code + H
Example: 1234

Page 2
Partition Arming
 Quick mode: Press partition
number (1–3), then press Full
arming ( ) or Partial arming
().
 High security mode: Press
partition number (1–3), press Full
arming ( ) or Partial arming
(), then enter code or use
proximity tag.
 Quick mode: Press partition number
(1–3), then press Away arming
() or Stay arming ( ).
 High security mode: Press partition
number (1–3), press Away arming
() or Stay arming ( ), then
enter code.
[Smartphone app]: Partition arming
(Away and Stay) via Smartphone app.
[SMS]: Code +A or H + Partition No.
Quick Zone Bypass
Press and enter code > At
Activities menu press > at
Bypass Zone press > Scroll to
zone to bypass > For each zone define
Y/N using > Press to save
[Smartphone app]: Quick zone bypass
via Smartphone app.
[SMS]: Enter Code + B + Zone number
Full System Disarming
Press then enter code or use
proximity tag.
Press
 Quick mode: Press .
 High security mode: Press ,
then enter code.
Web Application]: Enter user
code, then click Disarm.
[Smartphone app]: Press .
[SMS]: Enter code + D
Partition Disarming
Press partition no. (1–3), press .
Enter code or use proximity tag.
Press (for all assigned
partitions)
 Quick mode: Press partition
number (1–3), then press .
 High security mode: Press
partition number (1–3), press ,
enter code
[Smartphone app]: Partition
disarming via Smartphone app.
[SMS]: Code + D + Partition
number

Page 3
View System Status
Press for 2 seconds and then
view status on the LCD display
[Smartphone app]: View system
status via Smartphone app.
[SMS]: Code + ST
View Last Alarm
Press for two seconds.
[Smartphone app]: View last
alarm from Event log via [SMS]:
Code + AL
Police (Panic) Alarm
Press and simultaneously
for 2 seconds
Press and
simultaneously.
Press small button (if installer
defined)
Fire Alarm Emergency/Medical Alarm
Press and simultaneously
for 2 seconds.
Press and simultaneously
for 2 seconds
System Chime On/Off Main Panel Speaker Volume
Press for 2 seconds
Press for 2 seconds. Select
volume level from 0—4 (no sound
to full volume), and then
press .

Page 4
Keypad Settings (Contrast, Brightness,
Buzzer Volume)
Changing Keypad Language
Press for 2 seconds.
Use the keys to choose
from menu,
press to select, then use
keys to adjust the keypad's
parameters and press
Press simultaneously for 2
seconds. Select the language and
press to confirm
Sound Indicators
Intrusion alarm: Continuous, rapid beeping.
Fire alarm: Staggered, rapid beeping.
Exit delay: Slow buzzer beeps until the Exit Delay time period expires.
Entry delay: Slow buzzer beeps until the Entry Delay time period expires.
Confirm operation: 1-second tone.
Reject operation: Three rapid error beeps.
Arm/Disarm chirp:
1 siren chirp = system armed
2 siren chirps = system is disarmed
4 siren chirps = system disarmed after an alarm

Page 5
Main Panel Indication LEDs
Power LED
Color State Status
Green ON Power OK
Red ON AC trouble
Orange ON Battery trouble.
Status LED
Red
ON System armed (Away or Stay)
Rapid flash Alarm
Slow flash System is in
entry/exit delay
Green ON System ready
Slow flash
System in Exit
delay with front
door open
Orange
ON System Trouble
Off System not ready
for arming
Communication LED
Green ON GSM/IP OK
Slow flash Cloud connected
Orange Slow flash GSM/IP Trouble
Orange Slow flash
Battery
Replacement
mode (service
mode)
All LEDs Green Sequence flash Wireless Learn
mode

Page 6
Wireless Panda Keypad LED Indicators
Cloud LED
On: System connected to cloud.
Slow Flash: Cloud connectivity
trouble.
Off: No cloud connectivity
Arm/Alarm LED
On: System armed (Away or
Stay).
Rapid Flash: Alarm.
Slow Flash: System in Exit /
Enty Delay.
Off: Disarmed
Ready LED
On: System ready.
Off: Open zones.
Slow Flash: Ready to arm
with open entry/exit zone.
Trouble LED
On: Trouble in the system.
Off: System is operating
normally.
Tamper LED
On: Tamper in the system.
Off: No tamper in the system.
Stay LED (Red)
On: System partially (Stay)
armed or bypass zones.
Off: No bypass zones.
Assign and Edit Users (User Codes) Assign Proximity Tag
1. Press and enter code.
2. Scroll to Codes/Tags, then press .
3. Scroll to User Codes, then press .
4. Scroll to New/Change, then press .
5. Scroll to select the index number (to designate
to a system user), then press .
6. Enter (or re-enter) the new code.
7. Re-enter the new code; the system beeps and
“Accepted” displays.
8. Repeat the above steps for additional codes.
1. Press and enter code.
2. Scroll to Codes/Tags, then press .
3. Scroll to Proximity Tags, then press .
4. Scroll to New/Change, then press .
5. Scroll to select the index number (to
designate to a proximity tag user), then
press .
6. Within 10 seconds, hold the proximity tag
at 1–2 cm from the keypad's top right
corner; a long beep indicates the tag has
been registered.
NOTE: If the tag was already registered, 3
beeps will sound, and a message will
display.

Page 7
Registering to the RISCO Cloud
1 . Go to www.riscocloud.com/register
2 . Fill in your first and last name.
3 . Enter your e-mail address as the Login Name (required for 1st-time activation).
4 . Define password (minimum of 6 characters and at least one digit), and then confirm.
5 . Enter the 15 digits Panel ID as it appears on the sticker located on the side of the panel (or as
printed on the package of the main panel).
6 . Complete registration form, and then press Register.
7 . Open the e-mail received at the email account you had defined as the Login Name in step 3,
and click the link to activate your registration to the Cloud.
Logging in to the RISCO Cloud / Accessing the Web User Application
1 . Go to www.riscocloud.com. Enter your User Login Name and password (as defined during
the registration process).
2 . Enter the passcode (user code), and click Enter.
iRISCO Smartphone App
Download the iRISCO Smartphone app from the Apple App store or the Android Play Store.

Page 8
02/2018 5IN2485