Riverside Myra 59453 User manual

#59453
Uph Arm Chair
Riverside
FURNITURE
Made in Viet Nam
Page 1 of 2
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach Chair Seat (B) to the Back Assembly (A) by using the 3" long Bolt (F) Spring Washer (G)
and Flat Washer (H) into the back corners of the Seat and 2" long Bolt (E) Spring Washer (G) and
Flat Washer (H) into the middle of the Seat, as shown in (Detail A) . Do not fully tighten Bolts
until after next step.
Myra
Dining Room
Assembly Instructions
Components and Hardware List

Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
3. Attach Front Legs (D) to the Chair Seat (B) by using the 2" long Bolts (E) Spring Washer (G) and Flat
Washer (H) as shown in (Detail B).
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (I).
5. Attach the Left and Right Arms (C) using the 1-3/4" long Bolts (J) Spring washer(K) and Flat washer(M)
to the Seat frame as shown in (Detail C). Attach to the Back Assembly (A) by using Screw (L) as shown
in (Detail D). Tighten all Bolts using the Allen Wrench.
Myra
Dining Room
Assembly Instructions