Roadragon G-M100 User manual

G-M100 User manual
0
User Manuel
G-M100

G-M100 User manual
1
Contents
目录
1 Introduction........................................................................................................................................................... 2
1.1 product description.....................................................................................................................................2
2 Product Overview..................................................................................................................................................2
2.1 Product accessories.................................................................................................................................... 2
2.2 Device LED light status............................................................................................................................. 2
2.2.1 RED LED (OBD Working status).................................................................................................. 2
2.2.2 Yellow LED (GSM signal status)...................................................................................................2
2.2.3 Blue LED (GPS signal status)........................................................................................................ 2
2.3 Parameters..................................................................................................................................................3
2.4 Function..................................................................................................................................................... 3
3 Installation instructions......................................................................................................................................... 4
3.1 Preparation before installation:.................................................................................................................. 4
3.2 Installation..................................................................................................................................................4
3.3 Tracking Platform...................................................................................................................................... 4
3.3.1 web platform...................................................................................................................................4
3.3.2 Phone APP...................................................................................................................................... 4
3.3.3 SMS commands and instructions................................................................................................... 4
4 Trouble shooting....................................................................................................................................................5

G-M100 User manual
2
1 Introduction
1.1 product description
The G-M100 is a 4g wireless communication technology and gps/bd system positioning technology,
which is a 4g intelligent information acquisition terminal built for the car network. with obd data
flow detection, fault code detection, frame number reading, fatigue driving setting, power off alar
m, overspeed alarm, water temperature threshold setting, idle alarm, wifi network hot spots and so
on. with a global positioning service platform to achieve real-time acquisition of vehicle data, tra
cking and positioning, and vehicle status monitoring.
2 Product Overview
2.1 Product accessories
Items
description
Main device
2.2 Device LED light status
2.2.1 RED LED (OBD Working status)
Light status
Meaning
light
OBD working
off
OBD Sleep/power off
2.2.2 Yellow LED (GSM signal status)
Light status
Meaning
Quick flash
GSM initialization
light
GPRS normal communication/online
off
GSM sleep/power off
2.2.3 Blue LED (GPS signal status)
Light status
Meaning
Quick flash
GPS signal searching
light
GPS location finished
off
GPS sleep/power off

G-M100 User manual
3
2.3 Parameters
Items
description
Size of the whole
machine size
59mm × 45mm × 22mm
Weight
54g
Operating Voltage
DC 9－35V
Backup battery
80mAh (3.7V polymer battery)
Working current
12V/73.6mA
Working
temperature
-20 C ~75 C
Storage temperature
-30 C ~80 C
Working humidity
10%-85% RH does not clot
QUECTEL EC20
module
(different modules
for different
countries, the
following are the
frequency bands for
EC20, different
countries with
different modules
and frequency)
4G:LTE FDD:B1/B3/B5/B8
LTE TDD：B34/B38/B39/B40/B41
3G :WCDMA:B1/B8
:TD-SCDMA:B34/B39
2G :CDMA:BC0 900/1800MHz
Hot Start
≤3sec(open sky)
Cold start
≤35sec(open sky)
GPS sensitivity
-162 dBm
Positioning accuracy
≤10 meters
2.4 Function
Location inquiry,
geo-fence,
over-speed alarm,
power-off alarm,
historical route playback,
Vehicle fault diagnosis,
OBD data detection.

G-M100 User manual
4
3 Installation instructions
3.1 Preparation before installation:
1. Open the box and check whether the device and the accessories are complete, otherwise please contact
your dealer.
2. SIM card selection, the device works with Micro SIM card, and support full Netcom band.
3. SIM card installation, SIM card corner inside, chip face to the side with shrapnel, which can help to hold
the card.
Note: (1) Before installing or removing the SIM card, please switch off the device;
(2) Should activate the GPRS function of the SIM card;
(3) Should activate the caller ID function; (activate or not according to the functions you chose.)
(4) If your SIM card required you to input the SIM PIN, please refer to your mobile phone user
manual to turn off the SIM PIN function.
(5) Please ensure that the SIM card is valid.
3.2 Installation
Device with standard OBDII socket
3.3 Tracking Platform
3.3.1 web platform
http://www.18gps.net/
3.3.2 Phone APP
If you already have login account information on the platform, you can login directly to the b
ackground server. Otherwise, please contact your dealer to open an online account for you. The lo
gin account and the login password are provided.
Enter the user login platform, fill in the login account and password, and submit it to the service
platform.
Operation instructions for service platform, please obtain "service platform operation guide" for your
dealer.

G-M100 User manual
5
3.3.3 SMS commands and instructions:
Send SMS command from user’s SIM card number to the SIM card number which inside
the GPS device.
The commands in the following SMS command list are in English input format, and the le
tters are case-sensitive according to the instruction requirements.
Common commands
SMS command format
Device reply
User parameter query
CXZT
Version、ID、IP, etc…
Revise IP
IP+blank+IP+blank+port
Example ：IP 106.3.230.234
8185
SET IP OK
Device restart
CQ
CQ OK
Restore factory settings
FORMAT
FORMAT OK
ACC off upload time interval
FREQ,123456,20
SET OK
ACC ignition upload time
interval
STATIC,123456,20
SET ACCONTIME OK
Revise APN
APN123456 CMMTM
SET APN OK
Revise APN user name
APNUSER123456 USER
SET APNUSER OK
Revise APN password
APNPASSWD123456
PASSWORD
SET APNPASS OK
4 Trouble shooting
If the device can’t be connected to the background server after first time installation, and the background
server shows it is offline, please check the installation correct or not.
If you have any questions for the operation, please refer to the following questions and solutions; if you
still can't solve the problem, please contact your dealer.
Common Problems
Reasons
Solutions
Poor signal
Test at areas where there are
high buildings or underground
parking lots, where radio
waves cannot be sent or
received normally.
Use it at a good signal place
platform shows device
not activated after first
installation
Main power supply connected
correct or not
Do not connect to the main control line
of the vehicle
SIM inserted not correct
Check the SIM card
LED status
Check if the indicator is blinking or
steady
SIM without GPRS activated
or SIM card out of charge.
Please contact carrier to activate GPRS
or charge

G-M100 User manual
6
Platform map shows
incorrect location
GPS no location
Please go to outdoor place where GPS
signal good
Vehicle did not move after
installation
Please drive the vehicle on the road
ACC connected or not
Connect the device and turn on ACC
Platform shows the main
power disconnect
Poor power supply connection
Check whether the power supply line of
the device connected correct or not
Platform shows device
offline
SIM card out of charge of
GPRS was canceled
Please check your SIM card
Weak signal area
Please try again at good signal area