Roadragon LLS-100TS Configuration guide

LLS-100TS User manual
0
User Manuel
LLS-100TS

LLS-100TS User manual
1
Contents
1 Introduction.................................................................................................................................................... 2
1.1 product description..............................................................................................................................2
2 Product Overview...........................................................................................................................................3
2.1 Product accessories............................................................................................................................. 3
2.2 Device LED light and push-button..................................................................................................... 4
2.3 Parameters...........................................................................................................................................5
3 Product Function............................................................................................................................................ 7
3.1 Function.............................................................................................................................................. 7
4 Equipment installation................................................................................................................................... 7
5 Precautions................................................................................................................................................... 11
6 Question....................................................................................................................................................... 11

LLS-100TS User manual
2
1 Introduction
1.1 product description
The LLS-100TS is a positioning terminal specially designed for Vehicle and Marine positioning mo
nitoring applications(Two different software). LLS-100TS can do the position monitoring and tracki
ng of outdoor valuable assets such as ships and Container through GPS/BD satellite positioning te
chnology, solar charging technology, GSM/GPRS communication technology, and Multi--Mode flexi
ble configuration of location service monitoring and management system. The device has a tamper
-evident alarm function, and the management center can monitor the device in real time. At the s
ame time, it also has a one-button alarm function. In case of emergency, it can send an alarm to
the management center through the button.
1.2 Technical Parameters
1. Platform: Low-power MCU+CDMA/GPRS module)+GPS/Beidou dual-mode positioning module+
G sensor
2. Band: GSM850/GSM900/DCS1800/PCS1900
3. Module of 4G Version（optional）(Quectel, EC20 R2.1 for samples)
LTE FDD:B1/ B3/ B5/ B8
LTE TDD :B38/ B39/ B40/ B41
WCDMA: B1/ B8
TD-SCDMA B34/ B39
3G: CDMA: BC0
GSM:900/1800MHz
4. Battery capacity: 10000mAh Lithium polymer battery
5. GNSS type: Beidou/GPS dual mode
6. A-GNSS Auxiliary: Support
7. GPS chip: MTK AG3331 （The whole: GT1612-AGBD）
8. Tracking sensitivity: -165dBm; Capture sensitivity: -156dBm; Acquisition:148dBm
9. CPU: STM32L151CCT6
10. Channel: 66 search channels and 22 simultaneous tracking channels
11. Acceleration Accuracy:0.1M/S^2
12. Acceleration sensor: KX022-1020，LGA-12，KIONIX
13. Dynamic Performance: Maximum altitude: 18,000m; Maximum velocity: 515m/s; Acceleration:
4G
14. Search time: Hot start 1S Cold start 40S (open conditions)
15. Positioning accuracy: less than 10 meters (open conditions)

LLS-100TS User manual
3
16. Solar panel specifications: Single crystal gauge, voltage 5.5V,
17. current 200mA, conversion rate 21.5%
18. Protection level: Waterproof IP67
19. Applicable environment: -20°C~75°C
20. Humidity: 30%----95%
21. Device Dimensions: 264mm*90mm*25mm
22. Bracket: 264mm*63.5mm*17mm
23. Device+ bracket：264mm*90mm*28.5mm
24. Weight: Device: 176 g; Accessories: 125 g. About 320 g in all.
25. Material of Shell: ABS+PC
2 Product Overview
2.1 Product accessories
Items
description
Main device
Sealing ring of SIM card
Cover of SIM card

LLS-100TS User manual
4
Waterproof sticker 1
Waterproof sticker 2
M3*11 screws
Bracket (with magnet）
2.2 Device LED light and push-button

LLS-100TS User manual
5
Status light ---- corresponding working status
Green light indicates GPS status:
1. No positioning: 4 seconds cycle, 2 seconds interval on and off;
2. Positioning: 4 seconds period, 0.5s on and 3.5s off
Red light indicates GSM status:
1. If the card is not found, the red light is always on;
2. If the card is found but GSM is not registered, it will turn on and off in 2 seconds;
3. Register for GSM, no GPRS, fast flash once in 4 seconds;
4.With GPRS, flash 2 times in 4 seconds
Note:
Press and hold the sos button for 3 seconds, the SOS alarm will be triggered, the buzzer will so
und and the white light flashes 3 times quickly
Inside:
2.3 Parameters
Items
description
Platform
Low-power MCU+CDMA/GPRS module)+GPS/Beidou dual-mode positioning
module+G sensor
GSM module
GSM850/GSM900/DCS1800/PCS1900 (Optional for 4G Version)
Dimensions
265mm*90mm*25mm (excluding the base)
Weight
409g

LLS-100TS User manual
6
Solar panel
specifications
Single crystal gauge, voltage 5.5V, current 200mA, conversion rate 21.5%
Battery capacity
10000mAh Lithium polymer battery
GNSS type
Beidou/GPS dual mode
A-GNSS Auxiliary
Support
Applicable
environment
-20 C ~75 C
Working humidity
30%-95% RH does not clot
Module of 4G
Version
（optional）
(Quectel, EC20 R2.1
for samples)
LTE FDD:B1/ B3/ B5/ B8
LTE TDD :B38/ B39/ B40/ B41
WCDMA: B1/ B8
TD-SCDMA B34/ B39
3G: CDMA: BC0
GSM:900/1800MHz
GPS chip
MTK AG3331 （The whole: GT1612-AGBD）
Tracking sensitivity
-165dBm
Capture sensitivity
-156dBm
Acquisition
148dBm
Positioning accuracy
<10 meters
CPU
STM32L151CCT6
Channel
66 search channels and 22 simultaneous tracking channels
Acceleration
Accuracy
11.0.1M/S^2
Acceleration sensor
KX022-1020，LGA-12，KIONIX
Dynamic
Performance
Maximum altitude: 18,000m;
Maximum velocity: 515m/s;
Acceleration: 4G
Search time
Hot start 1S Cold start 40S (open conditions)
Protection level
Waterproof IP67
Weight
Device: 180G; Accessories: 91G. About 270 G in all.
Material of Shell
ABS+PC

LLS-100TS User manual
7
3 Product Function
3.1 Function
1.Supervision of the daily position of small fishing vessels;
2.Navigation track management;
3.Supporting blind zone supplements;
4.Solar charging, no external power supply is required, the power can be inquired, and the low-power
active alarm;
5.Support tamper alarm;
6.Support one-button emergency alarm, except alarm, sound and light reminder;
7.The product meets the IP67 three-proof standard and is resistant to salt spray corrosion;
8.Having a solar charge status inquiry;
9.Flexible setting of the location upload interval, respectively, setting the parking and uploading data
upload interval;
(The original setting is to upload data every 30 minutes when the vessel is stopped. Upload data every 5
minutes when you ship)
10. has low power protection function;
4 Equipment installation
Step 1: Install SIM card
Open the SIM card slot, load the Micro card, close the card slot, and confirm that the SIM card is
clamped, pay attention to the direction of the card and the direction of the card slot, as shown below
As shown, open SIM
card holder

LLS-100TS User manual
8
Step 2: Turn on the switch
Set the switch next to the SIM card to the ON position and light up.
As shown, place the
SIM card
After the switch is
turned to the ON
position, the indicator
light on the front will
light up

LLS-100TS User manual
9
Step 3: Make sure the equipment is online
Query the device on the platform to report the current location information correctly, enter step 4
correctly, otherwise please confirm whether the SIM card is open GPRS and install correctly.
Step 4: Install SIM cap seal ring and SIM cap press plate
Place the square SIM cover seal ring in the fitting package in the rear cover slot of the main engine, then
press the SIM card pressure plate into the square SIM card waterproof ring and buckle into the rear cover
slot of the main engine, as shown below
Step 5: Stick waterproof back glue
Tear off the oil paper of the waterproof glue paste 1 in the fitting bag, then stick it on the back of the
mainframe, pay attention to the two round holes on the back glue to the two positioning points behind the
mainframe, as shown below

LLS-100TS User manual
10
Step 6: Fixed mounting bracket on site
Fix the mounting bracket (with strong magnetic force) at the installation site with at least 4 M5 stainless
steel tapping screws, as shown below
Step 7: Fix the host on the mounting bracket
Fix the main engine on the mounting bracket with 4 M3*11 stainless steel cross head screws, as shown
below, note:
(1) One side of the main engine with indicator lamp is close to the side of the support with magnet,
otherwise there is no disassembly alarm;
(2) The main solar panel is facing the sky, and there is no occlusion, otherwise it can not be charged;
Step 8: Stick waterproof glue 2
Stick 2 of the waterproof glue in the fitting, tear off the oil paper and stick it on both sides of the front of
the main engine, as shown below

LLS-100TS User manual
11
5 Precautions
1. During the installation process, please standardize the operation. After installation, please clean up the
site to keep it clean and tidy.
2. After testing the equipment in the office or warehouse, please be sure to turn the switch to OFF. When
testing in the office or warehouse, the equipment cannot be exposed to direct sunlight, cannot be charged,
and is always in a state of power consumption.
3. The waterproof adhesive must be attached.
6 Question
The device does not return
information
The installation position of the equipment is not suitable, and it may
be in a metal shielded area
The device is in a signal dead zone;
The SIM card has not been activated or is in arrears;
SIM card installation error, please open the lower cover to confirm;
The device has insufficient power;
Inaccurate return position
The installation location of the equipment is not suitable and cannot
face the sky;
The device is in an area without GPS signals;
Device does not charge
The device is in an area without GPS signals;
The installation position of the equipment is not suitable and cannot
be exposed to the sun;

LLS-100TS User manual
12
No disassembly alarm
Please confirm whether there is strong magnetic on the mounting
bracket;
Whether the side of the device indicator is close to the direction of
the magnet;