Robe Anolis UVinere Remote 1 User manual

Version 1.
3
QR code for user manual

UVinere Remote
2
Table of contents
1. Safety instructions ...................................................................................................................................................... 3
2. Fixture exterior view ................................................................................................................................................... 5
3. Installation .................................................................................................................................................................. 6
3.1 Mounting the fixture ............................................................................................................................................ 6
3.2 Connection to driver ............................................................................................................................................. 6
3.3 Wiring of the junction box .................................................................................................................................... 8
4. Software update ....................................................................................................................................................... 10
5. Technical specifications ............................................................................................................................................ 11
6. Cleaning and maintenance ....................................................................................................................................... 13
6.1 Disposing of the product .................................................................................................................................... 13
7. ChangeLog ................................................................................................................................................................ 13

UVinere Remote
3
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR UVinere Remote !
Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure
safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this
manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual
or any unauthorized modification to the device.
Unauthorized modification will void warranty.
1. Safety instructions
THIS LUMINAIRE IS DESIGNED WITH UV LEDS AND MUST BE INSTALLED IN COMPLIANCE WITH
COMPETENT TECHNICAL DIRECTIONS TO PREVENT THE USER’S EYE AND BARE SKIN FROM EXPOSURE
TO HARMFUL UV RADIATION.
CE LUMINAIRE EST CONCU POUR ETRE UTILISE AVEC DES LED UV ET DOIT ETRE INSTALLE EN STRICTE
CONFORMITE AVEC LES INSTRUCTIONS AFIN D’EVITER QUE LES YEUX OU LA PEAU L’UTILISATEUR NE
SOIENT EXPOSES AUX EFFETS NEFASTES DES RAYONS UV.
CAUTION:
Radiation exposure may cause blindness and cancer of skin!
Maximum exposure time (minutes)
Non optical version
24°
Distance from
UV source
UVinere 1 UVinere 2 UVinere 4 UVinere 1 UVinere 2 UVinere 4
0.8m (2.6ft) 21 - - - - -
0.9m (3.0ft) 26.6 - - - - -
1m (3.3ft) 32.9 - - - - -
1.5m (4.9ft) 74.0 37.0 18.5 - - -
2m (6.6ft) 131.5 65.7 32.9 24.5 - -
3m (9.8ft) 295.9 147.9 74.0 55.0 27.5 -
4m (13ft) 526.0 263.0 131.5 97.9 48.9 24.5
5m (16.4ft) 821.8 410.9 205.5 152.9 76.5 38.2
6m (19.7ft) 1183.4 591.7 295.9 220.2 110.1 55.0
7m (23ft) 1610.8 805.4 402.7 299.7 149.8 74.9
8m (26ft) 2103.9 1051.9 526.0 391.4 195.7 97.9
9m (29.5ft) 2662.7 1331.4 665.7 495.4 247.7 123.9
10m (32.8ft) 3287.3 1643.7 821.8 611.6 305.8 152.9

UVinere Remote
4
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
Always disconnect the fixture from power before cleaning, servicing or installing.
The fixture was designed for outdoor use. This fixture must not be used for underwater installation.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust. Do
not install the unit near an open flame.
Avoid using the unit in locations subject to possible impacts.
The fixture body never must be covered with cloth or other materials when the fixture is under operation.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or
maintenance.
Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons
not qualified to operate the fixture.
Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard
EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and
entertainment lighting control apparatus for professional use. Part 2: Immunity.
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given by
this standard (e.g. transmitters in surrounding area) before installing the equipment.
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia
equipment – Emission Requirements according to class B.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
Please use the original packaging if the fixture is to be transported.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit,
burns, electric shock etc.
Refer servicing to qualified service personnel.

UVinere Remote
5
2. Fixture exterior view
1. Transparent glass cover
2. Gore tex valve
3. Cable gland M20 (IN)
4. Housing
5. Mounting brackets
6. Cable gland M20 (OUT)
7. Junction box

UVinere Remote
6
3. Installation
3.1 Mounting the fixture
The UVinere Remote can be arranged in any orientation on a flat, non-flammable surface by means of two
mounting brackets (5) which can be tilted by 30°.
3.2 Connection to driver
The unit must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulations.
The UVinere Remote modules should be connected to the E-Box Remote or E-Box Remote basic as stated in the
chapter “Technical specifications“.
Example of connection

UVinere Remote
7
The table below states max. number of UVinere Remote modules connected to the E-box Remote/E-box Remote
Basic.
Max. number of
UVineres
Remote UV connected to the E
-
box
Remote/E-box Remote Basic
Cable length *
UVinere Remote
1
UVinere Remote
2
UVinere Remote
4
25 m
20
10
5
50 m
16
8
4
75 m
13
6
3
100 m
10
5
2
* Cable length is a total cable length between E-box Remote (E-box Remote Basic) and last connected UVinere
Remote.
Example: Total cable length=L1+L2+L3+L3
Max. number of UVinere Remote modules connected to the one output of the E-box Remote/E-box Remote Basic
is stated in the following table.
Max. number of
UVineres Remote
connected to the one output of the E
-
box Remote/E
-
box Remote Basic
UVinere Remote
1
UVinere Remote
2
UVinere Remote
4
16
8
4
Example: if you want to connect 10 UVineres Remote to the E-box Remote, you may connect 8 UVineres Remote 2
to the output 1 and 2 UVineres Remote UV 2 to the output 2 (at total cable length of 25 m).

UVinere Remote
8
3.3 Wiring of the junction box
1. Unscrew the four screws (9) on the cover (8) of the junction box (7), remove the cover (8) and the gasket (10).
2. Remove the end cap (11) from cable glands before passing cables throw cable glands M20 (3,6).
The cable glands M20x1.5 can be used for cables of a diameter of 7-13mm.
3. Pass the power/data cables through the cable glands (3,6) and connect them to the connection blocks (12, 13).
4. After checking all connections, fill the junction box with synthetic resin. Make sure that the End cap is inserted
in unused cable gland before filling it.
At filling of the junction box proceed according instructions stated on the bag of the resin.
The connection blocks have to be fully poured in the resin.
5. Place the gasket (10) on the junction box (7) and screw the cover (8) to the junction box (7).
Check that all cable glands (and blind flange) and screws are firmly tightened.
Wiring of connection blocks (12,13) in the junction box
CE version
Connector
Vcc
D+
D
-
0V
Function
LEDs +
Data +
Data
-
LEDs
-
Ground
Colour of wire
Red
Orange
White
Black
Not connected

UVinere Remote
9
US version
Connector
Vcc
D+
D
-
0V
Function
LEDs +
Data +
Data
-
LEDs
-
Ground
Colour of wire
Red
Orange
White
Black
Green
NOTE: Each line of UVineres Remote connected to the LED output of the E-box Remote/E-box Remote Basic has to
be terminated at the last fixture.
EITHER connect a 120 Ohm resistor between terminals D+ and D- in the last fixture, OR terminate via RDM as
described in the user manual for the E-box Remote.
Ensure ONLY the last fixture in the line is terminated using ONE of the above methods!
To keep declared IP rating of the fixture, every cable gland has to be covered with the end cap (11) if the cable
gland is not used for cable passing.
We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable
gland before inserting it into the body of the gland and an adequate layer of the paste LOCTITE 577 on
the thread of the body of gland (if the cable gland was screwed out).

UVinere Remote
10
4. Software update
Software update of UVinere Remote has to be done by means of the software ROBE Uploader running on PC.
The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches
Emineres Remote UV to the update mode automatically.
Please see https://www.robe.cz/robe-uploader/ for more information about ROBE uploader and the E-box Remote
user manual (E-box Remote Basic user manual).

UVinere Remote
11
5. Technical specifications
Power supply
• Input voltage: 48 V
• Power consumption:
UVinere Remote 1: 20W
UVinere Remote 2: 40W
UVinere Remote 4: 80W
Optic
• Light source:
UVinere Remote 1: 8 x UV LEDs
UVinere Remote 2: 16 x UV LEDs
UVinere Remote 4: 32 x UV LEDs
• UV LEDs Wave Length: 365nm
• Beam Angle:
optical version: 24°
non-optical version: 92°
• LEDs lifetime: 10.000 hrs
Compatible drivers
• E-box Remote, E-box Remote Basic
Mounting method
• Via two L-shape brackets with adjustment range 30°
Housing
• Aluminium extruded body
• Tempered glass
Cooling system
• Convection
Total heat dissipation
• UVinere Remote 1: 51 BTU/h (calculated)
• UVinere Remote 2: 102 BTU/h (calculated)
• UVinere Remote 4: 205 BTU/h (calculated)
Weight
• UVinere Remote 1: 2 kg (4.41 lbs)
• UVinere Remote 2: 3.1 kg (6.83 lbs)
• UVinere Remote 4: 5.1 kg (11.24 lbs)

UVinere Remote
12
Dimensions (All dimensions in mm [inch])
Protection factor
• CE: IP 67
• US: Suitable for wet location
Impact rating
• CE: IK06
Operating ambient temperature range
• -20°C /+40°C (-4°F /+104°F)
Operating temperature
• +67°C @ Ambient +40°C (+153°F @ Ambient +104°F)
Connection
• 5-cored cable
Included items
• 1 x UVinere Remote
• 1 x User manual
Optional accessories
•Cable for Eminere Remote (P/N 13053336)
•Black Glass Adaptor UVinere Remote 2 RAL9011 (P/N 10980752)
•Black Glass Adaptor UVinere Remote 4 RAL9011 (P/N 10980702)

UVinere Remote
13
6. Cleaning and maintenance
DANGER !
Disconnect from the mains before starting any maintenance or cleaning work
Rinse off loose dirt with low pressure water spray. Wash the housing with a soft brush or sponge and a mild, non-
abrasive washing detergent. Rinse it.
Maintenance and service operations are only to be carried out by a qualified person.
Should you need any spare parts, please use ROBE OEM parts.
6.1 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.
7. ChangeLog
This section summarizes changes in the user manual.
Versi
on of
the manual
Date of issue
Description of changes
1.0
19/05/2022
QR code added
1.1
1
7
/08/2022
Termination of Emineres line added
, colors of wires changed
1.2
0
9
/
01
/202
3
Eminere Remote 1 added
1.3
18/01/2023
Device renamed to UVinere Remote
Specifications are subject to change without notice.
January 18, 2023
Copyright © 2020-2023 Robe Lighting - All rights reserved
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici

DMX protocol
Version: 3.1 (23 modes in total), software version 3.0 and higher
Mode 1: RGBW(A)-8bit, Mode 2: RGB 8-bit, Mode 3: full RGBW(A)
1
2
3
4
5
6
7-10
Mode 4: White-full control, Mode 5: Reduced RGBW(A)
4
3
12
3
6
8
Reserved Mode 6- Reduced RGBW(A)+white control
RGBW(A) / RGB modes
1 2 3 4 5 6
1 1 1 - 1 1
Red
0 - 255 Red LEDs saturation control (0-100%) proportional
- - 2 - - -
Red Fine
0 - 255 Red LEDs saturation control fine proportional
2 2 3 - 2 2
Green
0 - 255 Green LEDs saturation control (0-100%) proportional
- - 4 - - -
Green Fine
0 - 255 Green LEDs saturation control fine proportional
3 3 5 - 3 3
Blue
0 - 255 Blue LEDs saturation control (0-100%) proportional
- - 6 - - -
Blue Fine
0 - 255 Blue LEDs saturation control fine proportional
4 - 7 - 4 4
White (Amber)
0 - 255 White LEDs saturation control (0-100%) proportional
- - 8 - - -
White (Amber) Fine
0 - 255 White LEDs saturation control fine proportional
- - 9 1 - 5
Green correction
0 Uncorrected white step
1-127 Minus green --> uncorrected white proportional
128 Uncorrected white (128=default) step
129-255 Uncorrected white --> Plus green proportional
- - 10 2 - 6
Colour temperature correction (CTC)
0 No function (0 - default) step
1 - 10 Tungsten dimming 2700 K step
11 - 20 Tungsten dimming 3200 K step
21-255 Colour temperature changing from 1800 K --> 6500 K proportional
(21-1800K, 66-2700K, 91-3200K,141-4200K, 211-5600K, 255-
6500K)
- - 11 3 5 7
Dimmer
0 - 255 Light intensity coarse (0-100%) proportional
- - 12 - 6 8
Dimmer Fine
0 - 255 Light intensity fine proportional
Copyright © 2022-2023 Robe Lighting s.r.o. - All rights reserved
All Specifications subject to change without notice
DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;
Mode/channels
DMX Value Function Type of control
Mode/Channels in all
Eminere Inground 2/4; Eminere Remote 1/2/3/4;
UVinere 2/4; UVinere Remote 1/2/4
Page 1

DMX protocol
Version: 3.1 (23 modes in total)
Mode 11: TW – White selection + Dimmer, Mode 12: TW – WW + CW
11
12
13
14-16
Mode 13: PW - Dimmer
3
4
2
Reserved
Mode 13 is suitable for UVinere and UVinere Remote
TW and PW modes
11 12 13
1 - -
White colour selection
0 - 255 White from 2700 K - 6500 K proportional
- 1 -
Warm White
0 - 255 Warm White LEDs saturation control (0-100%) proportional
- 2 -
Cool White
0 - 255 Cool White LEDs saturation control (0-100%) proportional
2 3 1
Dimmer
0 - 255 Light intensity coarse (0 - 100%) proportional
3 4 2
Dimmer Fine
0 - 255 Light intensity fine proportional
Copyright © 2022-2023 Robe Lighting s.r.o. - All rights reserved
All Specifications subject to change without notice
DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;
Eminere Inground 2/4; Eminere Remote 1/2/3/4;
UVinere 2/4; UVinere Remote 1/2/4
Mode/channels DMX
Value Function Type of control
Mode/Channels in all
Page 2

DMX protocol
Version: 3.1 (23 modes in total)
Mode 16: RGBW(A) pixels, Mode 17 RGB pixels, Mode 18: TW pixels,
17
18
19
20
21-23
Mode 19- PW dimmer pixels
16
12
8
8
Reserved
Pixel modes
17 18 19 20
1 1 - -
Red 1 -Eminere 1/2/3/4
0 - 255 Red LEDs saturation control (0-100%) proportional
2 2 - -
Green 1-Eminere 1/2/3/4
0 - 255 Green LEDs saturation control (0-100%) proportional
3 3 - -
Blue 1-Eminere 1/2/3/4
0 - 255 Blue LEDs saturation control (0-100%) proportional
4 - - -
White (Amber) 1-Eminere 1/2/3/4
0 - 255 White LEDs saturation control (0-100%) proportional
5 4 - -
Red 2 -Eminere 2/3/4
0 - 255 Red LEDs saturation control (0-100%) proportional
6 5 - -
Green 2-Eminere 2/3/4
0 - 255 Green LEDs saturation control (0-100%) proportional
7 6 - -
Blue 2-Eminere 2/3/4
0 - 255 Red LEDs saturation control (0-100%) proportional
8 - - -
White (Amber) 2-Eminere 2/3/4
0 - 255 White LEDs saturation control (0-100%) proportional
9 7 - -
Red 3-Eminere 3/4
0 - 255 Red LEDs saturation control (0-100%) proportional
10 8 - -
Green 3-Eminere 3/4
0 - 255 Green LEDs saturation control (0-100%) proportional
11 9 - -
Blue 3-Eminere 3/4
0 - 255 Blue LEDs saturation control (0-100%) proportional
12 - - -
White (Amber) 3-Eminere 3/4
0 - 255 White LEDs saturation control (0-100%) proportional
13 10 - -
Red 4-Eminere 4
0 - 255 Red LEDs saturation control (0-100%) proportional
14 11 - -
Green 4-Eminere 4
0 - 255 Green LEDs saturation control (0-100%) proportional
15 12 - -
Blue 4-Eminere 4
0 - 255 Blue LEDs saturation control (0-100%) proportional
16 - - -
White (Amber) 4 -Eminere 4
0 - 255 White LEDs saturation control (0-100%) proportional
- - 1 -
Warm White 1 -Eminere 1/2/3/4
Warm White LEDs saturation control (0-100%) proportional
- - 2 -
Cool White 1-Eminere 1/2/3/4
0 - 255 Cool White LEDs saturation control (0-100%) proportional
- - 3 -
Warm White 2-Eminere 2/3/4
DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;
DMX
Value Function Type of control
Mode/channels
Mode/Channels in all
Eminere Inground 2/4; Eminere Remote 1/2/3/4;
Page 3

DMX protocol
17 18 19 20
DMX
Value Function Type of control
Mode/channels
0 - 255 Warm White LEDs saturation control (0-100%) proportional
- - 4 -
Cool White 2-Eminere 2/3/4
0 - 255 Cool White LEDs saturation control (0-100%) proportional
- - 5 -
Warm White 3-Eminere 3/4
0 - 255 Warm White LEDs saturation control (0-100%) proportional
- - 6 -
Cool White 3-Eminere 3/4
0 - 255 Cool White LEDs saturation control (0-100%) proportional
- - 7 -
Warm White 4 -Eminere 4
0 - 255 Warm White LEDs saturation control (0-100%) proportional
- - 8 -
Cool White 4 -Eminere 4
0 - 255 Cool White LEDs saturation control (0-100%) proportional
- - - 1
Dimmer 1
0 - 255 Light intensity coarse (0 - 100%) proportional
- - - 2
Dimmer Fine 1
0 - 255 Light intensity fine proportional
- - - 3
Dimmer 2
0 - 255 Light intensity coarse (0 - 100%) proportional
- - - 4
Dimmer Fine 2
0 - 255 Light intensity fine proportional
- - - 5
Dimmer 3
0 - 255 Light intensity coarse (0 - 100%) proportional
- - - 6
Dimmer Fine 3
0 - 255 Light intensity fine proportional
- - - 7
Dimmer 4
0 - 255 Light intensity coarse (0 - 100%) proportional
- - - 8
Dimmer Fine 4
0 - 255 Light intensity fine proportional
Copyright © 2022 Robe Lighting s.r.o. - All rights reserved
All Specifications subject to change without notice
Page 4