Roberts Revival UNO User manual

Please read this manual before use
DAB / DAB+ / FM RDS portable digital radio
Revival UNO

Controls ........................................................................... 2-3
Battery operation .................................................................3
Using the buttons.................................................................3
8VLQJWKHUDGLRIRUWKH¿UVWWLPH...........................................4
Operating your radio - DAB .................................................5
Selecting a station - DAB.....................................................6
Secondary services - DAB...................................................6
Finding new stations - DAB .................................................6
Manual tuning - DAB ...........................................................7
'\QDPLFUDQJHFRQWURO'$%..............................................7
Station order - DAB .............................................................8
Prune stations - DAB...........................................................8
Operating your radio - FM ...................................................9
Manual tuning - FM..............................................................9
FM Stereo / Mono................................................................9
Scan sensitivity setting - FM..............................................10
Favourite button.................................................................10
Display options - DAB / FM ...............................................11
Preset stations...................................................................12
6HWWLQJDODUPWLPHV...................................................... 13-14
&DQFHOOLQJDODUPV..............................................................15
Contents
Snooze function.................................................................15
'LVDEOHDODUPV...................................................................16
Sleep function....................................................................16
$XWRPDWLFDOO\XSGDWLQJWKHFORFN .......................................17
6HWWLQJWKHFORFNPDQXDOO\.................................................17
Software version................................................................18
'LVSOD\EDFNOLJKWGLPPHU...................................................18
Language function.............................................................19
Equaliser function (My EQ)................................................19
+HDGSKRQHVRFNHW.............................................................20
$X[LOLDU\LQSXWVRFNHW.........................................................20
/LQHRXWSXWVRFNHW .............................................................20
6\VWHPUHVHW......................................................................21
(OHFWURPDJQHWLFFRPSDWLELOLW\DGYLFH ...............................21
3URGXFWPDUNLQJV...............................................................21
Safety notices....................................................................22
6SHFL¿FDWLRQV ....................................................................22
Circuit features ..................................................................22
Guarantee.............................................................%DFNSDJH
1

2
Controls
1. Tuning / Select / Snooze control
2. Loudspeaker
3. LCD display
4. Low battery indicator
5. On/Off / Volume control
6. Headphone socket
7. Auxiliary input socket
(Top)
8. Favourite button
9. Mode / Alarm button
10. Menu button
11. Auto Tune button
12. Info / Dimmer button
13. Preset button
14. Telescopic aerial
5
6
3 1
7 8 9 10 11 12 13 14
4 2

3
Controls (underneath the radio)
Line OutDC
7.5V /0.8A
Battery operation
1. Remove the battery cover located underneath the unit by applying pressure to the catch in the direction shown by the arrow and then lifting up
the cover.
2. Insert four LR6 (AA size) batteries into the spaces in the compartment. Take care to ensure all batteries are inserted with the correct polarity as
shown inside the battery compartment. Replace the battery cover.
3. The low battery indicator lighting, reduced power, distortion and a ‘stuttering’ sound are all signs that the batteries may need replacing.
4. If the radio is not to be used for any extended period of time it is recommended that the batteries are removed from the radio.
:HZRXOGUHFRPPHQGIRUHFRQRP\WKDWWKHUDGLRLVXVHGYLDWKH$&DGDSWRUZKHQHYHUSRVVLEOHZLWKEDWWHU\RSHUDWLRQIRURFFDVLRQDOXVHRQO\
IMPORTANT: 7KHEDWWHULHVVKRXOGQRWEHH[SRVHGWRH[FHVVLYHKHDWVXFKDVVXQVKLQH¿UHRUWKHOLNH$IWHUXVHGLVSRVDEOHEDWWHULHVVKRXOGLI
possible be taken to a suitable recycling centre. On no account should batteries be disposed of by incineration.
Caution: Replace batteries only with the same or equivalent type. Danger of explosion if the batteries are incorrectly replaced.
15. DC Input socket
16. Line Output socket
17. Battery compartment
18. Micro USB socket
(inside battery compartment for service use only)
15 16 17
Using the buttons
Most operations on the radio are performed by a simple short press of a button.
A few operations require a longer press of a button. In this case the instructions will tell you to apply a long press, and the button should be held
down for 2 or 3 seconds, until the radio has responded. An example of this is applying a long press to the Preset button to set a preset see page 12.
When navigating the menus it is generally possible to go back by pressing the Menu button.
1

4
8VLQJWKHUDGLRIRUWKH¿UVWWLPH
1. Plug the mains adaptor into the DC input socket located underneath your
radio (marked 'DC') ensuring that the plug is pushed fully into the socket.
 3ODFH\RXUUDGLRRQDÀDWVXUIDFH
3. Carefully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
4. Plug the other end of the mains adaptor into a standard mains socket
outlet and switch on the wall socket. Whenever the adaptor is used the
batteries are automatically disconnected.
5. The display will show 'WELCOME' for a few seconds followed by the clock
with blank digits 'XULQJWKLVWLPHWKHUDGLRLVVFDQQLQJWR¿QGD
DAB radio signal. After a minute or two the current time will appear on the
display.
6. If no signal is found, will continue to be displayed. It may be necessary
to relocate your radio to a position giving better reception. You should then
FDUU\RXWDVFDQWR¿QGVWDWLRQVVHH)LQGLQJQHZVWDWLRQVRQSDJH
7KH$&DGDSWRUVKRXOGEHGLVFRQQHFWHGIURPWKHPDLQVVXSSO\DQGIURPWKH
radio when not in use.
IMPORTANT: The mains adaptor is used as the means of connecting the
product to the mains supply. The mains socket and any multi-way mains block
used for the product must remain accessible during normal use. In order to
disconnect the product from the mains, the mains adaptor should be removed
from the mains socket completely.
Use only the mains adaptor provided with the product, or a genuine replacement
provided by Roberts Radio. The use of alternative adaptors will invalidate the
guarantee.
Line OutDC
7.5V /0.8A

5
Operating your radio - DAB
1. Carefully extend the telescopic aerial fully.
2. Press the On/Off FRQWUROWRVZLWFKRQ\RXUUDGLR:KHQ¿UVWVZLWFKHGRQ
the radio will be in DAB mode. After each use the radio will remember
the mode used and then switch on in that mode the next time it is
used. If the radio has been used before, the last used station will be
selected.
 ,IWKLVLVWKH¿UVWWLPHWKHUDGLRKDVEHHQXVHGDVFDQRIWKH%DQG,,,
DAB channels will be carried out (depending on whether scanning was
already completed in standby mode). During the scanning process
the display will show the progress of the station search. The number
on the right of the display is the number of stations that have been
found.
 :KHQWKHVFDQLVFRPSOHWHGWKH¿UVWVWDWLRQLQQXPHULFDOSKDRUGHU
$=ZLOO EHVHOHFWHG7KH¿UVWVWDWLRQLQWKHOLVWRIVWDWLRQV
found during scanning will be played. The display will show the station
name.
5. If no signals are found then it may be necessary to relocate your radio
to a position giving better reception. You should then carry out a scan
WR¿QGQHZVWDWLRQVDVGHVFULEHGRQSDJH
• Your radio has an indicator on the display to indicate the strength
of the DAB radio signal being received.
Note:KHQ¿UVWVZLWFKHGRQWKHUDGLRZLOOVHWWKHYROXPHWRDPRGHUDWHO\
high level, in case the broadcast is very quiet. After you have set the
volume, the radio will remember the setting that you have applied for the
next time that it is used.
DAB
DAB

6
DAB
Finding new stations - DAB
As time passes new stations may become available or you may have
moved your radio to a different part of the country. In this case you may
need to cause your radio to scan for new stations.
1. Press On/Off to switch on the radio.
2. Press Mode until the 'DAB' mode is selected.
3. To scan, press Auto Tune.
4. Your radio will perform a scan of the Band III DAB channels. As new
radio stations are found the station counter on the right-hand side of
the display will increase and the radio stations will be added to the
list stored in the radio.
DAB
Selecting a station - DAB
1. Press On/Off to switch on the radio.
2. Press Mode until the 'DAB' mode is selected.
3. Rotate Tuning to step through the list of available stations.
4. Press Tuning to select and tune to the desired station.
5. Adjust the Volume.
Note: If after selecting a station the station does not connect it may be
necessary to relocate your radio to a position giving better reception.
Secondary services - DAB
Some radio stations may have one or more additional broadcasts associated
with them. If these are available, they will appear immediately after the
main station as you rotate the Tuning control clockwise. To tune to the
selected service, press Tuning.
DAB

7
Manual tuning - DAB
Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning of the aerial or the radio
WRRSWLPLVHUHFHSWLRQIRUDVSHFL¿FFKDQQHORUIUHTXHQF\
1. Press Mode until the 'DAB' mode is selected.
2. Press Menu. The display will show 'MANUAL'. Press Tuning.
3. Rotate Tuning to select the desired DAB channel. Press Tuning to
tune to the chosen frequency.
4. If a signal is present, this will be indicated on a signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception.
5. When a DAB signal is found, as shown by the signal indicator boxes,
any new radio stations found with this signal will be added to the list
stored in the radio.
6. Press Menu to exit.
'\QDPLF5DQJH&RQWURO'5&VHWWLQJV'$%
The DRC facillity can make quieter sounds easier to hear when your radio
is used in a noisy environment.
1. When in DAB mode, press Menu.
2. Rotate Tuning until 'DRC' is displayed. Press Tuning.
3. Rotate Tuning to select the required DRC setting.
DRC 0 - DRC is switched off, Broadcast DRC will be ignored. DRC
1/2 - DRC level is set to 1/2 that sent by broadcaster. DRC 1 - DRC is
set as sent by broadcaster.
4. Press Tuning WRFRQ¿UPWKHVHWWLQJNote: Not all DAB broadcasts use
the DRC function. If the broadcast does not provide DRC information,
then the DRC setting in the radio will have no effect.
DAB
DAB
DAB
DAB
DAB

8
DAB
DAB
Station order - DAB
Your radio has 3 station order settings from which you can choose.
The station order settings are, name, ensemble and active.
Note: The default station order on your radio is name.
1. When in DAB mode, press Menu.
2. Rotate Tuning until 'ORDER' is displayed. Press Tuning.
3. Rotate Tuning until the required station order setting is displayed.
4. Choose between name, active and ensemble.
1DPH - sorts the station list alpha-numerically 0...9 A...Z.
'Active' - shows only those stations for which a signal can be found.
(QVHPEOH - organises the station list by DAB multiplex.
The current setting is indicated by an asterisk.
5. Press Tuning WRFRQ¿UPWKHVHWWLQJ
Prune stations - DAB
If you move to a different part of the country, some of the stations which were listed may
no longer be available.Also, from time to time, some DAB services may stop broadcasting,
or may change location or frequency. Stations which cannot be found, or which have
not been received for a very long time are shown in the station list with a question mark.
The Prune stations function will delete the marked DAB stations from your station list.
1. When in DAB mode, press Menu.
2. Rotate Tuning until 'PRUNE' is displayed. Press Tuning.
3. Rotate Tuning until 'YES' is displayed. Press Tuning to cause the invalid station
names to be removed from the station list.
4. If you do not wish to prune stations choose 'NO' in step 3 above.
Note: If you have moved your radio to a different part of the country you should also carry
out a search for new stations (please see the section 'Finding new stations' on page 6).
DAB
DAB

9
Operating your radio - FM
1. Carefully extend the telescopic aerial fully.
2. Press On/Off to switch on the radio.
3. Press Mode until the 'FM' mode is selected.
4. Rotate Tuning clockwise and then press the Auto Tune button. Your
radio will scan in an upwards direction (low frequency to high frequency)
DQGVWRSDXWRPDWLFDOO\ZKHQLW¿QGVDVWDWLRQRIVXI¿FLHQWVWUHQJWK$IWHUD
few seconds the display will update. The display will show the frequency
of the signal found. If the signal is strong enough and there is RDS data
present then the radio will display the station name.
 7R¿QGRWKHUVWDWLRQVSUHVVWKHAuto Tune button as before. To scan
the FM band in a downwards direction (high frequency to low frequency)
rotate Tuning anti-clockwise and then press the Auto Tune button.
6. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end. Adjust the Volume.
7. To switch off your radio press On/Off.
FM
FM
Manual tuning - FM
1. Rotate Tuning to tune to a station.The frequency will change in steps of 50kHz.
2. Adjust the Volume.
FM Stereo/Mono (Headphones and Line Output socket only)
1. If an FM station being received is weak some hiss may be audible. To reduce this, press Tuning
until the display shows 'MONO'. Your radio will switch to mono mode.
2. To return to stereo mode press Tuning until the display shows 'STEREO'. Your radio will switch
to stereo mode.
Note: Stereo listening is only available when listening via headphones or when using the Line Out
VRFNHWFRQQHFWHGWRDQH[WHUQDODPSOL¿HU
FM
FM

10
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
WRDOVREHDEOHWR¿QGZHDNHUVLJQDOVSRVVLEO\IURPPRUHGLVWDQWUDGLR
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. When in FM mode, press Menu.
2. The display will show 'SCAN'. Press Tuning.
3. Rotate Tuning to choose either the 'LOCAL' or 'DISTANT' option.
7KH'LVWDQWRSWLRQZLOODOORZWKHUDGLRWR¿QGZHDNHUVLJQDOVZKHQ
scanning.
4. Press Tuning WRFRQ¿UP7KH/RFDORU'LVWDQWVHWWLQJLVVWRUHGLQWKH
radio and remains in force until changed or until a System Reset.
Note: The initial setting (out of the box, or after a System Reset)
causes the radio to ignore weaker (or more distant) signals.
Favourite button
<RXUUDGLRLV¿WWHGZLWKDEXWWRQZKLFKZKHQSUHVVHGZLOODXWRPDWLFDOO\
select the required waveband and tune to your favourite radio station.
With this button you can store one favourite station from either the DAB
or FM wavebands.
1. Select the desired waveband (DAB or FM) and tune to the required
station. Apply a long press on the Favourite button (for 5 seconds)
until the display shows 'SAVED'.
2. To recall your favourite station momentarily press the Favourite
button.
FM
FM
FM
FM
FM

11
Display options - DAB / FM
Your radio has a range of display options when in DAB and FM modes:-
1. Press Info to cycle through the various options. All displays except
the text display will revert to the clock display after about 10 seconds.
DAB display options
Your radio can display the following in DAB mode:-
Scrolling text, program type, station name, time, date, channel/ frequency,
bit rate, audio type and signal strength.
For the signal strength, the minimum signal marker ( ) shows the minimum
signal strength needed for good DAB reception. The signal indicator boxes
increase or decrease showing the changing signal strength as you adjust
the telescopic aerial or your radio position.
FM display options
In FM mode your radio can use the Radio Data System (RDS) to display the
radio station name and additional text when provided by the broadcaster
DQGZKHUHWKHUDGLRVLJQDOLVVXI¿FLHQWO\FOHDU
Your radio can display the following in FM mode:-
Station name, scrolling text, program type, frequency, audio mode, time
and date.
DAB
DAB
DAB
FM
Scrolling text (DAB and FM)
Signal strength (DAB only)
Frequency (DAB and FM)
Time (DAB and FM)

12
Preset stations - DAB and FM
To make it easier for you to tune your radio to the stations that you prefer,
you may store selected radio stations as presets. Your radio holds presets
separately for DAB and FM radio modes.
You may set as many or as few presets as you like in each mode.
You can easily switch between displaying all DAB stations (or all FM
frequencies) and displaying only those that you have set as presets.
Any station or frequency which has been marked as a preset can easily
have the mark cancelled should your preferences or needs change.
Presets are retained when your radio is switched off.
1. To setup your preset stations, tune into the required station.
2. Apply a long press on the Preset button so that the tick symbol
shows in the display. This indicates that the radio station is marked
as a preset. To cancel the preset mark, apply a long press on the
Preset button again.
3. Repeat steps 1 and 2 as needed for any other stations that you want
as presets.
4. To view only the preset stations for the currently selected waveband
when tuning, press and release the Preset button so that the heart
symbol shows in the display.
5. To listen to one of the preset radio stations, rotate the Tuning control
until the required radio station is displayed. The radio will automatically
tune to that station.
6. To cancel the preset stations view, press and release the Preset button
so that the heart symbol disappears from the display. Your radio will
then be able to access the full station list using the Tuning control.
DAB
DAB

13
1. To change the states of the alarms while the radio is in Standby, repeatedly
press the Mode/Alarm button. The display will cycle through No alarm,
Alarm 1 enabled, Alarm 2 enabled or Alarm 1 and 2 enabled.
2. To change the detailed alarm settings while the radio is in Standby,
apply a long press on the Mode/Alarm button. This will cause the
alarms menu to be displayed. Then skip to step 5 below.
3. Alternatively, to change the alarm settings while the radio is switched
on, press Menu.
4. Rotate Tuning until 'ALARM' is displayed. Press Tuning.
5. Rotate Tuning to display either 'ALARM 1' or 'ALARM 2'. Press Tuning
to enter the alarm setting menu.
6. Rotate Tuning to select 'ON' or 'OFF'. If OFF is selected any current
setting for that alarm will be cancelled.
7. With 'ON' selected press Tuning WRFDXVHWKHDODUPKRXUGLJLWVWRÀDVK
on the display.
8. Rotate Tuning to choose the desired alarm hour.
DAB
DAB
DAB
6HWWLQJDODUPWLPHV
Your radio has two alarms which can be set to wake you to DAB, FM radio or buzzer alarm. Each alarm can be set to sound once, daily, on weekdays
or at weekends. In the event of a power interruption your radio has a built in memory that will retain your alarm settings. Ensure that the time is set
correctly before setting the alarms. Alarms can be set while the radio is in Standby or switched on.
DAB
21
Note: Alarms cannot be used when the radio is powered from the batteries.
Note: If no buttons are pressed for 10 seconds, your radio will exit the alarm setup.

14
9. Press Tuning7KHDODUPPLQXWHGLJLWVZLOOÀDVKRQWKHGLVSOD\
10. Rotate Tuning to choose the desired alarm minute.
11. Press Tuning7KHDODUPGD\RSWLRQZLOOÀDVKRQWKHGLVSOD\
12. Rotate Tuning to choose the desired alarm day option:
Daily - Will sound everyday
Once - Will sound at one time only
Weekdays - Will sound only on weekdays
Weekends - Will sound only on weekends
13. Press Tuning7KHDODUPPRGHRSWLRQZLOOÀDVKRQWKHGLVSOD\
14. Rotate Tuning to choose the desired alarm mode (DAB, FM, BUZZER).
If setting the alarms to the radio option, the radio alarm will be set to
the last listened radio station.
15. Press Tuning. The volume setting will show on the display.
16. Rotate Tuning to choose the desired alarm volume. The radio uses
the saved volume settings for each alarm when it sounds.
17. Press TuningWRFRQ¿UPWKHDODUPVHWWLQJV'SAVED' will show on
the display before exiting the alarm setup.
Alarms are indicated in the display by the alarm 21 symbol and the
corresponding alarm number.
DAB
DAB
DAB
21
DAB

15
&DQFHOOLQJDODUPV
1. Whilst an alarm is sounding, press On/Off to cancel the alarm.
Snooze function
1. When the radio or buzzer alarm sounds, press Tuning/Select/Snooze control.
This will silence the alarm for the selected number of minutes. The snooze
duration can be adjusted between 5 and 20 minutes in 5 minute increments.
The default setting is 5 minutes.
When Snooze has been pressed during an alarm, the display will show the
Snooze symbol . This sequence can be repeated as needed. The snooze
function can also be activated using other buttons on the radio.
2. To cancel the Snooze function, press On/Off.
7RVHWWKHVQRR]HWLPH
The snooze duration can only be set while the radio is playing.
1. When your radio is playing, press Menu.
2. Rotate Tuning until 'SNOOZE' appears on the display.
3. Press Tuning.
4. Rotate Tuning to choose the desired snooze setting from between 5, 10, 15
and 20 minutes.
5. Press TuningWRFRQ¿UPWKHVHWWLQJ
1
:KHQWKHDODUPVRXQGV
7KHDODUPZLOOVRXQGDWWKHVHOHFWHGWLPHVIRUXSWRPLQXWHVXQOHVVFDQFHOOHG7KHPD[LPXPYROXPHXVHGIRUWKHDODUPZLOOEHVSHFL¿HGGXULQJ
the alarm setting procedure. When your radio is set to wake by the radio alarm, your radio will switch to the selected radio station. If the radio cannot
FRQQHFWWRWKHVSHFL¿HG'$%UDGLRVWDWLRQWKHEX]]HUZLOOEHXVHGLQVWHDG
Note: If the radio is switched on because of a radio alarm you can control basic functions such as the volume control.
When the alarm activates it will start softly and gradually increase in level.
7KHDODUPLFRQZLOOÀDVKRQWKHVFUHHQDQGWKHUDGLRZLOODXWRPDWLFDOO\VZLWFKEDFNWRVWDQGE\PRGHZKHQWKHPLQXWHVKDYHHODSVHG
DAB
DAB

16
Sleep function
Your radio can be set to turn off after a preset time has elapsed. The sleep
timer can be set to between 10 and 90 minutes.
1. Press On/Off to switch on the radio.
2. Press Menu.
3. Rotate Tuning until 'SLEEP' appears on the display. Press Tuning.
4. Rotate Tuning to select the desired sleep time. The sleep setting will
increase in 10 minute increments from 10 up to 90 minutes. A further
increment will cause the sleep timer to be set to OFF which will cancel
the sleep function.
5. Press Tuning. The sleep symbol will appear on the display. The
display will exit the sleep options. Your radio will switch off after the
preset sleep time has elapsed.
6. To view the remaining sleep time, follow steps 2 to 3 above. The
remaining sleep time will show on the display.
7. To cancel the sleep timer and switch off your radio before the chosen
sleep time has elapsed, press On/Off.To cancel the sleep timer without
switching off your radio, set the sleep timer to the OFF setting.
DAB
DAB
DAB
'LVDEOHDODUPV
1. To disable alarms while the radio is in Standby repeatedly press the
Mode/Alarm button to cycle through the alarm on-off options (see
page 13, step 1).
2. Alternatively, to disable an alarm enter the alarm setup menu (see page
13, step 2-4) and rotate Tuning until the desired alarm is displayed.
Press Tuning.
3. Select the 'OFF' option. The chosen alarm will now be disabled.
DAB
DAB

17
$XWRPDWLFDOO\XSGDWLQJWKHFORFN
Your radio will usually set the clock time using the DAB signal. Alternatively
you may set the clock manually.
1. Press On/Off to switch on the radio.
2. Press Menu.
3. Rotate and press the Tuning control to select 'TIME', 'AUTO' then
choose an update option from, DAB or NO (None).
4. Press Tuning WRFRQ¿UP\RXUFKRLFH
5. The radio will set its time according to the information received.
If a signal is not found you should then either position the radio or its aerial
so that a signal can be received, or revert to manual clock mode below.
DAB
DAB
DAB
DAB
6HWWLQJWKHFORFNPDQXDOO\
Normally your radio will set its clock automatically using the DAB radio
signal. If no DAB signal is available and you need to set the time manually,
please follow the procedure shown below.
1. Press On/Off to switch on the radio.
2. To set the clock, press Menu.
3. Rotate and press the Tuning control to select 'TIME', 'MANUAL', hour,
minute, day, month and year setting.
4. Press Tuning WRFRQ¿UPWKHWLPHVHWWLQJ
DAB
DAB

18
'LVSOD\EDFNOLJKWGLPPHU
The brightness of the display can be adjusted for when the radio is in standby.
If you use the unit in the bedroom, you may prefer a lower standby brightness
level than the standard setting. There are four standby brightness levels.
To change the current standby brightness setting please follow these steps.
1. Press On/Off to switch off the radio.
2. Press the Dimmer button to choose from the High, Medium, Low or almost
Off dimmer setting.
When the radio is in standby pressing any button (except the dimmer button)
or the rotary controls will cause the radio to switch to the 'High' brightness level
for a few seconds. This is so that if the standby brightness level is set to Low
or almost Off, it is still possible to see the time when needed.
When your radio is powered by the AC mains using the supplied mains adaptor
the display backlight will always be on whenever the radio is switched on.
When using the radio powered from the batteries, the display backlight will be
switched on for approximately 12 seconds when any button is pressed.
Software version
The software version display cannot be altered and is just for your reference.
1. Press On/Off to switch on the radio.
2. Press Menu.
3. Rotate Tuning until 'SW VERSION' appears on the display. Press Tuning
to display the software version.
4. Press Menu as needed to exit.
DAB
DAB
21

19
Equaliser function (My EQ)
The sound on your radio can be adjusted to suit your personal taste for
the material that you are listening to.
You may set the treble and bass levels to your own preferences using
the 'My EQ' menu.
1. Press On/Off to switch on the radio.
2. Press Menu.
3. Rotate Tuning until 'MY EQ' appears on the display.
4. Press Tuning. 'TREBLE' will show on the display.
5. Rotate Tuning until the desired level (between - 4 and + 4) is displayed.
6. Press Tuning. 'BASS' will show on the display.
7. Rotate Tuning until the desired level (between - 4 and + 4) is displayed.
8. Press Tuning WRFRQ¿UPWKHVHWWLQJ
9. Press Menu as needed to exit.
DAB
DAB
DAB
Language function
<RXUUDGLRVPHQXVFDQEHFRQ¿JXUHGWRDGLIIHUHQWODQJXDJH
1. Press On/Off to switch on the radio.
2. Press Menu.
3. Rotate and press the Tuning control to select 'LANGUAGE' and then
select your desired language.
4. The display will change to the chosen language.
5. Press Menu as needed to exit.
DAB
DAB