Roberts Stream 94L User manual

Please read this guide before use
Stream 94L
Smart Radio with Bluetooth, USB and Streaming Services
and remote control from iPhone and Android using UNDOK

1
Contents
Stream 94L Smart Radio features 2
Before you can use this product 3
About this instruction manual 4
Controls and connections 5
Remote control battery replacement 7
Navigation controls 8
Conguration 9
Plugging in and language selection 9
Clock and time settings 10
Connecting to your computer network 11
Manual network conguration 16
Conguration - Using the UNDOK app 17
Network remote control options 20
Internet Radio 21
Selecting a radio station by location 22
Selecting a radio station by Genre 22
Selecting a popular station 23
Selecting a podcast 23
Presetting stations Internet radio, DAB and FM 24
Display options - Radio / Bluetooth / USB 26
Using USB memory devices 27
Playlists 29
DAB Radio 32
Selecting a DAB radio station 32
Finding new DAB radio stations 33
Manual Tuning 33
Dynamic Range Control settings 34
FM Radio 35
Operating your radio in FM mode 35
Manual tuning 35
Stereo / Mono switching - FM 36
Bluetooth mode 37
Connecting Bluetooth devices 37
Playing audio les in Bluetooth mode 38
Connecting and reconnecting a Bluetooth device 38
Bluetooth information 40
Clock and Alarms 41
Automatically updating the clock 41
Setting the clock format 41
Manually setting the clock 42
Setting the alarm clock 43
Snooze timer 45
Disabling alarms 45
Sleep timer 46
Kitchen timer 46
Display and Audio 47
Equaliser function 47
Brightness control 48
Headphone socket 48
Line out socket (3.5mm Jack) 49
Auxiliary input socket 49
Inactive Standby feature 49
Information 50
Factory reset 50
Electro-magnetic compatibility advice 50
Product markings 50
Software update 51
Troubleshooting 53
Cautions 55
Specications 55
Software license information 56
Guarantee 57
DAB
60

2
Stream 94L Smart Radio features
The Roberts Stream 94LSmart Radio is a radio which provides the following
features in an attractive compact unit:-
● Listen to local, regional, national and international broadcasts using
FM, DAB and Internet radio
● Listen to over 1000 radio stations from around the country, and over
10,000 from around the world without using your PC.
● Listen to podcasts from a wide range of broadcasters.
● 60 radio station presets (40 Internet Radio/Podcast, 10 DAB and 10
FM).
● Playback of audio les from USB memory devices.
● MP3 format is supported.
● The Stream 94L connects to your home computer network, using
WiFi connection. Dual band WiFi allows compatibility with a wide
range of networks.
● WiFi Protected Setup (WPS) is supported for simpler setting up with
compatible wireless routers.
● All radio station presets, network conguration details and user
settings are retained in the event of a power failure.
● Your smart radio can play content from a range of streaming services.
● Supports remote control and plays music from Apple iPhone, iPad
and Android devices using the UNDOK app.
● Bluetooth streaming to play your music or video soundtracks from
your smartphone, tablet or similar device.
● Large clock display with time and date when in Standby.
● Two alarm timers with snooze feature to wake you to either a
buzzer or a radio alarm. Adjustable sleep timer, can be set to turn
the radio off after a delay of between 5 and 90 minutes.
● Menu display in a choice of languages - Danish, Dutch, English,
Finnish, French, German, Italian, Norwegian, Polish, Portuguese,
Spanish, Swedish, Turkish.
● Power saving Inactive Standby.
● Easy-to-read colour graphic display with an adjustable display
backlight.
● Auxiliary input for playing audio from MP3 players, iPods or other
audio equipment.
● Line output socket for connecting the audio signal to an external
amplier or recorder. Stereo headphone socket for private listening.
● High quality three way speaker system with bass woofer.
● Mains or battery powered using supplied mains adaptor or optional
rechargeable battery pack (not included).
DAB
60

3
Before you can use this product
Before you can use your radio, you must have the following:
● A broadband Internet connection (not required for DAB, FM or Music Player functions).
● A router (or equivalent wireless access point) providing a WiFi signal, connected to your broadband Internet
Service Provider. The broadband modem, router and wireless access point will often be a single combined
unit supplied by your Internet Service Provider or bought from a computer store.
● A Smart phone or tablet which uses either the Android operating system (version 4.0.3 or later) or Apple iOS
(version 9 or later).
● If your wireless network requires a security password to allow connection, then you either need to know the
WEP, WPA or WPA2 key used for encryption so that you can get the radio to communicate with the network,
or your router needs to offer WiFi Protected Setup (WPS).
The radio's WiFi system is compatible with 802.11b, g, n or a networks and can use 2.4 GHz or 5 GHz WiFi
frequency bands.
When connecting using WiFi, the radio will typically work within a 10-20 metre radius from your wireless access
point. The actual range achieved will depend upon the building type, other nearby wireless networks, and possible
interference sources. DAB and FM radio functions can operate wherever the radio is able to receive a suitable
broadcast signal.
IMPORTANT: Before you continue, make sure that your router (or access point) is powered up and working with
your broadband Internet service (use your computer, smart-phone or tablet to verify this). To get this part of the
system working you must refer to the instructions supplied with those items.
DAB
60

4
Introduction .
About this instruction manual
This instruction manual is split into sections for each of the operating modes of your Roberts
Stream 94L internet radio. Each section is clearly identied by the shaded heading in the top
right hand corner of each pair of pages.
Before using the Internet Radio, you will need to connect your radio to your computer network
using the WiFi connection. This is covered in the section titled Conguration. This section
also explains how to set the menu language option.
The Internet Radio section describes how to nd radio stations to listen to. These can be radio
stations that you already know and listen to conventionally, or new stations you may search for.
The section for the USB describes how you may play music les from USB.
The two sections for DAB and FM Radio describe how to use the radio to listen to conventional
radio broadcasts.
The Bluetooth section describes how to use your Stream 94L to play audio les or video
soundtracks directly from your smartphone, tablet or similar devices.
The section titled Clock and Alarms describes the different ways by which the clock in the
radio may be set, as well as explaining the use of the alarms, snooze and sleep timer features.
The Display and Audio section shows how to adjust the display, use the equaliser and
connect your radio to other audio equipment.
The Information section includes troubleshooting, specications and warranty information.
(page 41)
Clock and Alarms
(page 9)
Conguration
(page 21)
Internet Radio
(page 27)
USB
(page 32)
DAB & FM Radio
(page 37)
Bluetooth
(page 47)
Display & Audio
(page 50)
Information
DAB
60

5
1 2 3 4 5
Controls and connections
Front view
1. Back button
2. Menu button
3. Mode button
4. Preset / Repeat / Shufe button
5. Preset 5 / Play button
6. Preset 4 / Pause button
7. Preset 3 / Stop button
8. Preset 2 / Fast-forward button
9. Preset 1 / Rewind button
10. Info / Brightness button
11. Alarm button
12. On / Standby / Sleep button
13. Volume control
14. Remote control sensor
15. Display panel
16. Tuning / Select / Snooze control
17. Loudspeaker x 2
5
6789101112
13
1234
17 17
15 1614
DAB
60

6
123
45
Volume
Select/Snooze
DC 12V 2.5A
Stream 94L
DC In:
USB:
Roberts Radio Ltd, Stoney Lane,
Whiston, Prescot, L35 2XW, UK
Glen Dimplex Europe Ltd,
Airport Road, Cloghran,
Co. Dublin, K67 VE08,Ireland
Designed & Engineered in the UK, Made in China
12V 2.5A
5V 500mA
READ
SAFETY GUIDE
Controls and connections - cont.
Rear view
18. Headphone socket
19. Line output socket
20. Auxiliary input socket
21. USB playback socket
22. DC input socket
23. Subwoofer
24. Telescopic aerial (antenna cable socket behind)
20 19 18
24
23
1
2
3
4
5
8
7
9
12
Remote control
handset
1. On / Standby / Sleep button
2. Preset buttons 1-5 / Playback
control buttons
3. Mode button
4. Info / Brightness button
5. Volume Down button
6. Volume Up button
7. Select / Snooze button
8. Tuning / Menu Up button
9. Menu Back button
10.Tuning / Menu Down button
11.Alarm button
12.Preset / Repeat / Shufe button
13.Menu Forward button
14.Menu button
Introduction .
22 21
6
10
11
13
14
DAB
60

7
Remote control battery replacement
1. Use a tool such as a coin to remove the battery cover on the rear of your remote control. Rotate
the cover approximately 45 degrees in an anti-clockwise direction to align the dot on the cover
with the ' ' marking on the remote control. Gently tap the control to release the cover.
2. Insert 1 x CR2025 size battery into the compartment with the positive side (marked +) facing
towards the battery cover, as shown on the reverse side of the battery cover.
3. Close the battery cover by re-applying the cover to the control in the position marked " " and
then use a tool such as a coin to rotate the cover clockwise so that there is a slight click and the
dot on the cover is aligned with the " " marking on the remote control.
4. If the remote is not to be used for an extended period of time it is recommended that the battery
is removed.
IMPORTANT: The battery should not be exposed to excessive heat such as from direct sunshine, re
or the like. After use, disposable batteries should if possible be taken to a suitable recycling centre.
On no account should batteries be disposed of by incineration.
Do not leave batteries within reach of young children. They can be a choking hazard.
Coin slot
WARNING:
• Do not ingest the battery. Chemical Burn hazard.
• The remote control supplied with this product contains a coin/button cell battery. If the coin/button
cell battery is swallowed it can cause severe internal burns in just 2 hours and can be fatal.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from
children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
CAUTION
Replace battery only with the same or equivalent type. Danger of explosion if the battery is incorrectly
replaced.
DAB
60

8
Introduction .
Navigation controls
This page describes the basic means of controlling your Stream 94L radio. Instructions for each
operating mode are given in the later sections of this book.
1. Pressing the On/Standby button brings your radio out of Standby mode. Pressing On/
Standby while the radio is in use will cause it to return to the Standby mode with the clock
display.
2. Pressing the Mode button gives you access to each of the operating modes in turn.Alternatively
press the Mode button and then turn the Tuning/Select control clockwise or anti-clockwise
to highlight the desired menu item then press the control to select that item.
3. Pressing the Menu button will access the menu system.
4. Many operations require the user to make a selection from the menu. This is done using the
Tuning/Select control. Turn the control clockwise or anti-clockwise to highlight the desired
menu item then press the control to select that item.
If there are more than six items in a menu, then the display will automatically scroll up or
down so that the additional items become visible. If there are many items in a menu, then the
radio allows the menu to 'wrap around' in either direction. This can make it easier to reach
items at the end of a long menu, such as a list of countries or Internet radio stations.
5. If an error is made when navigating the menus, it is generally possible to go back to a higher
level menu by pressing the Back button.
6. The Info button allows the display of information relating to the radio station or music le
being played.
Note: In this booklet, press always means press and release. If it is required to give a long press
on a button this will be described as apply a long press and the button should be held down
for 2 to 3 seconds until the radio has responded. Although controls on the radio are shown, all
functions are also available using the remote control.
Last Listened
Station List
Recall Preset
Save Preset
Sleep
Alarms
Internet Radio
DAB
60

9
DC 12V 2.5A
Stream 94L
DC In:
USB:
Roberts Radio Ltd,Stoney Lane,
Whiston, Prescot, L35 2XW,UK
Glen Dimplex Europe Ltd,
Airport Road, Cloghran,
Co.Dublin, K67VE08,Ireland
Designed & Engineered in the UK, Made in China
12V 2.5A
5V 500mA
READ
SAFETY GUIDE
Conguration
Plugging in and language selection
Your radio may be congured using either the display and buttons on the radio, or by
using the UNDOK app.
1. Place your radio on a at surface and plug the cable from the mains adaptor into the
DC input socket located at the rear of your radio ensuring that the plug is pushed
fully into the socket.
2. Plug the mains adaptor into a wall socket and switch on the socket.
3. IMPORTANT: The mains adaptor is used as the means of connecting the radio to
the mains supply. The mains socket and any multi-way mains block used for the
radio must remain accessible during normal use. In order to disconnect the radio
from the mains, the mains adaptor should be removed from the mains socket outlet
completely.
4. When you apply power, the display on the radio will light up and show a start up
screen for a few seconds. If this is the rst time that you use your radio (or after a
Factory Reset) the display will show the language menu. By default your radio will
display all menus and messages in English.
Note: If you wish to use UNDOK to setup your radio, please see page 17.
5 If you would like to setup your radio using the radio's controls instead of the UNDOK
app follow the setup procedure and choose the desired language. Rotate the Tuning
control to highlight the desired language. Press the Tuning control to enter the
selection.
• Your radio will then display a privacy policy. Please read the privacy policy and then
press the Tuning control to accept the policy.
6. The radio will show a setup wizard. With 'YES' highlighted press the Tuning control
to select 'YES' and to begin setting up your radio.
Continue on the next page.
Setup Wizard
Start now?
English
Dansk
Nederlands
Français
Deutsch
Italiano
Language
*
DAB
60

10
Conguration.
Clock and time settings
The following instructions assume that you have just plugged in your radio
and you have just specied the language option for the menus (see page 9).
1. Rotate Tuning to highlight the desired clock format (either 12 or 24 hour)
then press the control to enter your selection.
2. Next, the way in which the radio updates its clock is set. A menu allowing
you to specify the auto-update option for the clock will be shown. The
'Update from Network' option will be best for most users.
3. Rotate Tuning to choose an auto-update option for the clock. This can be
updated from the Radio, from the Network, or not updated automatically.
The default is to auto-update from the network. If you choose another option
go to 'Connecting to your computer network' on page 11. Otherwise you
will rst need to select the correct time zone and daylight savings setting,
see the next steps. If you choose 'No update' you will need to set the clock
manually later, see page 42. Press the control to conrm your choice.
4. Rotate Tuning to highlight the time zone for your current location. Press
Tuning to enter the setting.
5. You will then need to set the Daylight Savings option according to your
location (Daylight Savings is also known as Summer/Winter time or BST/
GMT adjustment).
Rotate Tuning to highlight 'ON' or 'OFF' as required. The asterisk shows
the current setting.
In the UK, 'ON' is equivalent to British Summer Time and 'OFF' is equivalent
to Greenwich Mean Time.
6. Continue setting up your radio on the next page.
Date/Time
12/24 hour format
Auto Update
Update from DAB
Update from FM
Update from Network
No update *
UTC + 00:00: Dublin, Lond
UTC + 00:30:
UTC + 01:00: Madrid, Am
UTC + 01:30:
UTC + 02:00: Athens, Cair
UTC + 02:30:
Set Timezone
*
Daylight Savings
Daylight Savings
DAB
60

11
Connecting to your computer network
Before you can use your Stream 94L radio to listen to Internet radio, it must rst be connected to your computer
network.
This section of this book describes how to connect the radio to your network using the wireless (WiFi) connection.
The following instructions assume that you have just set up the clock and time options using the Setup Wizard
as described on the preceding page.
These instructions also apply to the Network Wizard in the Network Settings menu (from step 2 onwards).
1. After setting the Daylight Savings options (see page 10), the display will show the 'Keep network connected?'
option. You should choose 'Yes' if you wish to keep the radio connected to the network when it is in Standby
mode. This will allow remote control software to switch on your radio when needed.
If you choose 'No' then your radio will shut down its WiFi connection when it is in Standby, DAB, FM, Bluetooth
or Aux-in modes. This minimises power consumption but it does mean that you will need to switch the radio
on manually in order to use either Streaming Services or any remote control software such as the UNDOK
app.
Rotate Tuning to highlight the required option and then press the control to make the selection.
Your radio will then scan for available WiFi networks.
2. The radio will enter the Network Settings Wizard and will display 'Scanning...'. The radio will automatically
scan both 2.4GHz and 5GHz WiFi bands. After a short while the display will show a list of the available WiFi
networks. Setup using the WiFi connection, go to step 3 on the next page.
*
Network Settings
Keep network connected?
Network Settings
Network Wizard
Scanning...
DAB
60

12
Conguration.
Connecting to your computer network - cont.
3. To use a WiFi connection, you will rst need to identify your network in the list of
network names presented by the Network Wizard. If no networks are found then you
may have to get your wireless router working (please see the instructions supplied
with it) or you may be too far from the router.
When the radio nds your wireless network, it displays the Network Name (SSID)
for the wireless access point on the screen. This is a name that is allocated to the
access point in your router by the person who set up the network - for example: 'Jones
family' or 'Paul's network'. Routers supplied by Internet Service Providers often have
the default name of the WiFi network provided on a label or card for easy reference
(e.g. BTHub - 1234, virginmedia 1234567). If the router supports WiFi Protected
Setup, then '[WPS]' will be shown in front of the SSID.
It is possible, and in some locations highly likely, that your radio will nd more than
one wireless network, in which case you should choose which one you need to
connect to.
4. Rotate Tuning to see the SSID for each wireless network that has been found. If
your network is shown proceed to step 6 on the next page. If it is not shown then
proceed to step 5, also on the next page.
If you make a mistake at any point, use the Back button to go back to the previous
screen.
Jones family
[WPS] Paul’s network
Smith
Brown
[Rescan]
[Manual config]
SSID
Network Settings
Network Wizard
Scanning...
DAB
60

13
Connecting to your computer network - cont.
5. If your network is not found, it may be because the router is congured not to broadcast the SSID. You
should then use the Tuning control to highlight and select the '[Manual cong]' option in order to enter
the network details manually. This is described in 'Manual Network Conguration', see page 16.
If your network name is being broadcast, and it was not found, then try re-scanning (press the Back
button), and if necessary try moving your radio to a location closer to your access point / router.
6. When the SSID for the wireless network you wish to connect to is highlighted on the screen, press the
Tuning/Select control. If WiFi Protected Setup (WPS) was indicated, you will see an additional menu at
this point, otherwise proceed to step 7.
Choose one of the WPS menu options as required for your router (WPS may be via push button, or using
an identication number).
'Push Button' - the display prompts you to press the WPS button on your router and then the Tuning/Select
control on the radio. The two devices should then connect with the encryption key sent automatically to
the radio.
'PIN' - the display shows an identication number which you must enter into your router using a web
browser (refer to your router's user documentation). You should then press the Tuning/Select control on
the radio. The two devices should then connect with the encryption key sent automatically to the radio.
'Skip WPS' - if you wish to enter the encryption key yourself (or if it was previously entered).
If you chose Push Button or PIN the screen will then show 'Connecting...' and then 'Setup wizard completed'.
Press the Tuning control to exit the setup wizard and then go to paragraph 10 on the next page.
7. If your network is congured without an encryption key, the screen should say 'Connecting...', and then
'Setup wizard completed'. Press Tuning to exit the setup wizard and show the Main mode menu. If this
is the case then you have successfully connected your radio to your network, so please go to paragraph
10 on the next page.
8. If the screen displays 'Key:', it is because the network is using one of the encryption systems: Wired
Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to enter the correct WEP or
WPA key into the radio to allow it to communicate with your wireless network. If you do not have the WEP
or WPA key, then you should obtain it from the person who set up your network. Some wireless routers
may come with an encryption key already set up by the supplier, in which case you should refer to the
documentation provided with it. WPA is used here to also include WPA2.
Jones family
[WPS] Paul’s network
Smith
Brown
[Rescan]
[Manual config]
SSID
Jones family
[WPS] Paul’s network
Smith
Brown
[Rescan]
[Manual config]
Push Button
PIN
Skip WPS
WPS Menu
Network Settings
Please Wait
Connecting...
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
SSID
DAB
60

14
Conguration.
Connecting to your computer network - cont.
WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless routers
can also use pass-phrases for WEP but these are not supported by the radio. WPA
keys are usually set up using a pass-phrase of between 8 and 63 characters. Your
radio accepts pass-phrases for WPA keys.
9. To enter the WEP or WPA key, characters are selected and entered using the Tuning
control.As you rotate the control, the highlight scrolls through the available characters
as well as the three controls on the right. The character currently highlighted will be
entered when you press the Tuning control.
Do this as needed until the complete key has been entered. Remember, WEP keys
only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper and lower
case characters. You must enter the key exactly or the radio will not connect to the
network.
The three controls on the right-hand side of the screen have special functions. You
can quickly access these by pressing the Info button and then using the Tuning
control as needed:
select ' ' to erase a character just entered (long press to clear); Info
again to continue
select ' ' when the complete key has been entered
select ' ' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the
display will show 'Key: [Set]'. If you have previously entered a different key, you must
clear this by selecting the ' ' symbol. This will remove the '[Set]' indication.
After the nal character of the WEP or WPA key has been entered, highlight the
symbol and press the Tuning control.The screen will show 'Connecting...' and then
'Setup wizard completed'. Press the Tuning control to the exit setup wizard. The
radio should now be able to connect to the network.
10. Once you have connected your radio to the network (and therefore also to the Internet)
it will display the Main mode menu. Press the On/Standby button to put the radio
into Standby mode. It should then display the time as obtained from the Internet.
If the time display is not correct for any reason, it can easily be adjusted later, see
page 42, 'Manually setting the clock'.
Network Settings
Please wait
Connecting...
Setup Wizard
Setup Wizard
completed
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
123-jones
DAB
60

15
Connecting to your computer network - cont.
If you have followed the steps on the preceding pages successfully, your radio will have connected to your
router, and then made a connection to the Internet and set its clock. You can then listen to radio stations
via the internet and use the other features of your radio (see page 21 onwards).
Changing the network connection
In the sections above, you chose how your radio would be connected to your network, using a WiFi
connection. From time to time, you may nd that you need to connect to different computer networks. The
Network Settings menu allows you to change your radio’s network settings, scan for an alternative wireless
network, or to manually congure the network parameters.
The steps outlined below describe how you can do this - see also the section 'Network proles' on page 51.
If you have no need to do this, however, please skip to page 21.
ConguringtheradiotouseanalternativeWiFiconnection
1. From the Network Settings menu select 'Network wizard'. This will present you with details of any WiFi
networks that are found. Scroll down the list using the Tuning/Select control to the desired network
name. Press the control to select this network.
The radio will then use its WiFi system to communicate with the network. Depending on the settings for
the new network you may need to enter an encryption key (see pages 13-14). By default the radio will
then acquire an IP address and other network settings from the network's router using DHCP (Dynamic
Host Conguration Protocol).
Equaliser
Streaming Audio Quality
Network
Time/Date
Brightness
Inactive Standby
System Settings
Network Wizard
PBC Wlan Setup
View Settings
Manual Settings
NetRemote PIN Setup
Network Profile
Network Settings
Network Settings
Network Wizard
Scanning...
Last Listened
Station List
Recall Preset
Save Preset
Sleep
Alarms
Internet Radio
DAB
60

16
Conguration.
Manualnetworkconguration
If you do not wish to use DHCP for automatic network conguration, or if your network is congured with a
hidden SSID, then you will need to enter some network settings manually. The typical user will not need to
use manual network conguration. The facility is provided to allow the product to be used with networks where
the conguration of devices is not managed by the router, or where customised settings may be required. In
such cases it is assumed that the user already has sufcient knowledge to understand the terms and settings
used for this purpose. IPv4 address schemes are used.
1. From the radio's Network Settings menu, select 'Manual settings'. You must then choose to connect using
a'Wireless' connection. There are as many as nine settings screens, shown by the '1 of 9' progress marker
in the top right corner of the display.
2. The subsequent menus allow conguration of the following parameters:
DHCP - On or Off
IP address - e.g. 192.168.1.25
Subnet mask - e.g. 255.255.255.0
Gateway adress - e.g. 192.168.1.1
DNS address (primary and secondary addresses)
SSID - needed for WiFi connections if the SSID is not broadcast
WEP / WPA / WPA2 key and settings
When entering numbers, the SSID or the WiFi pass key, the three controls on the right-hand side of the
screen have special functions. You can quickly access these by pressing the Info button and then use the
Tuning control as needed:
select ' ' to erase a character just entered (long press to clear); Info again to continue
select ' ' when the complete encryption key has been entered
select ' ' to cancel and go back to the TKIP / AES options screen
3. Upon completion of the settings the radio should connect to the network. If the connection is made
successfully, the radio will return to the Network Settings menu. If the unit cannot connect, then it will display
a 'Failed to connect' message. You will then need to identify which setting may need to be changed, or
whether some other network issue is responsible. Once connected, the network settings are saved. They
are retained in memory while the radio is disconnected from the mains.
Connection Type
Wireless
IP settings
IP address
192 . 168 . 1 . 25
Subnet mask
255 . 255 . 255 . 0
SSID:
mynetwork
Network Settings
Please Wait
Connecting...
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
Network Wizard
PBC Wlan Setup
View Settings
Manual Settings
NetRemote PIN Setup
Network Profile
Network Settings
DAB
60

17
• iOS - Download from Apple App Store
• AndroidTM - Download from Google Play
• If you already have the UNDOK app installed on your device ensure that you have the latest version.
• It is possible that this app may have been changed slightly since these instructions were written.
• Please refer to the Roberts Radio website for guidance on how to use the latest version.
Note: At the time of writing Android version 4.0.3 and later or iOS version 9 or later are required to use UNDOK.
Conguration-UsingtheUNDOKapp
Download the UNDOK app
Download and install the UNDOK app on to your Android or iOS device.
DAB
60

18
Conguration.
Setup new audio system - Apple iOS device
If your device uses Android, please see page 19.
The UNDOK app has a setup wizard to help congure suitable audio devices to connect to your home WiFi network.
1. Open the UNDOK
app.
2. Setup a New Audio
system.
3. The app will prompt you
to use your device’s
WiFisettings to connect
to your radio.
4. Select your Stream
94L radio. Once your
device has connected
to the radio, return to
the UNDOK app.
5. Use the app to complete
the setup,including giving
the radio a name, how it
is connected via WiFi.
6. For a WiFi connection
the app will ask you to
choose a WiFi network
and enter the appropriate
password.
7. Your radio will connect to
your network.
DAB
60

19
Note:If when setting up your radio your Android device complains that it cannot
connect to the internet this is because it is temporarily connected directly to your
radio. You should ignore this warning message.
1. Open the UNDOK
app.
2. Setup a New Audio
system.
3. The app will show a
list of suggested audio
systems to setup.
Setup new audio system - Android device
If your device is an iPhone or iPad (i.e. uses iOS) please see page 18.
The UNDOK app has a setup wizard to help congure suitable audio devices to connect to your home WiFi network.
4. Your radio will normally
appear in this list as
Stream 94L. It may
appear in the list below
called Other. Select the
radio to be setup.
6. Choose to connect via
WiFi.
7. For a WiFi connection
the app will ask you to
choose a WiFi network
and enter the appropriate
password.
8. Your radio will connect to
your network.
5. Use the app to complete
the radio setup, including
giving the radio a name.
DAB
60