Robot Coupe R2Dice User manual

R2Dice Continuous
Feed Assembly
Instructions
Step 1: Place Feed
LeadBaseslightlyleft
ofcenterandturnright
Step 2: Place
Discharge Plate on
MotorShaft.
Step 4: Place Dicing
Gridwithtabfacing
rearofmachine.
Step 5: Slicing Disc is
installedoverDicing
Grid
Step 6: Tighten Screw
AssemblybyTurning
Clockwiseuntil snug but
notlocked.
Step 7: Place Top of Continuous
Feed (making sure the tabs are inside
thefeedleadbase) slightlyleftof
centerandturnrightlocking it in place.
Step 8:
Place Long
Pusherin
round slotof
Pusher
Assembly.
Slicing Disc
Dicing Grid
Motor Base
Feed Lead
Top
Feed Lead
Base
Long
Pusher
Pusher
Assembly
Discharge Plate
Motor
Shaft
Screw Assembly
Step 9:
PlacePusher
Assemblyinto
halfmoon slot
ofTophalfof
Feed Lead.
Step 10: Prop-
erlyAssembled
R2Dicewith
ContinuousFeed
Attachment.
Now theunit can
bestarted.
Step 3: Turn Discharge
Plateuntil itdrops.

R2Dice Bowl Assembly
Instructions
“S” Blade
Motor Base
Bowl Lid
Bowl
Motor Shaft
Step 1: Place bowl over
motorshaftpositionedwith
handleslightlytotheleft.
Step 3: Place “S” Blade on
motorshaftinsidebowland
spincounterclockwiseuntil it
locks in place
Step 4: Place Bowl lid
onwithlargesttab on
Bowlslightly totheleft.
Step 5:Twist slightly counterclock-
wiseuntiltabslidesintosafety lock
position.Now theunitcanbe
started.
Step 2: Rotate bowl
counterclockwise until
handleiscentered in front.
Properly assembled
“S” Blade Placement