
QUICK SETUP GUIDE
QX5 Noise Cancelling
Wireless Headset
RF-QX5
Congratulations on your purchase of the RF-QX5 wireless
headset. This headset represents the state of the art in wireless
headset design and is designed for reliable and trouble-free
performance.
Package contents
• QX5 noise cancelling • Small, medium and large
wireless headset ear buds
• USB charging cable • A/C wall charger
• Ear loop • Quick Setup Guide
Features
Charging the battery
• Connect the charger to the headset and to a power outlet.
While the battery is charging, the indicator lights red.When
the battery is fully charged, the indicator lights yellow-green.
Turning the headset on and off
1To turn on the headset, press and hold the power button for
two seconds. The headset beeps and the indicator blinks
yellow-green. (The first time you turn on the headset, you
have to press and hold the power button for five seconds.)
2To turn off the headset, press and hold the power button for
four seconds.The headset beeps and the indicator briefly
lights red.
Pairing the headset
1Press and hold the Power/Send/End button for four
seconds. The indicator rapidly flashes yellow-green.
2Release the button. The headset is now in pairing mode.
3Activate the Bluetooth connection from the phone. See your
phone‘s documentation for instructions.
4Set the phone to start searching for Bluetooth devices.
5Select RF-QX5 from the list of found devices.
6If necessary, enter a PIN Code 0000 to pair and connect the
headset with your phone. In some phones, you need to
make a connection separately after pairing.
Making a call
Volume
down
Indicator
light
Charger
connector
Earpiece
Volume
up
Power/
Send/
End
button
To... Do this...
Voice dial Press the Power/Send/End button.
Redial Double-press the Power/Send/End button.
Answer a call Press the Power/Send/End button.
End a call Press and hold the Power/Send/End button
for two seconds.
Refuse a call Double-press the Power/Send/End button.
Change the volume PresstheVolume up or Volume down button.
Transfer a call between Double press the Power/Send/End button
connected devices while in a call to transfer call to handset.