Rocket Fish RF-WFD301 User manual

Rocketfish Miracast Video Receiver | RF-WFD301
USER GUIDE
Before using your new product, please read these instructions to prevent any damage.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 1 Tuesday, June 4, 2013 10:36 AM

2
Rocketfish RF-WFD301
Miracast Video Receiver
Contents
Introduction .................................................................................................. 2
Features........................................................................................................... 5
Installing the wireless video receiver ................................................... 7
Setting up your receiver connection.................................................... 8
Changing the configuration.................................................................... 9
Disconnecting a Miracast mobile device..........................................11
Updating the firmware ............................................................................11
Troubleshooting ........................................................................................13
Specifications..............................................................................................14
Legal notices ...............................................................................................14
One-Year Limited Warranty....................................................................17
Introduction
Your RF-WFD301 Miracast Video Receiver uses a wireless
communication system to transmit high quality video and audio to
your TV from your mobile device, such as a smartphone or tablet.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 2 Tuesday, June 4, 2013 10:36 AM

3Rocketfish Miracast Video Receiver | RF-WFD301
Safety information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC
SHOCK, DO NOT REMOVE
COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 3 Tuesday, June 4, 2013 10:36 AM

4
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lightning storms or when unused
for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 4 Tuesday, June 4, 2013 10:36 AM

5Rocketfish Miracast Video Receiver | RF-WFD301
Features
• High Resolution-Supports up to 1080p resolution to ensure crisp,
detailed visuals
• Wireless Signal-Stream content from your Android phone or tablet
to your TV through walls and doors over 50 feet, without cables or
a network connection
• Many entertainment options-Stream movies, photos, web
content, music, and other content from your compatible Android
device to your TV (requires a USB power source, not included)
• Leading-edge technology-Miracast technology works well across
Android 4.2.1 and newer devices, regardless of brand
Package contents
Examine the contents of the box for your RF-WFD301 Miracast Video
Receiver. The box should contain:
• Rocketfish Miracast Video Receiver
• 6” HDMI adapter
• 30” Micro USB charger cable
•QuickSetupguide
System requirements
• A digital TV with an HDMI jack and a USB port
• A Miracast enabled mobile device with Android™ Jellybean 4.2.1
or newer
12-1245_RF-WFD301_MAN_V1_EN.fm Page 5 Tuesday, June 4, 2013 10:36 AM

6
Rocketfish Miracast video receiver
#Feature
1 HDMI connector
2WPS button
3MicroUSBjack
4Reset button
5 HDMI adapter cable
6Standard USB connector
7MicroUSBconnector
6
7
1
5
4
3
2
12-1245_RF-WFD301_MAN_V1_EN.fm Page 6 Tuesday, June 4, 2013 10:36 AM

7Rocketfish Miracast Video Receiver | RF-WFD301
Installing the wireless video receiver
To install your wireless video receiver:
1Turn off the TV.
2Insert the Rocketfish Miracast Video Receiver into the HDMI port
on your TV. If the video receiver will not fit into the HDMI port on
your TV (too large or too wide), use the 6" HDMI adapter for a
better fit.
3Insert the micro USB connector into the micro USB port on the
receiver. Insert the other end into the USB port on your TV. If the
TV does not have a USB port, use a powered USB charger (not
included).
4Turn on your TV, then press the TV’s Input or Source button to
select the HDMI input that the Rocketfish Miracast Video Receiver
is connected to.
5The LED on the Rocketfish Miracast Video Receiver starts to blink
and the boot up splash screen is displayed within 30 seconds. If
the LED doesn’t blink or the boot up splash screen is not seen,
check to make sure that the TV input you have selected is correct
and the Rocketfish Miracast Video Receiver has power and is
firmly connected to the TV.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 7 Tuesday, June 4, 2013 10:36 AM

8
Setting up your receiver connection
When used for the first time, the Rocketfish Miracast Video Receiver
starts in Auto mode and is ready to accept a Wi-Fi direct connection.
To set up your receiver connection:
1Make sure that the TV or projector screen shows the Rocketfish
Miracast Video Receiver screen.
2On your Miracast mobile device, such as a smartphone or tablet,
turn on the Wi-Fi network.
3On your Miracast mobile device, select the SSID (network name)
that is displayed on your TV. See the documentation that came
with your Miracast mobile device to complete the setup.
4Press the WPS button on the Rocketfish Miracast Video Receiver.
The blue LED will start to blink while the receiver searches for a
connection.
5When the connection is successful, your Miracast mobile device's
screen is displayed on your TV, indicating that video streaming
has started.
Note: To re-connect a device that has been previously connected, repeat steps 1-5.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 8 Tuesday, June 4, 2013 10:36 AM

9Rocketfish Miracast Video Receiver | RF-WFD301
Changing the configuration
If your TV has HDMI CEC support, you can use your TV remote control
to change the default settings on the Rocketfish Miracast Video
Receiver.
Note: The default settings for your Rocketfish Miracast Video Receiver work in most
scenarios. It's recommended that these settings only be changed by advanced users
with an understanding of this technology.
To change the configuration:
1Make sure that CEC is supported on your TV and is enabled.
Note: CEC may be called something different on your TV. See the documentation
that came with your TV for more information.
2Press the TV’s Input or Source button to select the HDMI input
that the Rocketfish Miracast Video Receiver is connected to.
3Point the remote control at the Rocketfish Miracast Video
Receiver, then use the arrow buttons to select the SETTINGS icon
in the Rocketfish Miracast Video Receiver’s menu to enter the
configuration screen.
4On the configuration screen, you can modify the following
options:
•Mode–
Auto mode
• In Auto mode, the Rocketfish Miracast Video Receiver
displays its SSID on screen, waits for, and then accepts a
Wi-Fi direct connection from a Miracast mobile device,
such as a smartphone or tablet. This mode will enable auto
P2P discovery on the Rocketfish Miracast Video Receiver.
• Use Auto mode for a Google Nexus4 cell phone.
Server mode
• In Server mode, the Rocketfish Miracast Video Receiver
displays its SSID on screen, waits for, and then accepts a
Wi-Fi direct connection from a Miracast mobile device such
as a smartphone or tablet.
• Use Server mode for nVidia Tegra 3 tablets.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 9 Tuesday, June 4, 2013 10:36 AM

10
Client mode
• In Client mode, a new menu is displayed on screen to show
available Miracast source devices that the Rocketfish
Miracast Video Receiver has detected. Use the arrow keys
on your TV remote control to move to the Miracast mobile
device you want to connect to, then press ENTER. Make
sure that your Miracast mobile device is in Server mode
and is ready to accept a connection initiated by the
Rocketfish Miracast Video Receiver.
• Use Client mode for Asus Tegra3 – Miracast-enabled
tablets.
•Wi-Fi band–Select to operate on the 2.4GHz band or the 5GHz
band. Your Rocketfish Miracast Video Receiver defaults to
5GHz.
•Persist–Select to retain or discard settings when your
Rocketfish Miracast Video Receiver powers off and on.
•HDCP–Select Unlock, 2.0 or 2.1. HDCP protects the digital
rights of content owners. Your Rocketfish Miracast Video
Receiver defaults to 2.0.
•HDCP Legacy–Select ON or OFF. Your Rocketfish Miracast
Video Receiver defaults to off.
•Sys Info.–View your Rocketfish Miracast Video Receiver's
system information.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 10 Tuesday, June 4, 2013 10:36 AM

11Rocketfish Miracast Video Receiver | RF-WFD301
Disconnecting a Miracast mobile device
There are a number of options to disconnect a Miracast mobile
device.
To disconnect a Miracast mobile device:
• Turn off your Miracast mobile device.
• Disconnect the Rocketfish Miracast receiver USB cable from the
TV.
• Move your Miracast mobile device 50 ft. or further from the
Rocketfish Miracast receiver.
Updating the firmware
You can update the firmware on your Rocketfish Miracast Video
Receiver using a computer.
To update the firmware:
1Go to www.rocketfishproducts.com, then click Support &
Service. Enter your model number in the box under Manual,
Firmware, Drivers & Product Information, then click Search.
2If a firmware update is available, click on the link to download the
firmware to a local directory on your computer.
3Connect the Rocketfish Miracast Video Receiver (see “Installing
the wireless video receiver” on page 7) to the TV, then
immediately press and hold the RESET button on the receiver
until the firmware update screen is displayed.
The LED on the Rocketfish Miracast Video Receiver starts to blink
and within 30 seconds the firmware update screen is displayed. If
the LED doesn't blink or the firmware update screen is not seen,
check to make sure that the TV input you have selected is correct
and that the Rocketfish Miracast Video Receiver is powered on
and is firmly connected.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 11 Tuesday, June 4, 2013 10:36 AM

12
4On your computer, view your wireless networks, disconnect the
computer from the current network, then connect to the
WiFi-Video-Receiver wireless network.
5Open your web browser and enter http://192.168.16.1 in the
browser tab. Enter “admin” for both user name and password,
then click OK.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 12 Tuesday, June 4, 2013 10:36 AM

13Rocketfish Miracast Video Receiver | RF-WFD301
6Click Browse to open the file you downloaded in step 2.
7Click Upload new Firmware to begin the firmware update. This
process takes approximately two to three minutes, depending
upon the connection speed between your computer and the
Miracast receiver.
8When Firmware upgrade complete is displayed, click Continue.
9The TV screen will show the message “System update in
progress…Do not power down, system will restart automatically,“
the Rocketfish Miracast Video Receiver will reboot.
Troubleshooting
Please read this User Guide carefully before using your wireless video
receiver. Check this list for a possible troubleshooting solution before
calling for service.
Problem Solution
No picture or sound • Move the Rocketfish Miracast Video Receiver closer to the Miracast mobile device.
The maximum connection distance is approximately 50 ft.
• Check the wireless connection and make sure that the devices are connected.
• Make sure that the Rocketfish Miracast Video Receiver and the Miracast mobile
device are turned on.
• Make sure that you have selected the correct HDMI input on your TV.
• Make sure the Rocketfish Miracast Video Receiver is receiving power.
Poor picture or sound • Move the Rocketfish Miracast Video Receiver closer to the Miracast mobile device.
The maximum connection distance is approximately 50 ft.
• Make sure the Rocketfish Miracast Video Receiver has a secure connection to the
HDMI port and USB port.
• Change the frequency band of your Wi-Fi connection from 5 GHz to 2.4 GHz or from
2.4 GHz to 5 GHz.
• If you are using a microwave oven in the immediate area, turn it off.
• Check the battery level of the Miracast mobile device.
Picture or sound cuts out • Make sure that the streaming signal to your Miracast mobile device is strong and
consistent (three bars minimum).
My Miracast mobile device will not
connect to the Rocketfish Miracast
Video Receiver
• Make sure the Rocketfish Miracast Video Receiver has a secure connection to the
HDMI port and USB port.
• Make sure the WPS button has been pressed and the blue LED is flashing.
• Make sure your mobile device’s Wi-Fi is turned ON.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 13 Tuesday, June 4, 2013 10:36 AM

14
Specifications
Miracast Receiver
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
My TV remote control will not
communicate with the Rocketfish
Miracast Video Receiver
• Make sure that CEC is supported on your TV and is enabled. Check the
documentation that came with your TV for more information.
• Make sure to point the remote directly at the Rocketfish Miracast Video Receiver.
• Make sure there is nothing blocking the Rocketfish Miracast Video Receiver.
• You may be too far away. Move closer to the Rocketfish Miracast Video Receiver.
• Your remote control may have a low battery. Replace your remote control battery.
Dimensions (HxWxD) • .5 x 3.5 x 1.25 inches (12.7 x 89 x 31.7 mm)
Weight • 4 oz. (113.4 gm)
Bands • 2.4 and 5 GHz
Range •Over50feetthroughwalls.
Certification • Wi-Fi certified
Problem Solution
12-1245_RF-WFD301_MAN_V1_EN.fm Page 14 Tuesday, June 4, 2013 10:36 AM

15Rocketfish Miracast Video Receiver | RF-WFD301
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Copyright
© 2013 Rocketfish. Rocketfish and the Rocketfish logo are trademarks
of Best Buy Enterprise Services, Inc. Other brands and product names
are trademarks or registered trademarks of their respective holders.
Specifications and features are subject to change without notice or
obligation.
For service and support call [phone].
12-1245_RF-WFD301_MAN_V1_EN.fm Page 15 Tuesday, June 4, 2013 10:36 AM

16
12-1245_RF-WFD301_MAN_V1_EN.fm Page 16 Tuesday, June 4, 2013 10:36 AM

17Rocketfish Miracast Video Receiver | RF-WFD301
One-Year Limited Warranty
Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new
RF-WFD301 (“Product”), that the Product shall be free of defects in the original manufacture of
the material or workmanship for one (1) year from the purchase of the Product (“Warranty
Period”). This Product must be purchased from an authorized dealer of Rocketfish brand
products and packaged with this warranty statement. This warranty does not cover refurbished
Product. If you notify Rocketfish during the Warranty Period of a defect covered by this
warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days), beginning on the date you purchased the
Product. The purchase date is printed on the receipt you received with the product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the
Product is determined to be defective by an authorized Rocketfish repair center or store
personnel, Rocketfish will (at its sole option): (1) repair the Product with new or rebuilt parts; or
(2) replace the Product at no charge with new or rebuilt comparable products or parts. Products
and parts replaced under this warranty become the property of Rocketfish and are not returned
to you. If service of Products and parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you own your Rocketfish Product
during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the
Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the Product
to the store you purchased it from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of protection as the original
packaging. If you purchased the Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that you put the Product in its
original packaging or packaging that provides the same amount of protection as the original
packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United States, Canada,
and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
•Installation
•Setupadjustments
• Cosmetic damage
12-1245_RF-WFD301_MAN_V1_EN.fm Page 17 Tuesday, June 4, 2013 10:36 AM

18
• Damage due to acts of God, such as lightning strikes
• Accident
•Misuse
•Abuse
•Negligence
• Commercial use
• Modification of any part of the Product, including the antenna
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by Rocketfish to service the
Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD
SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER
THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Rocketfish:
For customer service please call 1-800-620-2790
www.rocketfishproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2013 Best Buy Enterprise Services, Inc.
All rights reserved. ROCKETFISH is a trademark of Best Buy Enterprise Services, Inc. Registered in
some countries. All other products and brand names are trademarks of their respective owners.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 18 Tuesday, June 4, 2013 10:36 AM

V1 ENGLISH 12-1245
www.rocketfishproducts.com [phone]
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2013 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.
All other products and brand names are trademarks of their respective owners.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 20 Tuesday, June 4, 2013 10:36 AM