Installation Instructions
Remove Skewer
Remove QR skewer from main body by holding xed end
and unscrew handle
Place a split washer, then a at washer onto an M6x25 bolt.
Pass bolt through mounting hole and loosely thread into
track plate. Repeat for the other bolt
Install Track Kit
Mount body to Track
Slide assembly onto track from either end. Tighten two
M6 bolts using T30 torx key. Reinstall QR skewer
Loading A Bike
With QR handle open and xed end pointed down, load bike fork
onto skewer. Adjust tightness by turning handle. Close handle by
ipping 90°. If too tight or too loose, open handle and re-adjust
until handle closes with tension. Shake fork side to side to ensure
bike is securely mounted. Lock handle with key
1
5
2
6
34
Check all fastenings (nuts, bolts, straps, and skewer) before each use.
QR skewer is not an on/off switch. Handle must close with enough tension to hold bike. Shake bike side to side to ensure proper
mounting. Fork should be properly seated and not move. If at all unsure, do not use.
Remove Baby Seats, Panniers, U-Locks, or items that could detach from the bicycle.
Not intended for off road use. Not intended for use on trailers or towed vehicles.
Locks are only deterrents to thieves, RockyMounts™, Inc. cannot be held liable for stolen bicycles.
RRemove bike before entering a car wash.
Once a year, remove rack from car. Clean and inspect for damage.
Thank you for purchasing a RockyMounts™ product. We take pride in providing a great customer experience and manufacturing
products that enable our customers to get their gear to their next colorful adventure.
As of January 1, 2014, RockyMounts™ products are covered for life to the original purchaser when used in accordance with the instruction
manuals’ assembly, installation and use guidelines.
IIf you feel something broke before it’s time, please email us at ride@rockymounts.com or call us at 800.873.1871. For the most efficient
service, email a digital photo (we need this photo to verify the problem) of the product in question, a brief description of the situation,
and your purchase receipt. Our techs will respond within one business day. Most of the time we’ll replace the part in question, but we
may ask for more details.
RockyMounts™, Inc. warranty only covers RockyMounts™, Inc. products. It does not cover theft, or damage to vehicles and/or equipment.
All products purchased prior to Jan 1, 2014 are covered by a one-year warranty; see your product manual for details.
