Roland VersaStudio BN-20 User manual

BN-20
Ver.1.0 December 5th, 2011
WASTE LIQUID HANDLING
Confidential

- 2 -
WASTE CARTRIDGE REPLACEMENT (Referential Time : 10min.)
Parts NO: 1000007723
Parts Name: ASSY,DRAIN BN-20
Necessary Items
Refer to the section titled “Replacing the Waste Cartridge” in the MASTER GUIDE of BN-20 to perform the
following steps.
1
Turn off the sub power SW and main power SW.
Disconnect the USB Cable.
2
OFF
Remove the Waste Cartridge.
3
Insert the new Waste Cartridge.
Waste Cartridge
Waste Cartridge
The waste liquid can be discarded by either replacing the Waste Cartridge or only the Drain
Pad inside the cartridge.

- 3 -
DRAIN PAD REPLACEMENT (Referential Time : 10min.)
Parts NO: 1000008938
Parts Name: ASSY,DRAIN PAD BN-20
Necessary Items
1
Turn off the sub power SW and main power SW.
Disconnect the USB Cable.
2
34
OFF
Remove the 4 screws which fix the Drain Tank Cover.
Remove the Waste Cartridge.
Remove the current Drain Pad with the tweezers.
Necessary Tools
Glove Tweezers
Screw
Drain Tank Cover
Screw
Drain Pad
Wear a glove to prevent your hand from getting dirty.
Waste Cartridge

- 4 -
5
67
Insert the Waste Cartridge.
Fix the Drain Tank Cover with 4 screws.
Screw
Drain Tank Cover
Screw
Be careful about the insering direction of the Drain
Pad.
Insert the new Drain Pad to the Drain Tank Case.
T
F
Drain Tank Case
Drain Pad
<Front Side>
[F] faces the front of the machine.
[T] faces up.
Waste Cartridge