Rompa 19355 User manual

Page 1of 2 Copyright ROMPA® Ltd
BOING BALL 19355, SW 02.08
1
BOING BALL - 19355
CONTENTS
1 x Boing Ball
USE
Pull out battery seal
Boing changes colour with a simple squeeze of your hand.
BATTERY CHANGE
Pull off rubber mantle
Unscrew the 2 halves
Remove lid (2 screws)
Insert batteries observing the polarity indicated. Only use
the batteries specified (3 x 1.5V/AAA). Remove empty
batteries from the product. Non-rechargeable batteries must
not be recharged! Do not use different types of batteries,
and do not mix new and used batteries. Always dispose of
batteries safely.
off
blue
green
red
purple
cyan
yellow
white
slow transition
fast transition

Page 2of 2 Copyright ROMPA® Ltd
BOING BALL 19355, SW 02.08
2
GENERAL CARE
Don’t drop the Boing ball from large heights or throw it against hard surfaces. It is not
designed to bounce, and the electrics might get damaged.
If the rubber skin is dirty, it can be removed from the ball and gently washed with soap and
water. To restore its original silky feel, dry it completely and treat with regular talcum powder
before putting it back in place.
Please retain this information for future reference.
SPECIFICATION
Material: Rubber
Size: 7cm diameter
SAFETY
Always supervise the use of this product.
For 6 years and over.
Conforms to EN71 safety standards.