Romus 93448 User manual
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
915mm
915mm
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
Type de produit Parasol chauffant
Modèle
HP15
Code Pays CH-ES-FR-GB-
GR-IE-IT-PT
BE-CY-CZ-DK-EE-FI-
GR-IT-LT-LV-MT-NL-NO
-SE-SI-SK-BG-RO-TR
CZ-FR-GB-
GR-IE-PT PL AT-CH-DE
AT-CH-DE-
NL
Catégorie I
3+(28-30/37)
I
3B/P(30)
I
3P(37)
I
3B/P(37)
I
3B/P(50)
I
3P(50)
Gas G30 G31 G30/G31 G31 G30/G31 G30/G31 G31
Pression (mbar) 28-30 37 30 37 37 50 50
Puissance 12.5KW 12KW 13.5kW 12.5KW
Consommation 909g/h 873g/h 982g/h 909g/h
Taille de
l’injecteur (mm) 1.70 1.60 1.60 1.60
&+$8))$*(3$5$62/,12;.:
5()
13
14
15
17
17
18
18
18
18
19
19
19
20
21
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
PART LIST
ASSEMBLY PARTS SUPPLIED:
z5pcs bolts M5 x 12 and 5pcs M5 washers for rear panel of housing and base.
z5pcs bolts M5 x 12 and 5pcs M5 washers for rear panel of housing and housing lid.
z4pcs bolts M6 x 12 and 4pcs M5 washers for the post and housing lid.
z3pcs round cap nuts M6 and 3pcs M5 washers for reflector.
z3pcs bolts M5 x 12 and 3pcs M5 big washers for main burner and the post.
z4pcs bolts M5*10,4pcs M5 nuts and 4pcs washer for securing a gas cylinder.
PATIO HEATER PART:
Item No Description Qty
1 Reflector 1
2 Burner screen 1
3 Lower tray of burner 1
4 Lower screen cone Assembly 1
5 Main post 1
6 Housing lid 1
7 Rear panel of housing 1
8 Wheels 1
9 Base 1
10 Door 1
11 Hinge 2
12 Assembly Bolt M5x12 17
13 Washer M5 17
14 Big washer M6 3
15 Round cap nuts M6 3
16 Lock 1
17 Plastic cover 1
18 Inner pipe 1
19 Ignition 1
FIGURE 2
PATIO HEATER ASSEMBLY
ASSEMBLY INSTRUCTIONS
zList of Required Tools:
Philip Screwdriver / Adjustable Spanners / Wrenches
zLeak Detection Solution one part detergent and three parts
water
zAssemble all nuts and bolts loosely at first. Tighten all
connections after completion of assembly. This eases your
work and increases the stability of your appliance.
zBefore assembly, make sure all packing material and any
transmit protection must be moved.
zSmall deviations in equipment may occur. This is no lack of
quality but subject to improvements.
ASSEMBLY
SETP 1: Screw rear panel of housing to the base with 5pcs bolts
M5 x 12 and 5pcs washers. (Detail Abb.A)
Note: Start with two bolts at both ends of rear panel of
housing, then three bolts in the middle, which will ease the
assembly.
SETP 2: Place the housing lid onto rear panel of housing. Screw
together the housing lid and rear panel of housing with
5pcs bolts M5 x 12 and 5pcs washers. (Detail Abb. B)
SETP 3: Fix the post onto the housing lid with 4pcs bolts M5 x 12
and 4pcs washers. Then put the plastic cover over the
screws and bolts through the post. (DetailAbb. C)
SETP 4: Place the reflector to main burner using 3pcs round cap
nuts and 3pcs big washers. (Detail Abb. D)
SETP 5: Tighten inner gas pipe to main burner (See Figure 2),
Note: please examine the tightness before use. If
damages are evident, they must be eliminated
immediately. (See Leakage Test)
Then fix main burner to the post with 3 bolts M5 x 12 and
3pcs washers. (Detail Abb. E)
SETP 6: Fix the door to rear panel of housing. (See Figure 1 and
Detail Abb. F)
DetailAbb.A
DetailAbb.B
DetailAbb.C
DetailAbb.D
DetailAbb.E
DetailAbb.F
&+$8))$*(3$5$62/,12;.:
5()
Leak Test Point ①②③④
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
&+$8))$*(3$5$62/,12;.:
5()
Other Romus Patio Heater manuals
