ROOMS TO GO Collin Park HLVN 10021-02 User manual

ASSEMBLY
INSTRUCTION
STATIONARY LOVESEAT
HLVN
10021
/
10023
/
10024
/
1002
A
Manufactured for Room To Go
HLVN SKU:
10021
-
02
15500336
10023-02 15500312
10024
-
02
15500324
1002
A
-
02
11500318
LIST OF PARTS
NO. Description Item Qu ntity
A Backre t 1
B LSF Wing 1
C RSF Wing 1
D Seat 1
E Pla tic Leg 4

ASSEMBLY INSTRUCTIONS
Step
1
:
Take out carefully the back cu hion, wing & eat from the packing.
Step 2: With eat cu hion facing up ide down. Unzip bottom fabric & remove the pla tic leg from in ide.
Turn 4 pc pla tic leg clockwi e until it ha been completely crewed in.
Step 3: Po iting the female metal receiver bracket over the male metal po t . Pu h down the female bracket
over male po t imultaneou ly until each ide i locked into place an audile "click" i heard.
Step 4: In ert the wing to the back on both ide . Plea e pay attention to the direction .

WARNINGS
*
Keep
unit
at
lea t
24
"
from
all
heat
ource
.
* Avoid placing unit in area where unit can be expo ed to direct unlight other powerful light ource , a fading or
di coloration may occur.
* Do not it on arm or backre t.
* Do not jump or roughhou e on furniture.
* If unit mu t be moved, do not drag. Unit mu t be lifted in order to be moved.
CARE AND CLEANING
* Uphol tered furniture i packaged tightly to protect it during tran it. Thi packaging can ometime cau e
crea e or mi haped cu hion when the furniture come out of the packaging. The e i ue will correct
them elve over time a the fiber of the cu hion are expo ed to air. However, haping the cu hion with your
hand can alleviate the crea e and compre ed fiber more quickly.
* U e a vacuum cleaner to remove du t and debri from eam and creva e .
* U e a oft damp cloth to gently clean oiled area and wipe clean. Do not rub.
* Do not u e hou ehold cleaner or olvent . Such cleaner may cau e damage and/or di coloration.
* Do regularly u e dedicated leather care product onto the leather furniture to prevent built up of body oil .
TROUBLE SHOOTING
PROBLEM SOLUTION
Backre t gap En ure the backre t are properly clipped into the male po t located on eat
mechani m. Check that bracket are not loo e, po itioned improperly or bent.