ROOMS TO GO 40 CREEKSIDE 2.0 User manual

-
Read all the instructions, identify all components, and be sure you have all parts prior to assembly.
-
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
for replacement parts and instructional literature if needed.
40 CREEKSIDE 2.0
Trundle bed assembly instructions
35440407 40G-744 TRUNDLE BED CHARCOAL
35440419 40B-744 TRUNDLE BED CHESTNUT
PARTS LIST QTY PARTS LIST QTY
11 Pc 61 Pc
Front panel Right slat pack
51 Pc
1/2" Screw
Left slat pack
21 Pc 72 Pc
Back panel Dividers
31 Pc
Left side
11/7/2022 Page 1 of 3
41 Pc
HARDWARE LIST QTY TOOLS NEEDED
2 Pcs
Phillips screwdriver (not included)
Plastic plate
6 Pcs
Right side

Before you start, carfully unpack and identify each component
and hardware to make sure you have everything you need, check
on the bottom of the frame componenets (1,2,3,4) they should
have matching numbers (front XXXX, back XXXX, Right XXXX
& left XXXX)
ASSEMBLY INSTRUCTIONS
Remove the four screws in both side panels and save for re-attach.
Assemble front and side paneles Fasten using the screws removed in previous step.
Unfold left and right slat packs and place them on top of
repeat the same process for right side and back panels. the panel's cleats
11/7/2022 Page 2 of 3
STEP 4
STEP 3
STEP 5
STEP 1
STEP 2

11/7/2022 Page 3 of 3
ASSEMBLY INSTRUCTIONS
Install plastic plates, one in each front post of the headboard & footboard as shown, fasten with three screws.
STEP 6