ROOMS TO GO HLVN 7105R1-39 User manual

ASSEMBLY INSTRUCTION
DUAL POWER SOFA
HLVN 7105R1 / 7105R2 / 7105R3
Manufacture for Rooms To Go
IMPORTANT:
ASSEMBLING
THIS
UNIT
NEEDS
MINIMUM
2
PERSONS
HLVN SKU:
7105R1-39 15171553
7105R2-39 15171565
7105R3-39 15171577
LIST OF PARTS
NO. Descriptio Item Qua tity
ABackrest
(LSF, Mi le, RSF) 3
B Seat 1
CWall plug
transformer 1
D Woo Leg 4
E Plastic Leg 6
F Bolt 16

ASSEMBLY INSTRUCTIONS
Step
1:
Take out carefully the back cushions & inner carton from the packing.
Step 2: With seat cushion facing upsi e own. Attach 4 pcs woo legs (using 4 bolts per leg) & turn
6 pcs plastic legs clockwise until it has been completely screwe in.
Metal plate have to be aligne in a certain irection as shown in the following pictures.
Step 3: Flip platform an cushion over so it is right si e up. Test the sofa to make sure that it is level
an sitting evenly on the floor.
POWER CONNECTION
Step 4: Connect the a justable hea rest cables, then place seat back cushions accor ingly.
Allow sufficient space between reclining sofa an the wall behin it.
Step 5: Connect wall plug transformer to transformer switch.
An connect transformer plug to electrical outlet.

ELECTRICAL CONTROLS
1 Press button to recline the sofa to esire position
2 Press button to raise the sofa to the upright position.
3 Press button to activate the hea rest forwar .
4 Press button to return hea rest to the close position.
5 Press home button returns both footrest an hea rest to the
original upright or close position.
6 USB port
WARNINGS
* Keep unit at least 4" from wall.
* Keep unit at least 24" from all heat sources.
* Avoi placing unit in areas where unit can be expose
to irect sunlight other powerful light sources, as fa ing
or iscoloration may occur.
* Do not reach un er seat when mechanism is operating or serious injury may occur.
* Reclining mechanism shoul only be operate while seate properly.
* Do not sit on arms or backrest.
* Do not jump or roughhouse on furniture.
* If unit must be move , o not rag. Unit must be lifte in or er to be move .
* Do not continuously operate mechanism for more than one minute or unit may go into
protection mo e by shutting own to prevent overheating.
* Unplug unit from power source prior to cleaning mechanism.
* Do not allow electrical components to come into contact with any liqui s.

CARE AND CLEANING
* Upholstere furniture is package tightly to protect it uring transsit. This packaging can sometimes cause
creases or misshape cushions when the furniture comes out of the packaging. These issues will correct
themselves over time as the fibers of the cushions are expose to air. However, shaping the cushions with
your han s can alleviate the creases an compresse fibers more quickly.
* Use a vacuum cleaner to remove ust an ebris from seams an crevasses.
* Use a soft amp cloth to gently clean soile areas an wipe clean. Do not rub.
* Do not use househol cleaners or solvents. Such cleaners may cause amage an /or iscoloration.
* Do regularly use e icate leather care pro uct onto the leather furniture to prevent built up of bo y oils.
TROUBLE SHOOTING
PROBLEM SOLUTION
Hea rest not working Ensure that wall power outlet is functional Step 5
Ensure that hea rest power cable is plugge into the seat cable Step 4
Not Reclining Ensure that wall power outlet is operational Step 5
USB not working Check all power connections Step 4, 5
Backrests gaps Ensure the backrests are properly clippe into the male posts locate on seat
mechanism. Check that brackets are not loose, positione improperly or bent.