ROOMS TO GO Juno HILB 7169-771 User manual

ASSEMBLY INSTRUCTION
HILB 7169-771 Juno 2 Drawer Nightstand -SKU 34271697
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Identify and count all parts and compare with the Hardware List below:
1 of 4
A
B
B
B
No Picture
Picture
Description
Allen Wrench
JCBC Bolts (M6)
Dimension
4 x 58mm
6 x P1.0 x 45mm
Qty
1
4
Qty
1
4
Part List
Hardware List
1
2
No
A
B
Version - 09-11-2020
Description
Night Stand
Bunn Feet
PART DETAILS
1
Tipping Restraint
C
SPRING WASHER (M6) 6 x 11mm 4
FLAT WASHER (M6) 6 x 19mm 4
DO NOT USE SUBTITUTE PARTS. PLEASE CONTACT YOUR RETIAL STORE OR WWW.ROOMSTOGO.COM
WITH SERVICE OR PARTS REPLACEMENT REQUEST

ASSEMBLY STEP
2 of 4
***Caution: Please read all instructions carefully before starting the assembly process. These
parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
Secure Bunn Feet (B) to Night Stand (A) using 1 JCBC (2) per foot. Tighten bolts using
Allen Wrench (1) provided. The assembly is now complete.
Begin assembly by removing Bunn Feet (B) from bottom of drawer of Night Stand (A).
STEP 1
STEP 2
A
A
B
B
B
B
B
AB
2
HILB 7169-771 Juno 2 Drawer Nightstand -SKU 34271697

ASSEMBLY STEP
3 of 4
***Caution: Please read all instructions carefully before starting the assembly process. These
parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
To prevent the Night Stand (A) from tipping, mount one side of the Tipping Restraint (C) to the
backside of the Night Stand (A) and the other side to the wall.
STEP 3
WALL
C
HILB 7169-771 Juno 2 Drawer Nightstand -SKU 34271697
A

ASSEMBLY STEP
4 of 4
***Caution: Please read all instructions carefully before starting the assembly process. These
parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
Insert card into the slot.
STEP 4
HILB 7169-771 Juno 2 Drawer Nightstand -SKU 34271697
A
CARD

Wooden Furniture Care
Protect Your Investment
The beauty of furniture care is that it helps to protect your investment. Fine furniture is an
important purchase. Proper care will help maintain your furniture’s finish and ensure that it
looks great year after year.
Caring For Furniture
Caring for furniture is easy. Following a few simple guidelines will help extend the life of your
furniture.
*Always dust with a polish moistened cloth. Polish cushions the cloth, eliminating the
scratching that occurs with dry dusting. Dust will scratch the furniture surface if not removed
quickly. Use a soft, clean cloth that won’t scratch the surface. Avoid coarse or scratchy
materials or fabrics.
*Avoid using soap and water on furniture. Water can penetrate the finish and raise the grain on
wood, causing damage.
The Enemies of Furniture
Many common problems in furniture care are caused by the elements. If you are aware of
these troublemakers, the resulting damage can easily be avoided.
*Sunlight’s ultraviolet rays can damage wood finishes. Arrange furniture out of direct sunlight,
use sun screening drapes during intense sunlight hour, rotate furniture in place and in room
arrangements.
*Liquid spills will damage furniture if not removed promptly. Use coasters under beverage
glasses saucers under cups and flowerpots. If a spill occurs, immediately blot it gently without
rubbing the surface.
*Heat creates a chemical change in the furniture finish. Which can result in a white spot. Use
protective pads under hot dishes, utensils or cooking appliances.
*Cyclic changes in temperature can damage furniture. I-lot blasts of air such as those found
from central heating should be avoided because they cause extreme localized drying of the
wood.
Tips for Better Dusting
*Be sure in use the sauce type of polish consistently. Your furniture will appear cloudy or
streaky if oil-based and wax-based polishes are interchanged.
*Always use a fine furniture polish when dusting. Never dry dust, as it could cause microscopic
scratches on your furniture surface. Remember to change dusting clothes frequently since a
dirty cloth may scratch your furniture’s surface.
*Spray your furniture surface evenly, but not too generously. Wipe in a circular motion with a
soft, clean cloth to clean and loosen the old polish.
*Then, buff until completely dry for a beautiful shine and a smudge-resistant finish. For wood
trim, spray polish on the cloth first, and then dust.