ROOMS TO GO SYNE 1857B-73PHR User manual

Parts and Hardware List
Qty
1A LSF Wing 1 E RSF Wing
Assembly Instructions
SYNE 1857B-73PHR Reclining Console Loveseat w/Pwr headrest
SKU# 15208538 15208514 15208526
***CAUTION: The item is heavy, assembly should be performed by two people.
No Description Image Qty No Description Image
1
B
Transformer
LSF Back Cushion
D RSF Back Cushion 1
CConsole Back
Cushion 1 G
1 F Lovesesat console
Recliner Base 1
Manufactured for Rooms To Go

C
D
A
B
C
D
Step2
Locate the power cord C
attached to the bottom back
and connect to plug D located
at the rear of seat.
Step 1
Slide the metal receiver over the
metal post.Press both sides of back
firmly downward until locked in
place.
A
B
C
D
Step 4
The Transfomer is attached to the bottom
of rail and connect to DC Port located at
the rear of arm.
Male
Step 3
Insert the male KD Bracket into the slot
of the female Bracket pressing firmly
downward until the frame is tight.
Female
Note: Make sure all PLUGS are connected
on the product before plugging power cord
into power outlet. If not damage can occur.
The USB ports (where applicable) are
designed with working voltage of 5V, and
can NOT be used to supply power for
laptop computers (neither PC or Mac).
Plugging a laptop computer to the USB port
may end up damaging either the computer
or the USB port due to unmatched working
voltage.
voltage.