ROSE DISPLAYS ANOMULTI SQUARE WITH CABLE CLIP AND CABLE AND... User manual

35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Parts
Instruction Sheet
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Place cable onto inner channel of Cable Clip. The
cable should snap into place. Fig. 3
Step 4
Align one end of the Cable Clip with the top
channel of the aluminum holder. Then insert one
round end, then press down on the other round
end and slide Cable Clip into rail. Fig. 4
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster. Fig. 6
Important note:
Please save and reuse the AnoMulti, Cable Clips,
End caps and MultiClips for future projects.
AnoMulti™
Instructions for Hanging
Incept-9.27.02
Figure 1 Figure 2
The AnoMulti™ and Slim™are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQCableClipSaucer
Figure 6Figure 5
Figure 3 Figure 4
AnoMulti
12AM300SQ
End Cap
06-5545
Cable Clips
06-5050
Cable and
Saucer
16-0018SS

35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Parts
Instructions for Hanging
Instruction Sheet
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Place cable onto inner channel of Cable Clip. The
cable should snap into place. Fig. 3
Step 4
Align one end of the Cable Clip with the top
channel of the aluminum holder. Then insert one
round end, then press down on the other round
end and slide Cable Clip into rail. Fig. 4
Note: For OneUp applications, the AnoMulti
Holder is conveniently marked in the center.
Slide the Cable Clip to the mark.
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster.
Important note:
Please save and reuse the AnoMulti, Cable Clips,
End caps and MultiClips for future projects.
AnoMulti™
Incept-9.27.02
Figure 1 Figure 2
The AnoMulti™ and Slim™are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQCableClipSaucer
Figure 6Figure 5
Figure 3 Figure 4
AnoMulti
12AM300SQ
End Cap
06-5545
Cable Clip
06-5050
Cable and
Saucer
16-0018SS

Parts
Instruction Sheet
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Place cable onto inner channel of Cable Clip. The
cable should snap into place. Fig. 3
Step 4
Align one end of the Cable Clip with the top
channel of the aluminum holder. Then insert one
round end, then press down on the other round
end and slide Cable Clip into rail. Fig. 4
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster. Fig. 6
Important note:
Please save and reuse the AnoMulti, Cable Clips,
End caps and MultiClips for future projects.
AnoMulti™
Instructions for Hanging
Incept-9.27.02
Figure 1 Figure 2
The AnoMulti™ and Slim™are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQCableClipSaucer
Figure 6Figure 5
Figure 3 Figure 4
AnoMulti
12AM300SQ
End Cap
06-5545
Cable Clips
06-5050
Cable and
Saucer
16-0018SS

Parts
Instructions for Hanging
Instruction Sheet
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Place cable onto inner channel of Cable Clip. The
cable should snap into place. Fig. 3
Step 4
Align one end of the Cable Clip with the top
channel of the aluminum holder. Then insert one
round end, then press down on the other round
end and slide Cable Clip into rail. Fig. 4
Note: For OneUp applications, the AnoMulti
Holder is conveniently marked in the center.
Slide the Cable Clip to the mark.
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster.
Important note:
Please save and reuse the AnoMulti, Cable Clips,
End caps and MultiClips for future projects.
AnoMulti™
Incept-9.27.02
Figure 1 Figure 2
The AnoMulti™ and Slim™are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiSQCableClipSaucer
AnoMulti
12AM300SQ
Figure 6Figure 5
Figure 3 Figure 4
End Cap
06-5545
Cable Clip
06-5050
Cable and
Saucer
16-0018SS