ROSE DISPLAYS ANOMULTI ROUND WITH MULTICLIPS User manual

35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Parts
Instruction Sheet
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Squeeze sides of MultiClip together. Fig.3
Step 4
Align the bottom rail of the MultiClip with
the top channel of the aluminum holder. Slide
MultiClip into rail. Fig. 4 Repeat steps 3 & 4
for second MultiClip.
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster. Fig. 6
Important note:
Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.
AnoMulti™
Instructions for Hanging
Incept-7.31.02
Figure 1 Figure 2
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiMC
End Caps
06-5525
MultiClips
1UP-0101
AnoMulti
12AM300R
Figure 6Figure 5
Figure 3 Figure 4

35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Parts
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Squeeze sides of MultiClip together. Fig.3
Step 4
Align the bottom rail of the MultiClip with
the top channel of the aluminum holder.
Slide MultiClip into rail. Fig. 4
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster. Fig. 6
Important note:
Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.
Instructions for Hanging
OneUp
®
Instruction Sheet
AnoMulti™
Incept-7.31.02
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiMC
End Caps
06-5525
MultiClip
1UP-0101
AnoMulti
12AM300R
Figure 1 Figure 2
Figure 6Figure 5
Figure 3 Figure 4

Parts
Instructions for Hanging
Instruction Sheet
AnoMulti™
Instructions for Hanging
Incept-7.31.02
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiMC
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Squeeze sides of MultiClip together. Fig.3
Step 4
Align the bottom rail of the MultiClip with
the top channel of the aluminum holder. Slide
MultiClip into rail. Fig. 4 Repeat steps 3 & 4
for second MultiClip.
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster. Fig. 6
Important note:
Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.
End Caps
06-5525
MultiClips
1UP-0101
AnoMulti
12AM300R
Figure 1 Figure 2
Figure 6Figure 5
Figure 3 Figure 4

Parts
Instructions for Hanging
AnoMulti™
Instructions for Hanging
Incept-7.31.02
The AnoMulti™ and Slim™ are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSAnoMultiMC
Step 1
Insert the poster into the Slim Holder by either
sliding the poster into the holder or tapping the
holder onto the poster. . Fig. 1
Note: For thinner substrates, it may be neces-
sary to staple the edge of the graphic before
inserting into Slim Holder.
Step 2
Slide Slim holder into AnoMulti holder. Fig. 2
Step 3
Squeeze sides of MultiClip together. Fig.3
Step 4
Align the bottom rail of the MultiClip with
the top channel of the aluminum holder.
Slide MultiClip into rail. Fig. 4
Step 5
Push end caps into place. Fig. 5
Step 6
Suspend poster. Fig. 6
Important note:
Please save and reuse the AnoMulti holder,
End caps and MultiClips for future projects.
OneUp
®
Instruction Sheet
End Caps
06-5525
MultiClip
1UP-0101
AnoMulti
12AM300R
Figure 1 Figure 2
Figure 6Figure 5
Figure 3 Figure 4