Product Power Cord Requirements
EMC Notices
US FCC Part 15
This equipment has been tested and found to comply with the limits for a class A Digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a Commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
CANADA
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe “A” est conforme a la norme NMB-003 du Canada.
Warning Refer all servicing to qualified personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug damage, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Caution To reduce the risk of fire, replacement fuses must be the same type and rating.
Warning This product contains safety critical parts, which if incorrectly replaced may present a risk
of fire or electrical shock. Components contained within the product’s power supplies and
power supply area, are not intended to be customer serviced and should be returned to the
factory for repair
Warning North American Line Voltages 100 - 120 Volt
This product is supplied with certified 10A/125V SVT type supply cords.
Conductors are color coded white (neutral), black (line) and green or green/yellow
(ground).
Operation of this equipment at line voltages exceeding 130V requires that alternative
supply cords with appropriate voltage and current ratings be used.
Warning International Line Voltages 200 - 240 Volt
This product has been designed for use with certified IEC 320- C13 10A/250V - H03
VV-F3G 1.00mm2 type line cord.
International product orders are supplied with a certified 10A/250V line cords, utilizing a
molded 3-pin IEC 320-C13 type connector at one end and stripped conductors on the
other. One line cord is provided. Conductors are CEE color coded; blue (neutral), brown
(line), and green/yellow (ground).
Installation by a qualified Electrician, of an appropriately approved A/C wall plug
certified for the country of use, is required.
Alternatively, other IEC 320 C-13 type power cords may be used, provided that they meet
the necessary safety certification requirements for the country in which they are to be
used. Refer to the correctly specified line cord above.
Notice Changes or modifications to this equipment not expressly approved by Ross Video Ltd. could
void the user’s authority to operate this equipment.
