RovyVon Aurora Series User manual

Ready to go with what you can rely on!
Primary Features
 Ultra compact size easy to carry for various applications
 Electronic side switch for easy one-hand operation
 High CRI (90+, Nichia), max 550 lumens (CREE)
 Powered by 130mAh Li-polymer rechargeable battery
 Built-in Micro USB charging port with indicator
 Quick charge in 45 minutes
 Low battery indicator
 Temperature controller to protect the core components and the user
 Clip slots design and a two-way clip included
 IP65 water resistance
Dimensions
Length: 53.9mm
Diameter: 14.5mm
Weight: A1: 11.8g / A2: 28g / A3: 14g / A4: 18.8g (Battery included)
Nichia version available for A3 & A4 only
Accessories: Lanyard, user manual, stainless steel clip, USB cable
Battery specifications
Polymer Li-ion
battery
Dimensions
Standard
voltage
Capacity
Rechargeable
501030
4.2 V
130 mAh
Product Parameters
LED:
1. CREE: XP-G3 S5 6500K
2. Nichia: 219C R9050 4500K CRI 90+
Mode
Specification
LED
Low
High
Med
Strobe
CREE
22 Lm
550 Lm
230 Lm
550Lm
NICHIA
12 Lm
350 Lm
170 Lm
/
CREE
150
Minutes
38
Minutes
55
Minutes
/
NICHIA
190
Minutes
30
Minutes
50
Minutes
/
CREE
980 cd
NICHIA
650cd
CREE
80m
NICHIA
60m
1.5m
IP65 water resistance
Note: The above mentioned parameters are approximate and may
vary between flashlight and environments.
Aurora Series User Manual
Patent number: ZL 2017 3 0661982. 3
User Interface
Operation/LED
CREE
Nichia
Momentary ON
/
Press and hold
Constant On
Long press for 0.5s
Double click
Cycle through (Click)
Low-High-Med-Strobe
Low-Med-High-Strobe
Turn off
Long press for 0.3s
Long press for 0.5s
Work at any mode over 60s then click
* Note:
1. The output will step down to 65 lumens in 2 minutes working on High
mode due to the heat the high mode produced, and the output will be
adjusted real time by the temperature controller.
2. 3 clicks from off to access the hidden ultra low mode (Nichia version).
Product Illustration
Front
Back
Back
V2
vv
On / Off
Torch body
Torch head for light outlet
Front View
Back View
Grooves
Micro USB Port
Lanyard Hole

Ready to go with what you can rely on!
Micro USB Charging Instructions
 Open the Micro USB cover and connect a cable to charge as shown
in the diagram below
 Charging indicator: Red is charging, Blue is fully charged
 Charging time: 45 minutes (350 mA / 5V)
 When the battery voltage is lower than 2.6V, the indicator will be ,
constantly on reminding to charge the light
 When the battery voltage is lower than 2.4V the light will stop working
How to open the Micro USB cover
Battery Replacement
The battery can only be replaced by a professional technician.
.
Warning!
 Do not look directly into the light when it is switched on.
 Do not point the light at human or animal eyes.
 Do not permit children to use the flashlight unsupervised.
Warranty Service
 Two year international warranty.
 After the free maintenance period has expired, the maintenance service will
charge for material expense only, free of labor expenses.
Runfree Equipment Technology (Hong Kong) Co., Limited
Website: www.rovyvon.com
E-mail: [e-mail]
Address: UNIT 04, 7/F, BRIGHT WAY TOWER, NO. 33 MONG KOK ROAD,
KOWLOON, HONGKONG.
Clip Instructions
The clip could be attached in the forward or backward position as your pr
eference
Note:
1. It is recommended to clip the torch at the designated grooves to av
oid the risks of no inaccessibility to the USB port or insecure grip.
2. Please fully recharge the flashlight first before you use it
3. This manual is for Aurora AX series,
A. Grooves for backward clip
A. Grooves for backward clip
B. Grooves for forward clip
B. Grooves for forward clip
A
B
1. Look on the edge of
the metal body where it
looks like a rubber hinge.
2. Grab the edge of that
little rubber tip with your nail.
3. Pull it up and the USB
cover will easily pop out.