RovyVon Hybrid Series User manual

Ready to Go with What You Can Rely On
Shenzhen Runfree Equipment Technology Co., Ltd.
Website: www.RovyVon.com Email: [e-mail]
Address: Rm. 702 Zongtai Future City, Bao’An, Shenzhen, China
Postal code: 518102 Te l: 86 755 2760 1970
v1
Hybrid Series H3 EDC Penlight User Manual
Features
1. Crafted from aerospace 6063 aluminum alloy
2. Alternative 6500K cool white LED or 5000K warm white high CRI LED
3. LOP (Light Orange Peel) reflector, smooth and eyes friendly beam
4. Hybrid battery supply - internal 300mAh Lipo battery & external (replaceable) AAA/10440 battery
5. USB-C rechargeable
6. Instant mode memory
7. Detachable deep carry stainless steel pocket clip included
8. IPX6 water resistance
Size: 133mm / 5.24” (L) * 16.5mm / 0.65” Weight: 49g / 1.73oz
Accessory: Pocket clip*1, USB-C cable*1, Charging port cover*1, O-ring*2, Lanyard*1, User manual*1, Warranty
card*1
Power supply switch
1. By default, it will use the external battery (Alkaline or Ni-MH AAA battery or 10440 Li-ion battery) once it was
installed.
2. By holding the side switch for 3 seconds, the power can be switched between internal battery and external
battery
a. If the external battery was used, it will be switched to the internal battery (Li-po) and the battery indicator
will show Blue to indicate it was switched successfully.
b. If the internal battery was used, it will be switched to the external battery and the battery indicator will show
Green to indicate it was switched successfully.
3. It will switch between automatically if the battery is low (Li-po / 10440 is lower than 3.0V or AAA battery is lower
than 0.8V).
4. It will fail to switch the power supply in the following cases
a. The board has issues like short circuit, etc.
b. Both batteries are low voltage.
Operation (Any button)
1. Moonlight: From off, single click, click again to turn off
2. Turn on: Rapid double click
3. Switch mode: click to cycle through moonlight-low-med-high
4. Emergency mode: rapid triple click, and click to cycle through Strobe-SOS-Signal beacon
5. Turn off: Press for 0.3 seconds
6. Memory mode: memorize the last used mode after turned off.
CREE LED
Specs
Battery
Moonlight
Low
Medium
High
Output
Li-po
0.5lm
20lm
200lm
500lm
AAA
0.1lm
15lm
60lm
100lm
Runtime
Li-po
54H
10H
90mins
40mins
AAA
20H
6H
2H
50mins
Intensity
Li-po
1200cd (max)
AAA
600cd (max)
Beam
Distance
Li-po
70m (max)
AAA
50m (max)
Impact resistance
1.5m
Waterproof
IPX6
Nichia LED
Specs
Battery
Moonlight
Low
Medium
High
Output
Li-po
0.5lm
15lm
160lm
400lm
AAA
0.1lm
10lm
60lm
120lm
Runtime
Li-po
56H
12H
100mins
45mins
AAA
24H
6H
2H
1H
Intensity
Li-po
900cd (max)
AAA
400cd (max)
Beam
Distance
Li-po
50m (max)
AAA
30m (max)
Impact resistance
1.5m
Waterproof
IPX6
*Parameters may vary from environment, using method, and flashlight.
**The data of the AAA battery tested with Eneloop Ni-MH rechargeable AAA battery.

Ready to Go with What You Can Rely On
Shenzhen Runfree Equipment Technology Co., Ltd.
Website: www.RovyVon.com Email: [e-mail]
Address: Rm. 702 Zongtai Future City, Bao’An, Shenzhen, China
Postal code: 518102 Te l: 86 755 2760 1970
v1
Graphic of CREE LED
0
100
200
300
400
500
600
Time
(min)
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34
Battery case installation
Output (Lumen) High Mode