Royal Sovereign ARP-1314 User manual

Royal Sovereign International, Inc
PORTABLE AIR CONDITIONER
ACONDICIONADOR DE AIRE PORTÁTIL
CONDITIONNE UR D' AIRE PORTABLE
Página en Español 17
Read and retain these instructions for future reference.
For any Customer Support needs, please choose the Support tab on
www.royalsovereign.com
ARP-1314
OWNER’S MANUAL
ARP-1314

PORTABLE AIR CONDITIONER
ARP-1314
INTRODUCTION
Thank you for choosing Royal Sovereign to provide you and your family with all of the “Home Comfort” requirements for your home, apartment,
or office. This Portable Air Conditioner can be set-up in just minutes and can be easily moved from room to room. It is a multi-functional room
air comfort system that offers you Air Conditioning, Dehumidification and Air Circulation modes. This manual will provide you with valuable
information necessary for the proper care and maintenance for your new appliance. Please take a few moments and read the instructions
thoroughly. If properly maintained, your appliance will give you many years of trouble-free operation.

Page
Precautions for use 4
Identification of parts 5
Installation instructions 6~7
Operation 8~11
Maintenance 12
Troubleshooting 13
Specifications 14
Warranty 15
Contact information 16
Página en Español 17
CONTENTS

4
PRECAUTIONS FOR USE
Electrical Specifications and Power Cord
Check to ensure that the electrical service being used is adequate for the model you’ve chosen. The electrical rating of your new air conditioner is
defined on the serial plate of the unit. Please refer to the rating when checking electrical requirements to ensure they meet the electrical codes of
your location.






qualified electrician install the proper outlet.

• Do not use this unit with any extension cords or adapter plugs.



General Use







ARP-1314
5
IDENTIFICATION OF PARTS
1. Control panel
2. Air outlet
3. Handle
4. Caster wheel
5. Upper Air Filter
6. Air intake
7. Air Outlet
8. Upper Drain Outlet
9. Air intake

11. Bottom tray drain outlet
12. Power cord outlet
AUTO
HEAT
COOL
DRY
FAN
MODE
ION
SLEEP
FAN
HI
MED
LOW
TIMERON
TIMEROFF
FC
SWING

6
INSTALLATION
Unpack your New Portable Air Conditioner and let the machine stand upright for 2 hours before starting.
Unpack all parts listed below. If any parts are missing do not return this product to the place of purchase.
Please visit our website www.royalsovereign.com and click on the “Support” tab.
Accessories Include

2. Hose connector
3. Hose adapter
4. Window slider
5. Foam seal
6. Drainage hose
7. Remote control
Part 1: Exhaust hose, connector and adapter




Fig 1.

ARP-1314
7
Part 2: Attaching exhaust hose
1. Connect the hose connector to the air outlet by aligning the tabs on the hose to the PAC and snap it into place.
Part 3: Installing window slider kit
1. Open the window and place the window slider on the inside edge of the window.
2. Adjust the window slider to the width of the window. For small width windows the inside slider may block the hole and need to be shortened using a plastic saw.
3. Insert a screw into the top of the window slider to secure it at the correct length.

outside.

6. Place window slider and hose into the edge of the window.
7. Close window to secure slider.
8. Cut the foam seal to the window width and stuff the foam seal between the glass and the window.
Fig 3. Fig 4.
Fig 2.

8
OPERATION
Before Use




1. Press the RESET button on the power cord.
2. Plug cord into an electrical outlet.
3. Press the TEST button on the power cord. The RESET button should pop up.
4. Press the RESET button for use.
5. Do not use the air conditioner if the test fails. The green light on the power cord will turn on if the plug is working properly.
Note: If you turn the air conditioner off and immediately restart it, allow 3 minutes for the compressor to restart cooling.
In the event of a power failure, wait 3 minutes before restarting unit.
Control Panel
Buttons
Power button Timer button
Sleep mode button Fan speed button
Mode button Swing button
Temperature / Timer up button
Temperature / Timer down button
AUTO COOL
DRY
FAN
MOD E
SLEEP
FAN
HI
MED
LOW
TIM E R ON
TIM E R OFF
FC
SWI N G

ARP-1314
9
Mode Descriptions


COOL mode

- Press the ADJUST buttons " " or " " to select your desired room temperature. The temperature can be set within a range of 62°F~88°F.
- Press the "FAN SPEED" button to choose the fan speed.
HEAT mode(Only for models with Heat function)
- Press the "MODE" button until the "HEAT" indicator light comes on.
- Press the ADJUST buttons " " or " " to select your desired room temperature. The temperature can be set within a range of 62°F~88°F.
- Press the "FAN SPEED" button to choose the fan speed. For some models, the fan speed can to cannot be adjusted under HEAT mode.
DRY mode


- Keep windows and doors closed for the best dehumidifying effect.

AUTO mode

temperature you have selected and the room temperature.
- The air conditioner will control room temperature automatically round the temperature point set by you.
- Under AUTO mode, you can not select the fan speed.
FAN mode
- Press the "MODE" button until the "FAN " indicator light comes on.
- Press the "FAN SPEED" button to choose the fan speed. The temperature cannot be adjusted.


TIMER operation
- When the unit is on, first press the Timer button, the TIMER OFF indicator light illuminates. It indicates the Auto Stop program is initiated.
- When the unit is off, first press the Timer button, the TIMER ON indicator light illuminates. It indicates the Auto Start program is initiated.

time remaining until start.
- The selected time will register in 5 seconds and the system will automatically revert back to display the previous temperature setting.


SLEEP operation


mode and the unit will continue to operate as originally programmed.
NOTE:
Auto-Restart(on some models)

Wait 3 minutes before resuming operation
After the unit has stopped, it cannot restart operation in the first 3 minutes. This is to protect the unit. Operation will automatically start after 3 minutes.
Air flow direction adjustment
The louver moves up at a 6° angle each time the SWING button is pressed until it moves to a position which would affect the cooling or heating effect of the air conditioner, it will
automatically change the swing direction.
If the SWING button is pressed for more than 2 seconds, the auto swing feature is activated.