Royalcraft Faro User manual

Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd. 2 / 2
www.ro
y
alcraft.co.uk
Before you start
Warnings
Dos
Don’ts
The Chairs are be stacked as per below
diagrams when the Chairs are not in use.
PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
Faro 7pcs Black Rectangle Dining Set - Chair
Assembly Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
This product is intended for domestic use only.
Ensure the product is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on a
suitable surface to prevent scratching your product.
Check all contents are present prior to assembly as per the parts
list provided. In the event of problems or missing parts, please
contact the seller.
Check all screws and bolts are tightened and inspect regularly.
Cover furniture when not in use to add additional protection to your
product.
Store all cushions indoors after use as they are not waterproof.
During severe weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
To best preserve this product, please use a protective cover when
your furniture is not in use. This will help prevent harmful UV rays
from damaging and discolouring the material.
Ensure that the product is clean and dry before storage.
Clean your product with a sponge and warm soapy water then wipe
with a clean, dry cloth.
Cushions should be cleaned following the care instruction on
the label.
Where instructions as to the; storage, commissioning, installation,
use and maintenance of the goods or (if there is none) good trade
practice are not followed and a defect arises this will void the
12 month manufacturer's guarantee on the product.
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since these
substances can damage the product.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.