Royalcraft FARO-04 User manual

ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 2 / 10
www.royalcraft.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE
REFERENCE
READ CAREFULLY
See enclosed instructions for safety and care
information.
Failure to follow the warnings could result in serious
injury.
Handle heavy parts with care.
This product is intended for Domestic Use only.
This product should only be used on firm, level
ground.
Ensure the product is always placed on level
ground.
Furniture can be dangerous if used incorrectly or
maintained poorly. Keep your furniture in a good
condition at all times. No liability will be accepted for
damage or injury caused by failure to follow the care
and maintenance guidelines.
Dos
Unwrap all packaging materials and place the
components on suitable surface to prevent
scratching your product.
We recommend the use of furniture covers to
protect your product when not in use.
Cushions should be cleaned following the care
instruction on the label.
If the set is stored outside then we recommend that
cushions are brought inside for storage and
protection.
To clean the product, a pressure washer or jet wash
on a wide spray can be used at a minimum distance
of 1m from the product. Do not aim this directly at
the joints of the furniture. Alternatively it can simply
be wiped down by hand with a damp sponge and a
weak solution of soap and water.
We would recommend lifting the products to move the
items instead of dragging them which may cause
some damage to either the product or the area in
which you choose to use them.
Don’ts
Never drag furniture when moving it, always lift it.
Never tilt the product use.
Do not stand or climb onto the product.
Do not sit or lean onto the arms/rims of this product.
Never use scourers, abrasives or chemical cleaner.
Number of people required for assembly
Two people
Time to assemble
50 Minutes
Tools required
(Rubber Hammer may be required, not provided)
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

ProducedinChinaforAMir&Co.,Ltd.
© A Mir & Co., Ltd. 3 / 10
www.royalcraft.co.uk
Please find the member parts.
Member Part
Part No. Diagram Name Qty.
MP1 Coffee Table 1 PC
MP2 Arm Chair 2 PCS
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 4 / 10
www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Coffee Table Leg
2 PCS A1
Coffee Table Leg
2 PCS
C
Coffee Table Top
1PC D1
Coffee Table
Connecting Ring
1 PC
RS
Right Leg
2 PCS LS
Left Leg
2 PCS
D
Box Bottom Panel
2 PCS R
Box Rear Panel
2 PCS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
0
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 5 / 10
www.royalcraft.co.uk
F
Box Front Panel
2 PCS H
Connecting Bar for
Backrest
2 PCS
BC
Front Panel for Backrest
2 PCS B
Rear Panel for
Backrest
2 PCS
S
Seat Panel
2 PCS O
Bolt
28 PCS
P
Cap
4 PCS Q
Spanner
1 PC
T
Cushion (Op�onal)
2 PCS
Step by step assembly instructions
Faro 4pcs Conversation Set
-Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 6 / 10
www.royalcraft.co.uk
MP1 – Coffee Table
Step One
Attach Coffee Table Legs (A) and (A1) to the Connecting Ring (D1).
Step Two
Attach the above partly-assembled parts to the Coffee Table Top (C).
Place the Coffee Table in the upright position.
Your Coffee Table is now ready for use.
AD1 A1
A1 A
C
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 7 / 10
www.royalcraft.co.uk
MP2 – Arm Chair
Step One
Attach Box Front Panel (F) and Box Rear Panel (R)
to Box Bottom Panel (D).
Step Two
Attach the Front Panel for Backrest (BC) to the Connecting Bar for Backrest (H) using Bolts (O),
cover the hole with Caps (P).
H
BC
O
P
D
F
R
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 8 / 10
www.royalcraft.co.uk
Step Three
Attach components assembled in Step Two to the Box Rear Panel (R).
Step Four
Attach Right Leg (RS) to the above components using Bolts (O).
6 Bolts are used in this Step.
RS
O
BC
H
R
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 9 / 10
www.royalcraft.co.uk
Step Five
Attach Left Leg (LS) to the above components using Bolts (O).
6 Bolts are used in this Step.
Step Six
Attach Rear Panel for Backrest (B) to the abaove components.
B
LS
O
Faro 4pcs Conversation Set
- Arm Chair and Coffee Table
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 10 / 10
www.royalcraft.co.uk
Step Seven
Attach Seat Panel (S) to the above components. Your Arm Chair is ready for use.
Step Eight
Please note the cushions are Optional Parts. If your model is equipped with Cushion, just place
the Cushion (T) to the seat.
Never tilt the products during use.
Ensure the product is always placed firmly on the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
S
T
Faro 4pcs Conversation Set
-Arm Chair and Coffee Table
Assembly Instructions