RSA Lighting QCM506SPMH User manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
7.25”
12.00”
13.00”
8.18”
4.63”
Ceiling
Cut-Out
3.641”dia.
4.63”
Ceiling thickness must be specified
A...Housing
Housing and plaster frame: 18 gauge CRS
with flat black powder coated internal
finish. Plasterframe opening collar is built
to accommodate a pre-specified ceiling
thickness.
B ...System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture.
Vent holes in housing provide cooler
operation.
C ...Electrical
Integral j-box and metal halide ballast.
120V input. Junction box is U.L. listed for
through branch wiring. Includes five 1/2
trade size knockouts.
D...Lamp
CMH MR16 20W or ES16 BriteSpot
39W (not included). Internal rotation ring
with locking adjustment. Provides 360º
rotation of trim and secures original trim
position after relamping. Not available
for ceilings greater than 1” thick. GX10
twist-lock lamp socket.
E ...Mounting
Hanger Bars and Butterfly Brackets
included for residential and commercial
applications respectively.
Ceiling Cut-Out: 3.641” dia.
MINI
QUIET CEILING
TRIMLESS
QCM506SPMH
New Construction
Housing for
Round Trim
Special Ceiling
Materials
(non-drywall ceilings)
FOR CMH MR16 20W
or ES16 BriteSpot 39W
ORDERING INFORMATION
Housing
QCM506SPMH =
Mini Quiet Ceiling
New Construction Housing
for non-drywall ceilings
for Round Trim
w/ Integral Ballast
New construction special ceiling housing for Mini Quiet Ceiling small
aperture round trimless fixtures. (QCM5001, QCM5002, QCM5003,
QCM5004).
For new construction non-I.C applications in non-drywall ceilings
constructed of special materials such as wood, marble, etc.... Insulation
must be kept 3” from all sides and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX [phone]
QCM506SPMH
Cut-out in ceiling material must be
sized perfectly to the diameter of the
plasterframe collar for trimless effect.
Ceiling Thickness
Specify exact thickness in inches.
1/8” Increments.
Examples: 0.500”, 0.625”, 0.750”, 0.875”
Ceiling Material
Voltage
120 =120 volts primary
277 =277 volts primary*
*Consult factory for 277V ballast availability.
Metal Halide Ballast
20 =CMH MR16 20W
39 =ES16 BriteSpot 39W
rev. 091806