RTP Outdoors 6 Crimpers User manual

OWNER'S MANUAL
For Model: 6',8',10.5' Crimpers
Goliath Crimper Rollers

1
Model Specification
B
A
Drum Width(A) Length(B) Height Depth
6' 72" 76.9" 36.1" 35.9" 1158 lbs
8' 96" 100.7" 36.1" 35.9" 1445 lbs
10.5' 126" 130.7" 36.1" 35.9" 1820 lbs
PS. 75 lbs per foot when filling with water.
Main Dimension
Model
Approx. weight

SAFETY INTRODUCTION
2
WARNING: Indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury, and includes hazards that are exposed
when guards are removed. It may also be used to alert against unsafe
practices.
CAUTION: Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe
practices.
This entire manual is filled with important safety information. Please read
it carefully.
DANGER: Indicates an imminently hazardous situation that, if not avoided, will
result in death or serious injury. This signal word is to be limited to the most
extreme situations typically for machine components which, for functional
purposes, cannot be guarded.
You will find important safety information in the following form:
These signal words mean:
Your safety, and the safety of others, is very important. To help you make
informed decisions about safety, we have provided operating procedures and
other information in this manual. This information alerts you to potential
hazards that could hurt you or others.
Safety Messages – preceded by a safety alert symbol and one of three
signal words: DANGER, WARNING, or CAUTION.

OPERATIONS AND MAINTENENCE
3
CAUTION: Make sure to drain water out each time to prevent corrosion and to
prevent from freezing and busting.
CAUTION: Do not stand or climb on equipment.
WARNING: Keep bystander clear while operating equipment.
WARNING: Do not allow riders.
CAUTION: Safely support and secure implement before making repairs.
CAUTION: Operator should be familiar with all functions of the unit.
This safety alert symbol is used to indicate safety instructions.
property damage. Read and follow all instruction in the manual.
CAUTION: Do not allow anyone to operate this equipment who has not fully
read and comprehended the safety manual and who has not been properly
trained in operation of the equipment.
Follow these instructions to avoid personal injury and/or
A.USING THE TOOL
This tool is ground driven and is pulled or pushed by a tractor.
CAUTION: Care should be taken when either use or transport.
B.MAINTENANCE
There are two grease points on both end of the drum. It is recommended that
these bearings be greased before every using. In dusty conditions more
frequent greasing may be necessary.

Weed Guard
Roller Drum
Main Frame
Nut
(for filling water
into the drum)
3-Hole Plate
(for installing on Tractors)
Stand
Cover crop roller description
4

OPERATIONS AND MAINTENENCE
5
How to disassemble to grease?
Step 1: Place the tool on an even ground,
ensure the (2) support function correctly.
Step 2: Grease the bearing from the nipple on
both sides of the crimpers.

6
MODEL PARTS
ITEM Part # Description Quantity
1 600-0001-01 Main Frame Assembly 1
2 600-0002-01 Roller Drum 1
3 600-0001-02 BallBearing 2
4 600-0001-04 Weed Guard 2
5 600-0001-05 Flat Washer 16
6 600-0001-06 Bolt 8
7 600-0001-07 Nut for bearings 8
8 600-0002-02 Nut on Drum 2
9 600-0002-03 Rubber washer for drum 2
10 600-0001-03 Stand 2
11 600-0001-08 Top Pin for 3 holes 1
12 600-0001-09 Lower Pin for 3 holes 2
13 600-0001-10 Pin for Stand 2
14 600-0001-11 Lock pin 5
15 600-0003-01 *Replacement blade (Pair) 10
ITEM Part # Description Quantity
1 800-0001-01 Main Frame Assembly 1
2 800-0002-01 Roller Drum 1
3 600-0001-02 BallBearing 2
4 600-0001-04 Weed Guard 2
5 600-0001-05 Flat Washer 16
6 600-0001-06 Bolt 8
7 600-0001-07 Nut for bearings 8
8 600-0002-02 Nut on Drum 2
9 600-0002-03 Rubber washer for drum 2
10 600-0001-03 Stand 2
11 600-0001-08 Top Pin for 3 holes 1
12 600-0001-09 Lower Pin for 3 holes 2
13 600-0001-10 Pin for Stand 2
14 600-0001-11 Lock pin 5
15 800-0003-01 *Replacement blade (Pair) 10
For 6's Model
For 8's Model

7
MODEL PARTS
ITEM Part # Description Quantity
1 105-0001-01 Main Frame Assembly 1
2 105-0002-01 Roller Drum 1
3 600-0001-02 BallBearing 2
4 600-0001-04 Weed Guard 2
5 600-0001-05 Flat Washer 16
6 600-0001-06 Bolt 8
7 600-0001-07 Nut for bearings 8
8 600-0002-02 Nut on Drum 2
9 600-0002-03 Rubber washer for drum 2
10 600-0001-03 Stand 2
11 600-0001-08 Top Pin for 3 holes 1
12 600-0001-09 Lower Pin for 3 holes 2
13 600-0001-10 Pin for Stand 2
14 600-0001-11 Lock pin 5
15 105-0003-01 *Replacement blade (Pair) 10
For 10.5's Model
*Optional part: Replacement blades 10 pairs.
PS. the replacement blades can be applied on the worn out blades,
call the seller for the prices and details.
15

8
MODEL PARTS
1
2
3
4
5
6
7
8
9
11
14
10
13
12