RuiDa RDC6585G User manual

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
RDC6585G
Control System Manual V1.0
Read this manual before operation
The content include of electric connections and operating steps
Read the manual to operate the systems
RuiDa Technology Co., Ltd
Addr: 202-203,B-Block,Technology Building,NO.,1057 Nanhai
Avenue,Nanshan District,Shenzhen city,Guangdong
Province,P.R.China
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.rd-acs.com
https://www.ruidacontroller.com

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
COPYRIGHT
All rights reserved.You may not reproduce, transmit, store
in a retrieval system or adapt thispublication, in any form or by
any means, without the prior written permissionof RuiDa,
except as allowed under applicable copyright laws. We have
identifiedwords that we consider as trademarks. Neither the
presence or absence oftrademark identifications affects the
legal status of any trademarks.

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
CERTIFICATION
DECLARATION
CE
The product has been certified by the CE (Commutate European) safety certification.
It has passed the corresponding conformity assessment procedure and the
manufacturer's declaration of conformity, in accordance with the relevant EU
directive.
ROHS
This product has been certified by EU legislation (Restriction of Hazardous
Substances) Safety certification; comply with relevant EU environmental regulations.
FCC
This product has been certified by the Federal Communications Commission for
safety, Comply with us electronic safety regulations.

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
SAFETY INFORMATION
When using this system, please make sure the operation is correct and the usage is
safe. Some signs or text will be used to remind you to pay attention to the dangerous
matters and some important information.
Dangerous：
Indicates a serious danger. In the process of use, if the operation is
improper or the way of use is wrong, it may cause serious injury or
even death to the user. Please do not operate it easily until you have
made sure that the operation method is correct and the way of use
is correct.
Warning：
Danger.n the process of use, if the operation is improper or the use
is wrong, which may lead to the injury of the personnel, please do
not operate the personnel and related personnel easily, until ensure
the correct operation method and use method is correct before use.
Cautious：
Represents the potential risk of the product. In the process of use,
if the use method is wrong or improper operation, it may cause
damage to the product or some parts. Please do not use it until you
have made sure that the operation method is correct and the usage
is correct.
Important：
Represents important information to be paid attention to during the
use of the product.Please do not ignore this information, this
information will provide effective operational help.
This sign indicates laser radiation, which is usually posted on
products with laser output. Please be careful with laser and pay
attention to safety when using this kind of equipment.

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
Sign in、Devanning、Examine cargo
The product itself with plastic or metal shell, can protect the external electrical
components from damage. The products are packed in foam bags and anti-static bags.
If there is any external damage to the package, check the equipment and notify the
carrier and carrier in writing of the damage.
Inportant:
After receiving the product, please check whether the outer package is
intact, check whether the product is complete after unpacking and
whether all parts are intact. If any damage is found, please contact
ruida immediately.
Remove all cargo from package and keep packing material and wiring parts. Please
take care of the safety of the goods when unpacking them.After taking out the goods,
please check whether the parts are complete and intact. If any missing parts or
damaged parts are found, please contact ruida technology immediately.Do not install
or debug the equipment if any obvious damage is found.

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
Contents
Section 1 Overview.......................................................................................................................................1
1.1 Briefing............................................................................................................................................... 2
1.2 Description of Controller Model........................................................................................................ 2
1.3 Comparison of Controller Performance.............................................................................................3
Section 2 Installation Size............................................................................................................................ 5
2.1 Installation Size of MainBoard........................................................................................................... 6
2.2 Size of Panel........................................................................................................................................7
Section 3 Object Pictures and Interfaces.....................................................................................................8
3.1 Object Pictures of MainBoard............................................................................................................9
3.2 Object Pictures of Panel...................................................................................................................10
3.3 Electric connection...........................................................................................................................11
3.4 Lamp instruction.............................................................................................................................. 12
3.5 Function distribution of all eight axes............................................................................................. 13
Section 4 Description of Interface Signal for MainBoard..........................................................................14
4.1 Interface of Main Power Source CN0...............................................................................................15
4.2 Panel Signal-Cable Interface HMI.....................................................................................................15
4.3 Udisk Interface................................................................................................................................. 15
4.4 PC-USB Interface.............................................................................................................................. 15
4.5 Ethernet Interface............................................................................................................................ 15
4.6 Extended Equipment Interface CN1................................................................................................ 15
4.7 Output Port CN2/CN3...................................................................................................................... 16
4.8 Input Port CN4..................................................................................................................................17
4.9 8-axle Spacing Input Interface......................................................................................................... 17
4.10 X~D axle Motor Driver Interface AXIS_X~AXIS_D..........................................................................18
4.11 Laser Power Control Interface LP1~LP6.........................................................................................19
Section 5 Examples of Laser Power Interface............................................................................................20
5.1 Brief.................................................................................................................................................. 21
5.2 Examples of Glass tube Laser Power............................................................................................... 22
5.3 Examples of RF-Laser....................................................................................................................... 23
Section 6 Examples of Driver Interface for Step-servo Motor.................................................................. 24
6.1 Brief.................................................................................................................................................. 25
6.2 Examples of Motor Driver Connection............................................................................................ 26
Section 7 Examples of Extended Equipment Interface............................................................................. 27
7.1 Examples of Extended Equipment Interface....................................................................................28
Section 8 Operating Instruction of Panel...................................................................................................30
8.1 Brief.................................................................................................................................................. 31
8.1.1 Overview................................................................................................................................... 31
8.1.2 Introduction to the Keys........................................................................................................... 31
8.1.3 The main interface.................................................................................................................... 33
8.2 Speed Setting................................................................................................................................... 34

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
8.3 Max/Min Power Setting................................................................................................................... 34
8.4 Set the layer parameters..................................................................................................................35
8.5 Menu Function................................................................................................................................. 36
8.5.1 User parameters........................................................................................................................36
8.5.2 Vender parameters................................................................................................................... 39
8.5.3 Origin Setting.............................................................................................................................40
8.5.4 Backup parameters................................................................................................................... 42
8.5.5 Restore parameters...................................................................................................................42
8.6 Controller setting............................................................................................................................. 42
8.6.1 Language................................................................................................................................... 43
8.6.2 Screen origin............................................................................................................................. 43
8.6.3 Wireless panel...........................................................................................................................44
8.6.4 IP Setting................................................................................................................................... 45
8.6.5 System Info................................................................................................................................45
8.7 Funtions............................................................................................................................................46
8.7.1 Axis reset................................................................................................................................... 46
8.7.2 Keyboard lock............................................................................................................................47
8.7.3 Manual setting.......................................................................................................................... 48
8.7.4 Laser Setting..............................................................................................................................48
8.7.5 Diagnose....................................................................................................................................49
8.7.6 Laser power infomation............................................................................................................50
8.8 File Management............................................................................................................................. 51
8.8.1 Memory File.............................................................................................................................. 51
8.8.2 Memory operation....................................................................................................................52
8.8.3 Format memery........................................................................................................................ 53
8.8.4 U disk file...................................................................................................................................54
8.9 Password input and settings............................................................................................................ 54
8.9.1 Password Input..........................................................................................................................54
8.9.2 Password Setting.......................................................................................................................55
8.10 Prompt and alarm information......................................................................................................56
Section 9 Manufacturer/User Parameters Explanation............................................................................ 57
9.1 Manufacturer parameters................................................................................................................58
9.2 User parameters...............................................................................................................................62

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
1
Section 1 Overview
CONTENTS:
Briefing
Description of Controller Model
Comparison of Controller Performance

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
2
1.1 Briefing
RDC6585G system is a new generation system for control of laser engraving and cutting, which is
developed by RD Co., Ltd. In addition to high hardware stability, high voltage or static electricity
rejection, and friendly 5’’ TFT man-machine display. This system is provided with stronger
software function including perfect 8-axle motion control function, large-capacity file storage,
six-channel adjustable digits laser power control interface, USB driver of stronger compatibility,
multi-channel general/special IO control, and, this system can communicate with PC by USB2.0 or
Ethernet, and the communication mode is automatically checked by the system. And, it have two
extended RS232 ports, which can expediently communicate with other extended equipments.
This RDC6585G system can drive single or multi-belt 2/4/6 roboticized X axes, and it supports
utmost eight axes, six laser channels.
1.2 Description of Controller Model

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
3
1.3 Comparison of Controller Performance
RDC6332G
RDC6342G
RDC644XG
RDC6585G
Power
Feature
Only one-way 24V
Only one-way 24V
Only one-way 24V
Only one-way 24V
Laser Port
Feature
Two-way digits and
two-way analog port,
settable independently
and non-interacted
Two-way digits and
two-way analog port,
settable independently
and non-interacted
Two-way digits port,
settable independently
and non-interacted
Six-way digits port,
settable independently
and non-interacted
USB
Feature
Copying
Speed
High
High
Very High
Very High
Compatibility
Support all USB disks
with different capacities
Support all USB disks
with different capacities
Support all USB disks
with different capacities
Support all USB disks
with different capacities
Memory
Feature
Capacity
256M
256M
128M
256M
Fault
Tolerance
Capable of checking
defective track and
formatting and good in
fault tolerance
Capable of checking
defective track and
formatting and good in
fault tolerance
Capable of checking
defective track and
formatting and good in
fault tolerance
Capable of checking
defective track and
formatting and good in
fault tolerance
General IO
Feature
Input Port
4 ways (two for general,
two for specialties)
4 ways (two for general,
two for specialties)
4 ways (two for general,
two for specialties)
Multi-ways dedicated
inputs and two ways
reserved inputs
Output Port
4-ways (500mA high
current for each, OC
output, no reverse
current protection)
4-ways (500mA high
current for each, OC
output, no reverse
current protection)
4-ways (500mA high
current for each, OC
output, reverse current
protection included)
Multi-ways dedicated
outputs and four ways
reserved outputs.
(500mA high current for
each, OC output,
reverse current
protection included)
Software
Feature
Power-off
restart for
Engraving
YES
YES
YES
YES
Multi-origin
Logics
YES
YES
YES
YES
Parameter
Backup
Logics
YES
YES
YES
YES
Work time
Preview
YES (the work time
accurate to 1ms)
YES (the work time
accurate to 1ms)
YES (the work time
accurate to 1ms)
YES (the work time
accurate to 1ms)
Online Update
Mainboard
Program
YES
YES
YES
YES
Display
Feature
Online
Modification
Laser
Power/Speed
YES
YES
YES
YES
Offline
Modification
Layer
parameters
YES
YES
YES
YES
Online Update
Startup
Display
YES
YES
NO
NO

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
4
File
dynamic/static
preview
YES
YES
YES
YES
Run progress
bar display
NO
NO
YES
YES
Modification
Factory/User’s
para on
display
YES
YES
NO
NO
Display type
320*240 TFT display
320*240 TFT display
320*480 TFT display
320*480 TFT display
Motion-axl
e Feature
Soft Spacing
YES
YES
YES
YES
Hard Spacing
YES
YES
YES
YES
Z-axle
Linkage
YES
YES
YES
YES
Feeding
Feature
Single/double direction
for option
Single/double direction
for option
Single/double direction
for option
Single/double direction
for option
Power-on
Resetting
Configurable for each
axes
Configurable for each
axes
Configurable for each
axes
Configurable for each
axes
Key Speed
Configurable
Configurable
Configurable
Configurable
Axles
3 (Z axes is
configurable to flat or
feedin axes ）
3 (Z axes is
configurable to flat or
feedin axes ）
4
8
Robotizatio
n Multi-X
axes
Support
NO
2
2
2/4/6
Belt of
Multi-X
axes
NO
Single Belt
Single Belt
Single or Multi-
Belt
Encryption
Feature
Realtime clock and
battery integrated for
hardware encryption
Realtime clock and
battery integrated for
hardware encryption
No realtime clock, but
encryption included
No realtime clock, but
encryption included
Communic
ate
Mode
10/100MHZ Ethernet or
USB2.0
10/100MHZ Ethernet or
USB2.0
10/100MHZ Ethernet or
USB2.0, communication
mode is automatically
checked
10/100MHZ Ethernet or
USB2.0,
communication mode is
automatically checked
Extended
Communic
ation Ports
One way
For wireless handset
One way
For wireless handset
One way
For wireless handset or
EPLC400
Two ways
For wireless handset,
EPLC400 or other
equipment
Phone App
Support
NO
NO
YES
YES

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
5
Section 2 Installation
Size
CONTENTS:
Installation Size of MainBoard
Size of Panel

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
6
2.1 Installation Size of MainBoard
The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm (the four holes are
symmetrical)
Figure

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
7
2.2 Size of Panel
The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm.
Figure
2.2-1

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
8
Section3 Object
Pictures and Interfaces
CONTENTS:
Object Pictures of MainBoard
Object Pictures of Panel
Electric connection
Lamp instruction
Function distribution of all eight axes

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
9
3.1 Object Pictures of MainBoard
For more detailed pin description, see the Chapter 4: Description of Interface
Signal for MainBoard.
Figure: 3.1-1 Object Picture of MainBoard

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
10
3.2 Object Pictures of Panel
Figure: 3.2-1 Object Picture of Panel

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
11
3.3 Electric connection
Figure 3.3-1 electric connection

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
12
3.4 Lamp instruction
RDC6585G have thirty three red lamps:
LED NUMBER
NAME
SENSE
LED1
LmtX-
Xnegative limit indicator
LED2
LmtX+
Xpositive limit
LED3
LmtY-
Ynegative limit
LED4
LmtY+
Ypositive limit
LED5
LmtZ-
Znegative limit
LED6
LmtZ+
Zpositive limit
LED7
LmtU-
Unegative limit
LED8
LmtU+
Upositive limit
LED9
LmtA-
Anegative limit
LED10
LmtA+
Apositive limit
LED11
LmtB-
Bnegative limit
LED12
LmtB+
Bpositive limit
LED13
LmtC-
Cnegative limit
LED14
LmtC+
Cpositive limit
LED15
LmtD-
Unegative limit
LED16
LmtD+
Upositive limit
LED17
Wp1
the first water protection
LED18
Wp2
the second water protection
LED19
Wp3
the third water protection
LED20
Wp4
the fourth water protection
LED21
Wp5
the fifth water protection
LED22
Wp6
the sixth water protection
LED23
Lon1
the first Laser Splash
LED24
Lon2
the second Laser Splash
LED25
Lon3
the third Laser Splash
LED26
Lon4
the fourth Laser Splash
LED27
Lon5
the fifth Laser Splash
LED28
Lon6
the sixth Laser Splash
LED29
Act
Ethernet communication
LED30
Link
Ethernet connection
LED31
Err
error in controller hardware
LED32
Run
the normal running status
LED33
+5V
+5V power supply

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY
13
3.5 Function distribution of all eight axes
The function distribution of all eight axes is as below:
Single
Roboticized X
axes
Double Roboticized X
axes
Quaternion
Roboticized X axes
Hexad Roboticized X
axes
X
Axes
Used to control the
left and right
moving or laser
header
Used to control the left
and right moving or the
first laser header
Used to control the
left and right moving
or the first laser
header
Used to control the left
and right moving or the
first laser header
Y
Axes
Used to control the
up and down
moving or laser
header
Used to control the up
and down moving or laser
header
Used to control the up
and down moving or
laser header
Used to control the up
and down moving or laser
header
Z
Axes
May be mapped to
put up and down
axes in Layer
parameter in PC
software
Used to control the left
and right moving or the
second laser header
Used to control the
left and right moving
or the second laser
header
Used to control the left
and right moving or the
second laser header
U
Axes
Used to control feed
in Axes
Used to control feed in
Axes
Used to control feed
in Axes
Used to control feed in
Axes
A
Axes
May be mapped to
put up and down
axes in Layer
parameter in PC
software
May be mapped to put up
and down axes in Layer
parameter in PC software
Used to control the
left and right moving
or the third laser
header
Used to control the left
and right moving or the
third laser header
B
Axes
May be mapped to
put up and down
axes in Layer
parameter in PC
software
May be mapped to put up
and down axes in Layer
parameter in PC software
Used to control the
left and right moving
or the fourth laser
header
Used to control the left
and right moving or the
fourth laser header
C
Axes
Used to Rotating
Cut
Used to Rotating Cut
Used to Rotating Cut
Used to control the left
and right moving or the
fifth laser header
D
Axes
Used to Auto-Focus
Used to Auto-Focus
Used to Auto-Focus
Used to control the left
and right moving or the
sixth laser header