Russell Hobbs Aura 19005-56 Installation guide

INSTRUCTIONS AND WARRANTY
MODEL NO. 19005-56
AURA 750W FOOD PROCESSOR

Congratulations on purchasing our Russell Hobbs Aura 750W Food Processor. Each
unit has been manufactured to ensure safety, reliability and ease of use. Before use,
please read these instructions carefully and keep them for further reference.
FEATURES OF THE RUSSELL HOBBS AURA 750W FOOD PROCESSOR
750W at maximum load
Includes stainless steel chopping blades, slicing / grating disc, dough tool and
creamer.
Chop, blend, shred, slice, whip up and mix ingredients in one unit to the exact
consistency you need at the touch of a button
Includes coffee and spice grinder for tougher ingredients like coffee beans, nuts and
spices.
1.5L usable capacity bowl for food processing
1.5L plastic jug blender for blending fruits, soups, smoothies and much more
2 speed settings and pulse
Double safety lock on bowl
Cord storage
Non slip feet for added stability
Dishwasher safe bowl and parts
For domestic use only
1 year warranty
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. Read all instructions and save the instructions provided with this appliance.
2. Do not put the motor unit in water or any other liquid; do not use it in a bathroom or
near any source of water.
3. Do not use outdoors.
4. The unit must be used only by a responsible adult.
5. Switch OFF and unplug the unit from the main power supply outlet before dismantling
or cleaning.
6. Turn the switch to standby “0” / “OFF” before fitting/ removing the jug/bowl to/ from
the motor/ base unit.

7. Turn the switch to standby “0” / “OFF” and wait until the blades come to a complete
stop before removing the lid from the jug/bowl, and before removing the jug/bowl from
the motor/ base unit.
8. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
9. Children should be supervised to ensure that they do not play with the appliance.
10. Do not use the unit without first locking the lid in place.
11. Do not fill the jug/bowl with boiling liquids. Allow liquids to cool to a lukewarm
temperature before you put them in the jug/bowl. This type of temperature would be
comfortable to the touch.
12. Do not put your hand into the jug/bowl, even when they have been removed
for cleaning –the blades are very sharp.
13. Do not come into contact with moving parts.
14. Do not put any other object (spoon, spatula, etc.) into the jug/bowl while the unit
is plugged in.
15. Do not leave the unit unattended when plugged in.
16. Misuse of this appliance can result in injury.
17. Position the motor unit on a dry, firm, level surface, close to a power socket
and out of reach of children.
18. Route the mains lead so that it cannot be caught accidentally or tripped over.
19. Keep the unit and the mains lead away from hotplates, hobs and burners.
20. Store the unit away from direct sunlight and fluorescent light where
possible.
21. Do not let the jug/bowl overflow. If liquid gets under the motor unit, it
may be sucked into the motor, damaging it.
22. Do not fill the jug/bowl above the MAX mark. If you do, the contents may
force the lid off when you start the motor.
23. The unit is equipped with a powerful motor and therefore processes very
quickly. Due to its efficiency there is no need to run the motor for more than 2
minutes at a time.
24. Do not run the motor for more than 2 minutes, either continuously, or using
the pulse setting, otherwise it may overheat. After 2 minutes of use, switch it
off for at least 2 minutes allowing it to cool to room temperature and allowing it

recover.
25. Do not use the unit for any purpose other than those described in these
instructions.
26. Do not run the unit empty, as it may overheat.
27. Do not operate the unit after it malfunctions. If the mains lead or plug is
damaged, return the unit to the manufacturer in order to avoid any hazard.
28. Children should be supervised to ensure that they do not play with the appliance.
29. Always turn the power off at the power outlet before you remove the plug.
Remove by grasping the plug. Do not pull on the electrical cord.
30. This appliance is designed for processing household quantities; it is not
suitable for commercial purposes. Use the appliance only for the purpose it
was designed for.
31. Do not use this appliance if it or parts of it show visible damage or if the
appliance has been dropped.
32. Do not attempt to make any modifications to this appliance.
33. To avoid any risk and to remain within warranty, repairs to this appliance
must be carried out by an authorised service agent only.
34. To reduce the risk of injury, never place the blade assembly on the base
without the jar properly attached.
35. If the supply cord is damaged, it must be replaced by the manufacturer, its
authorised service agent or similarly qualified persons in order to avoid any
hazard.
36. Switch off the appliance and disconnect from the power supply before
changing accessories or approaching parts that move when in use.
37. Use only accessories provided by the manufacturer for this appliance.
38. Do not run this appliance with an external timer or remote control system.

PARTS DIAGRAM
0,1,2,3: speed control dial
11: creamer
19: fine grater
4: motor unit
12: tab
20: bottom of disc
5: spindle
13: food processor bowl lid
21: blade unit
6: blender jug
14: feed chute
22: seal
7: blender jug handle
15: pusher
23: cap
8: removable drive attachment
16: disc
24: grinder
9: dough tool
17: slicer
10: stainless steel chopping
blade
18: coarse grater

BEFORE FIRST USE
Before using your appliance for the first time take it out of the box and take off any
protective wrappings. REMEMBER: DO NOT LEAVE PROTECTIVE PACKAGING LYING
AROUND, AS IT COULD BE DANGEROUS AROUND INFANTS. Wash the bowl, jug,
lid and cap in warm soapy water, rinse well and dry. NOTE: The blades are sharp,
handle with care.
OPERATING INSTRUCTIONS
SWITCH ON
Place the motor unit on a dry, firm, level surface, near a power socket.
Check that the speed control is set to 0.
Put the plug into the power socket.
SPEED CONTROL
Turn the speed control to the speed you want (1 = low, 2 = high). Turn the speed
control back to 0 to turn the motor off.
Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest
longer timings and slower speeds.
Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings
and higher speeds.
Do not run the motor for more than 1 minute, or it may overheat. After 1 minute, switch
off for at least 2 minutes, to let the motor cool.
PULSE
Turning the speed control anti-clockwise will give you a short burst at high speed. In
this direction, the knob is spring-loaded. When you let go, it will return to 0.
USING THE BLENDER
Align the “arrow” on the bottom of the blender jug with the “open lock” on the motor
unit.
Lower the jug onto the motor body, then turn the jug to align the “arrow” with the
“closed lock”.
Pull the lever to open the lid.
Put the ingredients into the jug.

Do not fill past the 1500ml mark. If you do, the contents may force the lid off when you
start the motor. Close the lid.
Align the slots on the cap with the slots in the hole, fit the cap, and turn it clockwise to
lock it.
To add ingredients while the blender is working, remove the cap, pour the ingredients
through the hole, then replace the cap.
Check that the added ingredients do not push the volume in the jug past the 1500ml
mark.
USING THE PROCESSOR
Switch the appliance off (0) and unplug it.
Fit the spindle to the top of the motor unit.
Align the “arrow” on the bottom of the bowl with the “open lock” on the motor unit.
Lower the bowl on to the motor unit, then turn the bowl to align the “arrow” with the
“closed lock”.
Turn the lid to bring the “arrow” on the lid over the “open lock” on the bowl, and lift the
lid off. Choose the attachment you need.
CHOOSING THE RIGHT ATTACHMENT
Use the stainless steel chopping blade to pulverize ingredients.
Use the dough tool to mix ingredients together.
Use the creamer to thicken cream, to beat eggs, and to cream eggs and sugar
together.
Fit the selected attachment over the removable drive attachment, and slide it to the
bottom.
Lower the removable drive attachment into the centre of the jug, over the spindle. Put
the ingredients into the jug.
Do not fill past the 1500ml mark. If you do, the contents may force the lid off when you
start the motor.
Replace the lid, and turn it to bring the “arrow” on the lid over the “closed lock” on the
jug, to lock it in place.
To add ingredients while the motor is running: lift the pusher out of the feed chute, add
the ingredients via the feed chute, replace the pusher.

USING THE GRATING / SLICING ATTACHMENT
To fit the slicer or grater to the disc: insert the selected attachment into the centre of
the disc, lower the slicer/grater into the disc, secure the latch over the edge of the disc.
Lower the disc over the top of the spindle.
Replace the lid, and turn it to bring the “arrow” on the lid over the “closed lock” on the
jug, to lock it in place.
Remove the pusher, and slide the ingredients down the feed chute.
Replace the pusher, and use it to push the ingredients gently down the feed chute.
Do not use fingers or cutlery to push food down the feed chute –only the pusher.
The blade on top of the disc will slice or grate the food into the jug.
Do not let the jug get more than about half full –stop and empty it.
To remove the slicer or grater from the disc, ease the latch away from the side of the
disc, and lift the slicer/grater off.
USING THE MILL
Turn the mill base and bowl upside down.
Put the goods to be ground into the bowl –dry goods only.
Lower the mill base on to the bowl, then twist the base to the right, to lock it in place.
Turn the combined mill base and bowl the right way up.
Align the “arrow” on the bottom of the mill base with the “open lock” on the motor unit.
Lower the mill on to the motor unit, then turn, to align the “arrow” with the “closed lock”.
Turn the speed control in short bursts until you achieve the size of grind you want.
Turn the mill base to align the “arrow” with the “open lock”, and lift it off the motor unit.
Turn the mill base and bowl upside down.

Tap the bowl a couple of times to move all the grounds into the bowl. Hold the bowl,
turn the mill base clockwise, and lift it off.
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and
before cleaning.
Do not use bleach or other abrasive substance or solvents to clean your appliance as
it can be damaging to the finish.
Do not immerse the whole unit in water or any other liquid, or hold it under a running
tap to clean.
Unplug the unit from the mains before cleaning and storing away.
Clean soon after use, to prevent residues settling inside the jug/bowl.
Remove the jug/bowl from the motor unit. Wash the jug/bowl, lid and measuring cup
in warm soapy water, rinse well, then turn the jug/bowl upside downto drain and dry.
Keep hands out of the jug/bowl –BLADES ARE VERY SHARP.
If it is left for too long without cleaning and bits have glued themselves to the
inside of the jug/bowl, use a nylon brush to remove. If this does not work –crush a
few ice cubes in it.
Wipe the outside of the motor unit with a clean damp cloth.
Do not put the motor unit in water or any other liquid.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure
that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet or dirty.
Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating correctly,
please check the following:

You have followed the instructions correctly
That the unit has been wired correctly and that the wall socket is switched on.
That the mains power supply is ON.
That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:
The unit is packed carefully back into its original packaging.
Proof of purchase is attached.
A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Home Of Living Brands
(Pty) Limited service centre. Servicing outside the warranty period is still available, but will,
however, be chargeable.
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the stated current only. Connecting to other
power sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live