Russell Hobbs RHFP6010AU Installation instructions manual

RHFP6010AU_IB_RB_FA_030715
2 YEAR WARRANTY
RHFP6010AU
INSTRUCTIONS & WARRANTY
PERFORMANCE FOOD
PROCESSOR

Congratulations on the purchase of your new Russell Hobbs appliance. Each unit is manufactured
to ensure safety and reliability. Before using the appliance for the first time, please read this
instruction booklet carefully and keep it for future reference. Pass it on if you pass on the
appliance.
When using electrical appliances, basic safety precautions should always be followed.
1
2
5
6
7
4
8
10
11
18
20
16 15 17 12 13 14
21 19
1. Motor unit
2. Suction cup feet
3. Power cord
4. Digital control panel
5. Processor bowl
6. Centre post
7. Mini processor bowl
8. Processor bowl lid with feed chute
9. Multifunctional 3 piece food pusher
10. Externally adjustable slicing control
11. Removable blade shaft
12. S blade (chopping blade)
13. Mini S blade (for small workbowl)
14. Dough blade
15. Reversible shredding disc (coarse & fine)
16. Externally adjustable (thin to thick)
slicing disc
17. Dicing disc
18. Dicing blade
19. Dicing shaft
20. Dicing disc cleanout tool
21. Storage case
4
9

BEFORE FIRST USE
• Carefully remove all contents from the box.
• Take extreme care when unpacking and handling the sharp blades.
• As some parts may be packed separately, check to ensure all items have been unpacked
before disposing of the packaging.
• Clean all parts as instructed in the CARE AND CLEANING section of this manual.
• Select a level dry countertop where the appliance is to be used allowing air space on all
sides to provide proper ventilation for the motor.
USING YOUR FOOD PROCESSOR
Determine whether you will be using the S Blade, the Dough Blade, the Dicing Disc, the
Shredding Disc, the Slicing Disc or the mini S Blade.
IMPORTANT: Always make sure your food processor is unplugged and placed on a flat,
level surface before starting to assemble.
5