Ryobi CSD41 User manual

CSD41
GB 4V LITHIUM-ION SCREWDRIVER USER’S MANUAL 1
FR TOURNEVIS 4 V À BATTERIE LITHIUM-ION MANUEL D’UTILISATION 4
DE SCHRAUBENDREHER 4 V MIT LITHIUM-IONEN-AKKU BEDIENUNGSANLEITUNG 7
ES DESTORNILLADOR 4 V CON BATERÍA DE LITIO-ION MANUAL DE UTILIZACIÓN 11
IT CACCIAVITE 4 V CON BATTERIA AGLI IONI DI LITIO MANUALE D’USO 14
NL ACCU-SCHROEVENDRAAIER 4V LITHIUM-ION GEBRUIKERSHANDLEIDING 17
PT APARAFUSADORA 4 V COM BATERIA DE LÍTIO-IÃO MANUAL DE UTILIZAÇÃO 20
DK 4 V SKRUETRÆKKER MED LITHIUM-ION-BATTERI BRUGERVEJLEDNING 23
SE 4 V SKRUVDRAGARE MED LITIUMJONBATTERI INSTRUKTIONSBOK 26
FI 4 V LITHIUM-ION AKKURUUVINVÄÄNNIN KÄYTTÄJÄN KÄSIKIRJA 29
NO 4 V SKRUTREKKER MED LITIUM-ION BATTERI BRUKSANVISNING 32
RU ÄääìåìãüíéêçÄü éíÇÖêíäÄ 4 Ç (LI-ION) êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà 35
PL ŚRUBOKRĘT 4 V Z AKUMULATOREM LITOWO-JONOWYM INSTRUKCJA OBSŁUGI 38
CZ ŠROUBOVÁK 4 V S LITHIUM-IONTOVOU DOBÍJECÍ BATERIÍ NÁVOD K OBSLUZE 41
HU CSAVAROZÓ, 4 V, LÍTIUM-ION AKKUMULÁTOROS HASZNÁLATI ÚTMUTATÓ 44
RO ŞURUBELNIŢĂ 4 V CU BATERIE LITIU-ION MANUAL DE UTILIZARE 47
LV 4 V LITIJA-JONU AKUMULATORA SKRŰVGRIEZIS LIETOTĀJA ROKASGRĀMATA 50
LT SUKTUVO SU 4V LIČIO JONŲ BATERIJA NAUDOJIMO VADOVAS 53
EE 4V LIITIUM-IOON KRUVIKEERAJA KASUTAJAJUHEND 56
HR ODVIJA» 4 V S LITIJUM-IONSKOM BATERIJOM KORISNI»KI PRIRU»NIK 59
SI VIJAČNIK S 4 V LITIJEVO IONSKO BATERIJO UPORABNIŠKI PRIROČNIK 62
SK 4V LÍTIUM-IÓNOVÝ SKRUTKOVAČ NÁVOD NA POUŽITIE 65
GR ΚΑΤΣΑΒΙΔΙ 4 V ΜΕ ΜΠΑΤΑΡΙΑ ΛΙΘΙΟΥ-ΙΟΝΤΩΝ ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ 68
TR LİTYUM İYON BATARYALI 4 VʼLUK TORNAVİDA KULLANiM KILAVUZU 71
GB ORIGINAL INSTRUCTIONS FR TRADUCTION DES INSTRUCTIONS ORIGINALES DE ÜBERSETZUNG DER ORIGINALANLEITUNG ES TRADUCCIÓN
DE LAS INSTRUCCIONES ORIGINALES IT TRADUZIONE DELLE ISTRUZIONI ORIGINALI NL VERTALING VAN DE ORIGINELE INSTRUCTIES PT TRADUÇÃO
DAS INSTRUÇÕES ORIGINAIS DK OVERSÆTTELSE AF DE ORIGINALE INSTRUKTIONER SE ÖVERSÄTTNING AV DE URSPRUNGLIGA INSTRUKTIONERNA
FI ALKUPERÄISTEN OHJEIDEN SUOMENNOS NO OVERSETTELSE AV DE ORIGINALE INSTRUKSJONENE RU ПЕРЕВОД ОРИГИНАЛЬНЫХ ИНСТРУКЦИЙ PL TŁUMACZENIE
INSTRUKCJI ORYGINALNEJ CZ PŘEKLAD ORIGINÁLNÍCH POKYNŮ HU AZ EREDETI ÚTMUTATÓ FORDÍTÁSA RO TRADUCEREA INSTRUCŢIUNILOR ORIGINALE LV TULKOTS NO
ORIĢINĀLĀS INSTRUKCIJAS LT ORIGINALIŲ INSTRUKCIJŲ VERTIMAS EE ORIGINAALJUHENDI TÕLGE HR PRIJEVOD ORIGINALNIH UPUTA SI PREVOD ORIGINALNIH NAVODIL
SK PREKLAD POKYNOV VORIGINÁLI GR ΜΕΤΑΦΡΑΣΗ ΤΩΝ ΠΡΩΤΟΤΥΠΩΝ ΟΔΗΓΙΩΝ TR ORIJINAL TALIMATLARIN TERCÜMESI

6
1
2
4
5
3

7
9
6
11
10 12
13
14
16
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
8
2
15

Important! It is essential that you read the instructions in this manual before operating this machine.
Attention! Il est indispensable que vous lisiez les instructions contenues dans ce manuel avant la mise en service
de l’appareil.
Achtung! Bitte lesen Sie unbedingt vor Inbetriebnahme die Hinweise dieser Bedienungsanleitung.
¡Atención! Es imprescindible que lea las instrucciones de este manual antes de la puesta en servicio.
Attenzione! Prima di procedere alla messa in funzione, è indispensabile leggere attentamente le istruzioni contenute
nel manuale.
Let op! Het is van essentieel belang dat u de instructies in deze gebruiksaanwijzing leest vooraleer u dit toestel
in gebruik neemt.
Atenção! É indispensável que leia as instruções deste manual antes de utilizar a máquina.
OBS! Denne brugervejledning skal gennemlæses inden maskinen tage i brug.
Observera! Det är nödvändigt att läsa instruktionerna i denna bruksanvisning innan användning.
Huomio! On ehdottoman välttämätöntä lukea tässä käyttöohjeessa annetut ohjeet ennen käyttöönottoa.
Advarsel! Det er meget viktig at du leser denne brukerveiledningen før du tar maskinen i bruk.
Внимание! Перед сборкой изапуском инструмента необходимо ознакомиться синструкцией по эксплуатации.
Uwaga! Przed przystąpieniem do użytkowania tego urządzenia, należy koniecznie zapoznaćsięz zaleceniami
zawartymi w niniejszym podręczniku.
Důležité upozornění! Nepoužívejte tento přístroj dříve, než si přečtete pokyny uvedené v tomto návodu.
Figyelem! Feltétlenül fontos, hogy a jelen használati útmutatóban foglalt előírásokat az üzembe helyezés előtt
elolvassa!
Atenţie! Este esenţial săcitiţi instrucţiunile din acest manual înainte de operarea acestui aparat.
Uzmanību! Svarīgi, lai jūs pirms mašīnas darbināšanas izlasītu instrukcijas šajārokasgrāmatā.
Dėmesio! Prieš pradėdami eksploatuoti šįprietaisą, svarbu, kad perskaitytumėte šiose instrukcijose pateiktus
nurodymus.
Tähtis! Enne trelli kasutama hakkamist tuleb käesolevas juhendis esitatud juhised kindlasti läbi lugeda.
Upozorenje! Neophodno je da pročitate ove upute prije uporabe ovog uređaja.
Pomembno! Pred uporabo tega stroja, obvezno preberite navodila iz tega priročnika.
Dôležité! Pre prácou s týmto zariadením je dôležité, by ste si prečítali pokyny v tomto návode.
Προσοχή! Είναι απαραίτητο να διαβάσετε τις συστάσεις των οδηγιών αυτών πριν και τη θέση σε λειτουργία.
Dikkat! Cihazın çalıştırılmasından önce bu kılavuzda bulunan talimatlarıokumanız zorunludur.
Subject to technical modifications / Sous réserve de modifications techniques /Technische Änderungen vorbehalten /
Sujeto a modificaciones técnicas / Con riserva di eventuali modifiche tecniche /Technische wijzigingen voorbehouden /
Com reserva de modificações técnicas / Med forbehold for tekniske ændringer / Med förbehåll för tekniska ändringar /
Tekniset muutokset varataan / Med forbehold om tekniske endringer / Могут быть внесены технические изменения /
Z zastrzeżeniem modyfikacji technicznych / Změny technických údajůvyhrazeny / A műszaki módosítás jogát fenntartjuk /
Sub rezerva modificaţiilor tehnice / Paturam tiesības mainīt tehniskos raksturlielumus / Pasiliekant teisędaryti techninius pakeitimus /
Tehnilised muudatused võimalikud /Podložno tehničkim promjenama /Tehnične spremembe dopuščene/
Technické zmeny vyhradené / Υπό την επιφύλαξη τεχνικών τροποποιήσεων / Teknik değişiklik hakkısaklıdır

1
English
GB
FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR
GENERAL SAFETY RULES
CLASS 1 LED PRODUCT
SPECIAL SAFETY RULES
■ Hold po wer tool b y insulated gripping surfaces,
when performing an operation where the fastener
may contact hid den wiring. Cutting accessory
contacting a «live» wire may make exposed metal
parts of the power tool «live» and could give the
operator an electric shock.
CHARGER SAFETY
■ Do not expose charger to wet or damp conditions.
■ Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a risk
of fire, electric shock, or injuries to person.
■ To reduce risk of damage to charger body and
cord, p ull by charger plug rather than cord when
disconnecting charger.
■ Make sure cord is located so that it will not be stepped
on, tr ipped over, or otherwise subjected to damage
and stress.
■ An e xtension cord should not be used unless
absolutely necessar y. Use of improper extension
cord could result in a risk of fire and electric shock.
If extension cord must be used, make sure:
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on charger.
b. That extension cord is properly wired and in good
electrical condition.
■ Do not operate charger with a damaged cord or
plug. If damaged, have it replaced immediately by a
qualified serviceman.
■ Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman.
■ Do not disassemble charger ; take it to a qualified
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.
■ To reduce risk of electr ic shock, unplug the charger
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this risk.
■ Disconnect charger from power supply when not in use.
■ Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.
■ Save these instr uctions. Refer to them frequently and
use them to instruct others who may use this unit.
If y ou loan someone this unit, loan them these
instructions also.
SPECIFICATIONS
Motor 4 V DC
Switch Single Speed/Reversible
No load Speed 180 r/min.(RPM)
Clutch 12 Positions
Torque 5 Nm max
Collet 6.35 mm
Weight (included battery) 0.47 kg
Charger Rating
Input 230V-AC ~ 50Hz
Output 4.5V-DC
160 mA
Charge Time 10-12 hours
DESCRIPTION
1. Quick change chuck
2. LED worklight
3. Direction of rotation selector
(forward/reverse/center lock)
4. Switch Trigger
5. Grip zone
6. Charger
7. Red charge light
8. Input jack
9. Charger plug
10. To decrease torque
11. To increase torque
12. Torque adjustment ring
13. Reverse
14. Forward
15. Collet
16. Bit
OPERATION
WARNING
Do not allow familiarity with products to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.

2
English
GB
FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR
OPERATION
WARNING
Always w ear safety goggles or safety glasses
with side shields when operating products .
Failure to do so could result in objects being
thrown into your eyes, resulting in possible
serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
■Driving screws with screwdriver bits
■Light-duty drilling
TO CHARGE (Fig. 2)
When charging the screwdriver, a red charge light will
illuminate on the handle of the screwdriver. This red charge
light will go off when the screwdriver is fully charged.
■Insert charger plug into input jac k making sure it is
properly connected.
■Charger can be used with normal household voltage
of 230 V, 50Hz, AC only.
■Connect charger to power supply.
■After normal usage, a minimum of 10-12 hours charging
time is required to fully recharge the screwdriver.
■Do not place charger in an area of extreme heat or
cold. It will work best at normal room temperature.
■Remove the product from the charger once it is fully
charged and ready for use.
WARNING
Battery products are always in operating condition.
Therefore, the switch should always be locked
when not in use or carrying at your side.
ADJUSTABLE TORQUE CLUTCH
This screwdriver is equipped with an adjustable torque
clutch for dr iving different types of screws into different
materials. The proper setting depends on the type of
material and the size of screw you are using.
ADJUSTING TORQUE (Fig. 3)
There are twelve torque indicator settings located on the
front of the screwdriver.
■Rotate adjustment ring to desired setting, aligning
number on adjustment ring with arrow on housing.
1 - 2 For driving small screws
3 - 4 For driving screws into soft material
5 - 7 For driving screws into soft and hard
materials
8 - 9 For driving screws into hard wood
10 - 11 For driving large screws
For full power applications
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK) (Fig. 4)
The direction of bit rotation is reversible and is controlled
by a selector located above the switch tr igger. With
the screwdriver held in normal operating position,
the direction of rotation selector should be positioned
to the left of the switch trigger for forward motion.
The direction is reversed when the selector is to the right
of the switch trigger.
Setting the switch trigger in the OFF (center lock) position
helps reduce the possibility of accidental starting when
not in use.
To stop the screwdriver, release the switch tr igger and
allow the collet to come to a complete stop.
OPERATION
QUICK CHANGE CHUCK (Fig. 5)
A quic k change chuck mounted on the screwdriver is
easy for inserting or removing the bits. To inser t a bit,
insert the bit into collet till lock. To remove a bit, simply
pull the sleeve of collet forward.
SPINDLE LOCK
The screwdriver spindle is locked when the On/Off switch
is not pressed.
This enables scre ws to be screwed in, even when the
battery is empty.
GRIP ZONE
Soft grip reduces the danger of slipping and thereby
improves the grip on the tool and handing.
At the same time, the r ubber coating achieves a
vibration-reducing effect.
LED WORKLIGHT (Fig. 6)
The screwdriver has a built-in LED worklight. This feature
is convenient when working in close or tight areas where
additional light is needed. Whenever the switch trigger is
depressed, the LED worklight will illuminate.
NOTE: During normal operation, if the LED worklight will

3
English
GB
FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR
not illuminate, charge the screwdriver.
MAINTENANCE
WARNING
When servicing, use only identical replacement
parts. Use of any other parts may create a
hazard or cause product damage.
WARNING
Always w ear safety goggles or safety glasses
with side shields during product operation or
when blowing dust. If operation is dusty,
also wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use .
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline ,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
Do not open the battery yourself. There is a danger of
short circuit.
Only the parts shown on the parts list are intended to
be repaired or replaced by the customer . All other parts
should be replaced at an Authorized Service Center.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as w aste. The machine, accessor ies and
packaging should be sorted for
environmental-friendly recycling.
SYMBOLS
Safety Alert
V Volts
min-1 Revolutions or reciprocations per minute
Direct current
CE Conformity
Please read the instructions carefully before
starting the machine.
Recycle unwanted
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with y our
Local Authority or retailer for recycling advice.