SAFAVIEH COUTURE Cece FOX9080A User manual

CARE AND MAINTENANCE
For cleaning of the frame, use a mild,soapy water, then dry the surface immediately with a
clean,soft cloth.For glass,dust with a soft,dry cloth.Do not use abrasive cleaner.
To use of washing powder or any other substances containing abrasives may scratch the glass.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
FOX9080A
DIMENSIONS: 29.92"L x 15.74"W x 31.49"H
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
A Stainless Steel Frame 1X
B Mirror Glass Top 3X
C Wheel with Screws 6*0.5*15mm 4X
WEIGHT CAPACITY: 150 LBS
HW1 Suction Cup 8X
HW2 Wrench 1X
WARNING: DO NOT STAND ON BAR CART
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
The wheels and hardware is hang on the Frame

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Wrench
STEP1 PUT STAINLESS STEEL FRAME(A) FACE DOWN AS
PICTURE ON A CLEAN, NON-MARRING SURFACE
STEP2 INSTALL THE WHEELS(C) INTO THE STAINLESS STEEL
FRAME(A), TURNING ANTICLOCKWISE,TIGHTEN BY USING
WRENCH
STEP3 TURN THE BAR CART RIGHT SIDE UP,INSERT THE BACK
OF SUCTION CUP INTO THE SIX MOUNTING POSITIONS ON THE
STAINLESS STEEL FRAME(A)
STEP4 CAREFULLY PLACE THE MIRROR GLASS TOP(B) ONTO
THE STAINLESS STEEL FRAME(A)
STEP5 CHECK FOR STABILITY. ENSURE ALL WHEELS ARE FULLY
LOCKED AND SECURED INTO POSITION. YOUR BAR CART IS
NOW READY FOR USE
The wheels and hardware is hang on the Frame
1
2
4
5
3
6