SAFAVIEH COUTURE SFV5743A User manual

The legs and hardware are located under the drawer
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
H3 Allen key 4 mm
1X
4X
Flat washer 16 mm
Allen bolt 60x6 mm
A
B
H1
H2
Cabinet
Leg
4X
4X
1X
PIECE QUANTITY
DESCRIPTION PICTURE
Item# NST9008A
Product dimensions: 22.8"L* 17.7"W*17.7"D
WARNING
Weight Capacity - 110 LBS
Warning : Do not stand on Table
Warning : Do not over torque bolts.
Item# SFV5743A
Product dimensions: 22.8"W* 17.7"D*17.7"H
WARNING
Weight Capacity - 66 LBS
Warning : Do not stand on Nightstand
Warning : Do not over torque bolts.
NOTICE
* Please make sure that you have all parts indicated and are in good condion before you begin assembly
of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email [e-mail]
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
PREPARATION
contents list and hardware contents list.
Part List and Hardware List
Hw3 Allen key
1X
4X
Flat washer 16 x 8 mm
Allen bolt 6 X 1 X 60 mm
A
B
Hw1
Hw2
Cabinet
Leg
4X
4X
1X
PIECE DESCRIPTION PICTURE QUANTITY
• Sit only on structures designed for that purpose
Protect surfaces from fire and excessive heat
• Be careful about what you place on a piece of furniture
do not keep hot items like coffee mugs, hot iron etc. directly on surface.
Avoid contact of furniture surface to any Organic solvents.
When lifting a chair, remember that the seat rail is its strongest part, not the chair back.
Frequently lifting by the back, especially the crest rail, will eventually result in breakage. For
small chairs, lift by the side seat rails, one hand near the front on one side, the other near
the rear on the other side
Whenever possible, lift the table
carefully from the apron, never by the top or legs.
the move.
Whenever possible,
wrap padding around a table's legs before moving it to prevent chipping or breakage during
Wood
furniture usually needs to be cleaned only when there is a buildup of wax or dirt
Loose dust on the surface can be removed with a soft, lint-free cloth, gently rubbed over
the surface
residues, followed by a dry soft cloth.
For finished wood, dampen a cotton cloth with the solvent or cleaning solution, and gently
rub over a small area at a time. Avoid using too much liquid, as they can cause damage.
Then, wipe the cleaned surface with a clean dampened cloth to remove any cleanser
Dusting and cleaning your metal furniture is very important. It should be done with a soft cotton towel or cloth to avoid scratches. At times mild detergent and
water solution can be used but once the washing is done, dry it using a soft towel.
*For cleaning surface of wood , dampen a cloth with diluted solvent or cleaning soluon and gently
rub over a small area at a me. Finally wipe the area with clean dampened cloth to remove any cleanser.
*Do not keep hot items like coffee mugs, hot iron etc. directly on surface.
*Avoid contact of furniture surface to any organic solvents.

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
PREPARATION
6x
H1 H2
H3
A
B
B
B
B
A
B
B
B
B
The legs and hardware are located under the drawer
STEP2 PLACE THE BEDSIDE (A)
UPSIDE DOWN AS SHOWN.
STEP3 ALIGN THE LEGS (B) WITH
THE POSITION ON THE BOTTOM
OF BEDSIDE (A).
STEP1 OPEN THE ZIPPER ON THE
INSIDE OF THE DRAWER AND
TAKE OUT LEGS AND HADWARE.
STEP4 INSERT ALLEN BOLT (H1)
WITH WASHER (H2) AND TIGHTEN
WITH ALLEN KEY (H3).
STEP5 FLIP THE BEDSIDE
UPSIDE.
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Leg
STEP1
Unwrap the legs & take out legs.
Hardware
Open the hardware pouch & take out hardware.
STEP2
Place the Nightstand upside down on a clean surface.
Align legs on both sides of Nightstand as per side holes
present on either side of Nightstand.
STEP3
Put the washer on the Bolt in the order shown in
picture.
Hw2
STEP4
Insert Allen Bolt (Hw1) with Washer (Hw2)
ghten with Allen Key (Hw3).Don’t over ghten.
Hw1 Hw3
Hw2 Hw1
Hw2
Hw1
Hw3
STEP5
Repeat step 4 for, other side leg, flip the Nightstand upright with help.
B
B
B
B
A