SAFAVIEH COUTURE SFV5535A User manual

Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items on items can discolor wood.
Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft line free cotton cloth dampened with water or furniture polish.
On highly used surfaces we recommend applying a quality paste wa , which should be used on a regular basis to provide
additional protection from scratches and spills.
How often you apply the wa depends on how much wear the furniture receives.
CARE AND MAINTENANCE
∗ Please make sure that you have all parts indicated before you begin assembly of this item
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.
NOTICE
PIECE DESCRIPTION PICTURE QUANTITY
A
B
HW1
CABINET
LEG
8mm 16mm
8mm 15mm
ALLEN BOLT
6X0.5X20MM
ALLEN KEY
1X
2X
8X
8X
1X
Model #SFV5535A
Product dimensions: 68”W 18”D 30”H
Part List and Hardware List
8X
HW2
HW
HW4
Weight capacity: 200 LBS
WARNING: DO NOT STAND ON SIDE BOARD
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
SHELF PIN
HW5
8X
C
SHELF 2X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 15 minutes.
PREPARATION
STEP 1: Lay the cabinet A as shown in figure, place leg B in the cabinet A then insert
washer HW1, lock washer HW2, Allen bolt HW3 and tighten with the help of Allen
key HW4
HW1
HW2
HW4
HW
4X
Straighten the cabinet, now your item is ready to use.
A
B
B