SAFAVIEH COUTURE Curtis SFV4760 User manual

CARE AND MAINTENANCE
NOTICE
B
C
SAFAVIEH
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
C O U T U R E
D
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
CARE AND MAINTENANCE
Left arm
The Body part, Legs and hardware are located in the carton.
HW2
HW1
Flat Washer(M8)
Split Lock Washer(M8)
Leg
Right arm
Back
Back pillow
E
F
WARNING: DO NOT STAND ON CHAISE
WARNING: DO NOT OVER TORQUE WASHER/SCREWS
1X
4X
1X
1X
1X
13X
13X
Socket Screws 8 *1.25*65MM
Allen Key
HW3
HW4
13X
1X
SFV4760
Dimensions:42.32"*63.00"*36.22"
Weight Capacity: 550 lbs

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
PREPARATION
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
C
DA
F
STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF
THE SEAT AND TAKE OUT LEGS AND HARDWARE. STEP2 PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
STEP4 CONNECT THE LEFT ARM WITH THE SEAT
BY CONNECTORS AS SHOWN.THEN REPEAT THE
SAME STEP TO CONTECT THE RIGHT ARM.
STEP5 PUT THE BACK PILLOW ON THE CHAISE, IT'S
NOW READY TO USE.
The Body part, Legs and hardware are located in the carton.
D
A
F
B
D
B
C
F
F
E
HW2 HW1 HW3
HW4
HW4
STEP5 INSERT THE LEGS BY SCREW (AS STEP2
SHOWN) IN THE SCREWS ,TIGHTEN THE SCREW BY
USING WRENCH(HW4) AS SHOWN.
STEP3 CONNECT THE BACK WITH THE SEAT BY
SCREWS(AS STEP2 SHOWN) ,TIGHTEN THE
SCREWS BY USING WRENCH (HW4) AS SHOWN.