SAFAVIEH COUTURE SFV4818 User manual

HW2 Flat Washer(M8) 2X
BFront Leg 2X
HW1 Split Lock Washer(M8) 2X
CBack Leg 2X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
HW3 Socket Screws 8*1.25*50MM 2X
HW4 Allen Key 1X
ASeat 1X
Model#: SFV4818
Dimensions:31.1"WX32.5"DX29.3"H
C O U T U R E
Weight Capacity: 275 lbs
Warning: Do not stand on Chair
Warning: Do not over torque bolts
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
PREPARATION
CARE AND MAINTENANCE
* Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
* The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]

PREPARATION
STEP5 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL
LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH
ALLEN KEY WHILE THE CHAIR IS UPRIGHT AS
PICTURED ABOVE(IF THE CHAIR WOBBLY, YOU CAN
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
STEP1 OPEN THE CARTON, TAKE OUT THE BODY,
LEGS AND HARDWARE INSIDE.
STEP4 REPEAT THE SAME STEP FOR THE OTHER
BACK LEG, AND THEN INSERT THE LEGS AND
SCREW IN THE SCREWS BUT DON'T TIGHTEN
COMPLETELY.
A
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PREPARATION
A
B B
STEP2 ROTATE THE FRONT LEGS UNTIL TIGHTEN
AS SHOWN IN THE PICTURE.
A
B B
C
STEP3 ROTATE THE BACK LEG UNTIL TIGHTEN AS
SHOWN IN THE PICTURE.
A
B B
CC
HW2 HW1 HW3
HW4