SAFAVIEH COUTURE Blakelynn SFV8725A User manual

PIECE QUANTITY
A1X
B
HW1
TABLE TOTAL WEIGHT CAPACITY: 110 LBS
WARNING: DO NOT STAND ON DESK
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
body
Part List and Hardware List
DESCRIPTION PICTURE
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
SFV8725A
DIMENSIONS: 47.2"L x 22.2"D x 33.8"H
4X
8X
legs
screw M6*1.2*16MM
HW2
allen wrench M6
8X
8X
4X
16X
1X
2X
HW3
Angle
HW4
HW5
screw M8*1.2*55MM
screw M8*1.2*20MM
allen wrench M81X
4X
washer 8*17*1.5MM
metal plate
HW6
HW7
HW8
HW9screw M4*1.0*14MM
1X
C
1X
D
E1X
1X
F
G1X
HW10
HW11 connecting lever
fastening
16X
16X
top drop panel
back panel
standing panel
left side panel
right side panel
HW12
cover sticker 16X
1X
Hmetal
3X
screw M6*1.0*25MM
HW13
HW14 4X
shelf supporter

STEP1 assemble connecting lever on the body.
STEP3assemble back panel and left & right side panel.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly (included): Allen Key
HW11*8
A
G
F
HW11*4
STEP assemble connecting lever on the left & right side panel;shelf supporter on the side panel.
2
D
HW12*4
HW13*4
HW14*4
F
G

STEP4 assemble back panel and side panel on the body.
STEP6assemble metal on the drop panel.
HW13*8
HW12*8
STEP5 assemble connecting lever on the top drop panel.
HW11*4
C
HW10*3
HW6 H

HW12*2
HW13*2
E
E
2x
STEP7 assemble standing panel on the drop panel.
HW1*2
HW4*1
HW6
B
4x
STEP8 assemble legs and metal plate.

STEP9 assemble metal plate on the body.
HW5*2
HW3*2
HW7
A
4x
B
HW5*2
HW2*2
HW7
4x
STEP10 assemble legs on the body.

STEP11 assemble the angle on the body.
STEP12 assemble drop panel on the body.
HW8
HW9*1
2x

STEP13 assemble the angle on the wall.
HW8
HW9*1
2x