SAFAVIEH COUTURE Gabribella SFV9709 User manual

NOTICE
Weight Capacity : 112.5 lbs
WARNING : DO NOT STAND ON COFFEE TABLE
WARNING : DO NOT OVER TORQUE BOLTS/SCREWS
WARNING : HEAVY PRODUCT
* Please make sure that you have all parts indicated and they are in good condion before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
ITEM ID : SFV9709
PRODUCT DIMENSION : 35.5"WX35.5"DX13.5"H
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Require 1-2 person for assembly.
Always use felt pads under all arcles to prevent discoloraon or soening of the lacquer. Plasc and
rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such
as hot dishes, harsh solvents and abrasives. Cleaning should be done with a so lint free coon cloth
dampened with water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide addional protecon from scratches and
spills. How oen you apply the wax depends on how much wear the furniture receives.
CARE AND MAINTENANCE
Piece Descripon Picture Quanty
A
B
Wooden Top
Wooden Base
1x
1x
PARTS & HARDWARE LIST
Carton call
1 of 2
2 of 2
WARNING

A
B
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1: Carefully place the top on base aligning the bolt underneath. STEP 2: Turn the top clockwise unl firmly gripped.
STEP 3: Table is now ready for use.
*Note-Tightening too much can damage the base insert.