SAFAVIEH COUTURE SFV4752-K User manual

CARE AND MAINTENANCE
NOTICE
1X
B1X
4X
C2X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
2X
4X
A1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening C O U T U R E
WARNING: DO NOT STAND ON BED
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
D
E
F
G
12X
HW2
1X
Wrench
Dimensions: 85.4"WX87"DX57.9"H
Weight Capacity: 825 lbs
SFV4752-K
Headboard
Footboard
Bed Legs
Slat
Cross Slat
Support Leg for Cross Slat
HW1
Phillips Screws 4*2*40MM
The legs and hardware are located inside the sideboard&slat boxs.
HW3
HW4
HW5
12X
12X
1X
12X
HW6
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.25*30MM
Allen Key
Sideboard(L&R)

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included): Allen key/wrench
PREARATION
STEP3 Rotate the slat legs G to the middle rod F
of slat E. Put it inside the middle of the
bed,
And then, smooth the slat E inside the bed.
Assembl the slat legs"H" with part ofAssembl the slat legs"H" with part ofAssembl the slat legs"H" with part of Assembl the slat legs"H" with part of
X2
D
X2
A
STEP2 Attach the sideboard Cwith headboard A and footboard B
by sliding the iron plates onto the bolts, the metal card should be
alignment card slot when install it,then press it lightly. Reminder:If
it's hard to install,you can rotate out the bolts first,and then put the
iron plates here before tighten.
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
STEP4 Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slatRotate the slat legs H to the middle rod of slat STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat
to make sure it stable, it's shown in step 4
F
E
G
STEP4 Secure the slat with screw HW1 by using
wrench HW6.There are totally 12 holes on slat to
make sure it stable, it's shown in step 3.
The legs and hardware are located inside the sideboard&slat boxs.
X2
HW4
HW5
HW2
HW3
B
STEP1 Attach bed legs D with headboard A and
footboard B by using Allen key HW5 and hardware
HW2, HW3 and HW4 as shown, tighten until secure.
C/L C/R
HW1
HW6
It's finished as shown,Your Bed is
ready for use.

CARE AND MAINTENANCE
NOTICE
Part List and Hardware List
SAFAVIEH
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening C O U T U R E
WARNING: DO NOT STAND ON BED
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Dimensions: 69.7"WX87"DX57.9"H
Weight Capacity: 825 lbs
SFV4752-Q
The legs and hardware are located inside the sideboard&slat boxs.
1X
B1X
4X
C2X
PIECE DESCRIPTION PICTURE
QUANTITY
1X
2 X
A1X
D
E
F
G
9X
HW2
1X
Wrench
Headboard
Footboard
Bed Legs
Slat
Cross Slat
Support Leg for Cross Slat
Phillips Screws 4*2*40MM
HW1
HW3
HW4
HW5
12X
12X
1X
12X
HW6
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.25*30MM
Allen Key
Sideboard(L&R)

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included): Allen key/wrench
PREARATION
STEP3 Rotate the slat legs G to the middle rod F
of slat E. Put it inside the middle of the
bed, And then, smooth the slat E inside the bed
HW1
Assembl the slat legs"H" with part ofAssembl the slat legs"H" with part ofAssembl the slat legs"H" with part of Assembl the slat legs"H" with part of
STEP2
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
STEP4 Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slatRotate the slat legs H to the middle rod of slat STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat
to make sure it stable, it's shown in step 4
F
E
G
STEP4 Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat to
make sure it stable, it's shown in step 3.
The legs and hardware are located inside the sideboard&slat boxs.
D
A
HW4
HW5
HW2
HW3
B
STEP1 Attach bed legs D with headboard A and
footboard B by using Allen key HW5 and hardware
HW2, HW3, HW4 as shown, tighten until secure.
HW6
C/L
C/R
It's finished as shown,Your Bed is
ready for use.
Attach the sideboard Cwith headboard A and footboard
Bby sliding the iron plates onto the bolts,the metal card should be
alignment card slot when install it,then press it lightly. Reminder:If
it's hard to install,you can rotate out the bolts first,and then put the
iron plates here before tighten.