SAFAVIEH COUTURE Tourmaline SFV4722A User manual

CARE AND MAINTENANCE
NOTICE
Weight Capacity: 275 lbs
WARNING: DO NOTSTAND ON BENCH
WARNING: DO NOTOVER TORQUE BOLTS/SCREWS
EMetal Gasket(M8) 14X
BSide Legs 4X
C
Spring washer(M8)
1X
Part List and Hardware List
PIECE DESCRIPTION PICTURE
QUANTITY
SAFAVIEH
C O U T U R E
The legs and hardware are located in the carton.
F
Bolt(M8*40mm)
12X
G
Allen key
12X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening SFV4722A
Dimensions: 48"W*18"D*18"H
Middle rod
H
K
J
Bolt(M8*65mm)2X
2X
1X
Plastic Gasket(M8)

PREPARATION
STEP3 INSERT THE LEGS AND SCREW IN THE BOLTS BUT DON'T TIGHTEN COMPLETELY. REPEAT THE SAME STEPS FOR THE OTHER THREE LEGS, THEN USE THE LONG SCREW TO CONNECT FOUR LEGS WITH THE MIDDLE ROD.
STEP4 PUT THE BENCH UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE THE BENCH IS UPRIGHT AS PICTURED ABOVE
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen key
STEP1 Open the carton, you can find the bench seat , legs and hardward
STEP2 PUT THE WASHERS ON THE BOLT AS SHOWN IN THE PICTURE
.