SAFAVIEH COUTURE Giabella SFV9715 User manual

ITEM ID : SFV9715
PRODUCT DIMENSION : 16"WX16"DX20"H
Weight Capacity : 30 lbs
WARNING : DO NOT STAND/SIT ON SIDE TABLE
WARNING : DO NOT DRAG SIDE TABLE
WARNING : HEAVY PRODUCT
NOTICE
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
- Blot up spills immediately, always use coasters on table tops under beverages. Use trivets or mats
under hot dishes or cookware. Clean with warm water and dry surface immediately aer cleaning.
Do not use cleaners that contain acid such as bathroom cleaners, grout cleaner, and le cleaners.
Do not use abrasive cleaners in either dry or liquid forms. Use a cleaner and polish formulated for
marble surfaces.
PARTS & HARDWARE LIST
WARNING
* Please make sure that you have all parts indicated and they are in good condion before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
C O U T U R E
Marble Top
Legs
Assembly Plate
JCB Bolts 16x8mm
CSK Bolts 30x8mm
Flat Washer 25x8mm
Allen Key 5mm
A
B
C
HW1
HW2
HW3
HW4
1x
3x
1x
3x
6x
3x
1x
Piece Descripon Picture Quanty Carton Call
1 of 2
2 of 2
1 of 2
1 of 2
1 of 2
1 of 2
1 of 2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1: Place all 3 legs (B) upright on a so surface. Screw the assembly plate (C)
onto the legs by using the Allen key (HW 4) to screw in the CSK Bolts (HW2).
STEP 2:Place the marble top (A) onto assembled base while matching up the screw holes.
Use the Allen key (HW4) to screw in the JCB Bolts (HW1) through the Flat Washers (HW3)
and aach the assembled base to the marble top.
HW2,6x
HW4,1x
HW1,3x
HW4,1x
HW3,3x
C
B
A