Safavieh Furniture AMH5733 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item. Refer to part
list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
* This item may require a pair of pliers to unscrew the screws to a suitable length during assembly when
feet are too short to fit into the item.
Item#AMH5733
PREPARATION
Product Dimensions: 47" W x 16" D x 20.25" H
*Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and
rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as
hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth
dampened with water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection from sratches and
spills. How often you apply the wax depends on how much wear the furniture receives.
Part List and Hardware List
PIECE DESC. PICTURE
QUANTITY
PIECE DESC. PICTURE QUANTITY
A Table Top 1X B Right Middle
Panel 1X Weight Capacity: 175LBS
C Left Middle Panel 1X D Right Side
Panel
1X Warning: Do not stand on the Bench
E Left Side Panel 1X F Back Panel 1X Warning: Do not over torque bolts.
G Bottom Panel 1X H Cushion 1X Additional Tools Required
I Basket Frame 3X J Basket
Bottom
3X Screwdriver (not include)
HW1 Phillips Screws
6.14x1.27x35mm
16X HW2 Allan Key
Driver
1X
HW3 Allen bot
5x1x14mm
12X

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Step 1: Put the bench top(A) upside down, attached the
middle panel (B) and (C) to the bench top (A) by using 4pc
longer screws(K).
Step 2: Attached the right panel (D) and left panel (E)
to the bench top(A) by using 4pc longer to the bench
top(A) by using 4pc longer screws (K).
Step 3: Insert the back panel (F) to the groove of the left
panel(E) and right panel(D).
Step 4: Put the bottom panel(G) over the back panel(F) middle
panel(B)&(C),make sure back panel(F) insert the bottom groove of
bottom panel(G). Using 8screws(K) to connect bottom panel(G)
with middle panel(B)&(C), right and left panel(D)&(E).
Step 5: Open up the basket frame(I), attach the basket
bottom(J) to basket frame(I) by using 4 Shorter
Screws(M) and Allan Key Driver (L).
Step 6: Turn the bench up to right side, put on the cushion
and baskets.