Safavieh Outdoor Willamy PAT6761 User manual

Part List and Hardware List
MODEL# PAT6761
Product Dimension: 53.15”W x 13.78”D x 17.72”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
Seat
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench
Weight capacity : 600 lbs.
NOTICE
A
B
C1
C2
Leg
Allen bolt
Allen key
1x
4x
4x
1x
M8x50

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
PREPARATION
Step 1: attach the leg (B) to the seat (A) as shown on the picture.
Using the Allen bolt (C1) and tighten all with the Allen Key (C2) as shown on the picture.
Make sure all the Allen bolt is tighten before use .
1
C1
C2
C1
C1
B
A
BB
BC1

MODEL# PAT 6761
Product Dimension: 68.90”W x 28.74”D x 74.02”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Part List and Hardware List
Warning : Do not torque bolts / screws
Warning : Do not stand on the table
Weight capacity : 40 lbs.
Leg
Table top
Allen Screw L
Allen Screw S
Allen key
PIECE DESCRIPTION PICTURE QUANTITY
2 x
2 x
2 x
1 x
8 x
1 x
2 x
8 x
1 x
1 x
M6x65
M6x70
M6x50
A
B
C
D
E
F1
F2
F3
F4
F5
Top bar
Connection bar
Support bar
Wrench
Allen bolt

Step 3 : attach the leg (A) to the other side of table top (D)
as shown on the picture .Repeat assembly same step 2 .
3
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench .
PREPARATION
Step 4 : put the support bar (C) under table as shown on the
Allen key (F5).
1
Step 1 : attach connection bar (B) to the table top (D).
Using the allen screw S (F3) and tighten with the Allen
key (F5) as shown on the picture. Both side are same.
Step 2 : attach the leg (A) to the table top (D) as shown on
the picture. Using the allen bolt (F1) and tighten with the
wrench (F4) and the allen key (F5).
2
D
C
C
A
A
F3
F3
F3
F3
F3
4
picture. Using the Allen screw S (F3) and tighten with the
F3
F3
F3 F3
D
F3 B
D
F5
F3
F1
F1
F1
F4
F5
F1
F1
F1
F1
A
D
A
F1
F1
F1 F1
F4
A
A
D
F4
F5
F1
F1
F1
F1

Step 5 : put the top bar (E) on top the leg (A) as shown on the picture.
Tighten the Allen screw L (F2) with the Allen Key (F5).
5
F2 F2
F2
E